Get ready for release 2.3.0

.gitignore

@@ -1,5 +1,3 @@
-*.pyo
-*.pyc
 *_dis
 *~
 /.cache
@@ -10,11 +8,7 @@
 /__pkginfo__.pyc
 /dist
 /how-to-make-a-release.txt
-/nose-*.egg
 /tmp
 /uncompyle6.egg-info
-/unpyc
 __pycache__
 build
-/.venv*
-/.idea

.travis.yml

@@ -3,16 +3,14 @@ language: python
 sudo: false
 
 python:
-  - '2.7' # this is a cheat here because travis doesn't do 2.4-2.6
+  - '2.6'
+  - '2.7'
+  - '3.4'
+  - '3.5'
 
 install:
-- pip install -e .
+- pip install -r requirements.txt
 - pip install -r requirements-dev.txt
 
 script:
 - python ./setup.py develop && COMPILE='--compile' make check
-
-# blacklist
-branches:
-  except:
-    - data-driven-pytest

DECOMPYLE-2.4-CHANGELOG.txt

@@ -1,131 +0,0 @@
-This is the changelog from *decompyle*'s release 2.4 and before
-passed on by Dan Pascu
-
-
-release 2.4 (Dan Pascu)
-  - Replaced the way code structures are identified by the parser.
-    Previously, the scanner introduced some COME_FROM entries in the
-    dissasembly output to mark all the destinations of jump instructions.
-    Using these COME_FROM labels the parser was then able to identify the
-    code structures (if tests, while loops, etc). Up to python-2.3 this was
-    possible because the code structures were clearly defined and jump
-    targets were always to the same points in a given strcuture making it
-    easy to identify the structure. Python 2.3 however introduced optimized
-    jumps to increase code performance. In the previous version of decompyle
-    (2.3) we used a technique to identify the code structures and then used
-    these structures to determine where the jump targets would have been if
-    not optimized. Using this information we then added COME_FROM labels at
-    the points where they would have been if not optimized, thus emulating
-    the way decompyle worked with versions before python 2.3. However with
-    the introduction of even more optimizations in python 2.4 this technique
-    no longer works. Not only the jump targets are no longer an effective
-    mean for the parser to identify the code structures, but also trying to
-    emulate the old way things were solved when it clearly no longer works
-    is not the right solution. To solve this issue, the code to identify the
-    structures that we had developed in version 2.3, was used to add real
-    start/end points for strcuture identification, instead of the COME_FROM
-    labels. Now these new start/end labels are used by the parser to more
-    precisely identify the structures and the COME_FROM labels were removed
-    completely. The scanner is responsible to identify these code structures
-    and use any knowledge of optimizations that python applies to determine
-    the start/end points of any structure and then mark them with certain
-    keywords that are understood by the parser.
-  - Correctly identify certain `while 1' structures that were not
-    recognized in the previous version.
-  - Added support for new byte code constructs used by python 2.4
-
-release 2.3.2
-  - tidied up copyright and changelog information for releases 2.3 and later
-
-release 2.3.1 (Dan Pascu)
-  - implemented a structure detection technique that fixes problems with
-    optimised jumps in Python >= 2.3. In the previous release (decompyle 2.3),
-    these problems meant that some files were incorrectly decompiled and
-    others could not be decompiled at all. With this new structure detection
-    technique, thorough testing over the standard python libraries suggests
-    that decompyle 2.3.1 can handle everything that decompyle 2.2beta1 could,
-    plus new Python 2.3 bytecodes and constructs.
-
-release 2.3 (Dan Pascu)
-  - support for Python 2.3 added
-  - use the marshal and disassembly code from their respective python
-    versions, so that decompyle can manipulate bytecode independently
-    of the interpreter that runs decompyle itself (for example it can
-    decompile python2.3 bytecode even when running under python2.2)
-
-——————————————————
-
-release 2.2beta1 (hartmut Goebel)
-  - support for Python 1.5 up to Python 2.2
-  - no longer requires to be run with the Python interpreter version
-    which generated the byte-code.
-  - requires Python 2.2
-  - pretty-prints docstrings, hashes, lists and tuples
-  - decompyle is now a script and a package
-  - added emacs mode-hint and tab-width for each file output
-  - enhanced test suite: more test patterns, .pyc/.pyo included
-  - avoids unnecessary 'global' statements
-  - still untested: EXTENDED_ARG
-
-  internal changes:
-  - major code overhoul: splitted into several modules, clean-ups
-  - use a list of valid magics instead of the single one from imp.py
-  - uses copies of 'dis.py' for every supported version. This ensures
-    correct disassemling of the byte-code.
-  - use a single Walker and a single Parser, thus saving time and memory
-  - use augmented assign and 'print >>' internally
-  - optimized 'Walker.engine', the main part of code generation
-release 0.6.0: (hartmut Goebel)
-  - extended print (Python 2.0)
-  - extended import (Python 2.0) (may not cover all cases)
-  - augmented assign (Python 2.0) (may not cover all cases)
-  - list comprehensions (Python 2.0)
-  - equivalent for 'apply' (Python 1.6)
-  - if .. elif .. else are now nested as expected
-  - assert test, data
-  - unpack list corrected (was the same as unpack tuple)
-  - fixed unpack tuple (trailing semicolon was missing)
-  - major speed up :-)
-  - reduced memory usage (pre-alpha-0.5 has increased it a lot)
-  - still missing: EXTENDED_ARG
-
-pre-alpha-0.5: (hartmut Goebel)
-  - *args, **kwargs
-  - global
-  - formal tuple parameters (eg. def a(self, (x,y,z)) )
-  - actual lambda parameters (eg.  X(lambda z: z**2) )
-  - remove last 'return None' in procedures
-  - remove last 'return locals()' in class definitions
-  - docstrings
-
-pre-alpha-0.4: (hartmut Goebel)
-  - assert
-  - try/except/finally
-  - parentheses in expressions
-  - nested expressions
-  - extracted dissassemble() from module dis and
-    removed ugly redirect of stdout, thus saved a lot of
-    ugly code and a lot of memory
-
-pre-alpha-0.3: (hartmut Goebel)
-  - keyword arguments
-  - some boolean expressions
-  - and/or
-  - complex conditions in if/while
-  - read byte-code from .pyc without importing
-  - access to the body of classes and modules
-  - class and function definitions
-  - a = b = c = xxx
-
-pre-alpha-0.1 -> pre-alpha-0.2:
-  -  SET_LINENO filtered out in lexer now
-  -  added support for subscripts (just for Christian Tismer :-)
-  -  fixed bug with handling of BUILD_{LIST,TUPLE} & CALL_FUNCTION
-  -  dict-building support
-  -  comparison support
-  -  exec support
-  -  del support
-  -  pass support
-  -  slice support
-  -  no more extraneous (albeit legal) commas
-  -  finally, it excepts try [sic] but not all 42 variations of it

HISTORY.md

@@ -4,8 +4,7 @@ There have been a number of people who have worked on this. I am awed
 by the amount of work, number of people who have contributed to this,
 and the cleverness in the code.
 
-The below is an annotated history from talking to participants
-involved and my reading of the code and sources cited.
+The below is an annotated history from my reading of the sources cited.
 
 In 1998, John Aycock first wrote a grammar parser in Python,
 eventually called SPARK, that was usable inside a Python program. This
@@ -24,14 +23,10 @@ working on his thesis, John realized SPARK could be used to deparse
 Python bytecode. In the fall of 1999, he started writing the Python
 program, "decompyle", to do this.
 
-To help with control structure deparsing the instruction sequence was
-augmented with pseudo instruction COME_FROM. This code introduced
-another clever idea: using table-driven semantics routines, using
-format specifiers.
+This code introduced another clever idea: using table-driven
+semantics routines, using format specifiers.
 
-The last mention of a release of SPARK from John is around 2002. As
-released, although the Earley Algorithm parser was in good shape, this
-code was woefully lacking as serious Python deparser.
+The last mention of a release of SPARK from John is around 2002.
 
 In the fall of 2000, Hartmut Goebel
 [took over maintaining the code](https://groups.google.com/forum/#!searchin/comp.lang.python/hartmut$20goebel/comp.lang.python/35s3mp4-nuY/UZALti6ujnQJ). The
@@ -41,11 +36,10 @@ first subsequent public release announcement that I can find is
 From the CHANGES file found in
 [the tarball for that release](http://old-releases.ubuntu.com/ubuntu/pool/universe/d/decompyle2.2/decompyle2.2_2.2beta1.orig.tar.gz),
 it appears that Hartmut did most of the work to get this code to
-accept the full Python language. He added precedence to the table
+accept the full Python language. He added precidence to the table
 specifiers, support for multiple versions of Python, the
 pretty-printing of docstrings, lists, and hashes. He also wrote test and verification routines of
-deparsed bytecode, and used this in an extensive set of tests that he also wrote. He says he could verify against the 
-entire Python library. However I have subsequently found small and relatively obscure bugs in the decompilation code. 
+deparsed bytecode, and used this in an extensive set of tests that he also wrote. He could verify against the entire Python library.
 
 decompyle2.2 was packaged for Debian (sarge) by
 [Ben Burton around 2002](https://packages.qa.debian.org/d/decompyle.html). As
@@ -61,77 +55,32 @@ it doesn't look like he's done anything compiler-wise since SPARK). So
 I hope people will use the crazy-compilers service. I wish them the
 success that his good work deserves.
 
-Dan Pascu did a bit of work from late 2004 to early 2006 to get this
-code to handle first Python 2.3 and then 2.4 bytecodes. Because of
-jump optimization introduced in the CPython bytecode compiler at that
-time, various JUMP instructions were classifed as going backwards, and
-COME FROM instructions were reintroduced.  See
-[RELEASE-2.4-CHANGELOG.txt](https://github.com/rocky/python-uncompyle6/blob/master/DECOMPYLE-2.4-CHANGELOG.txt) 
-for more details here. There wasn't a public
-release of RELEASE-2.4 and bytecodes other than Python 2.4 weren't
-supported. Dan says the Python 2.3 version could verify the entire
-Python library. But given subsequent bugs found like simply
-recognizing complex-number constants in bytecode, decompilation wasn't perfect.
-
-Next we get to ["uncompyle" and
-PyPI](https://pypi.python.org/pypi/uncompyle/1.1) and the era of
-public version control. (Dan's code although not public used
-[darcs](http://darcs.net/) for version control.)
-
-In contrast to _decompyle_, _uncompyle_ at least in its final versions,
-runs only on Python 2.7. However it accepts bytecode back to Python
+Next we get to
+["uncompyle" and PyPI](https://pypi.python.org/pypi/uncompyle/1.1) and
+the era of git repositories. In contrast to decompyle, this now runs
+only on Python 2.7 although it accepts bytecode back to Python
 2.5. Thomas Grainger is the package owner of this, although Hartmut is
-still listed as the author.
+listed as the author.
 
 The project exists not only on
 [github](https://github.com/gstarnberger/uncompyle) but also on
-[bitbucket](https://bitbucket.org/gstarnberger/uncompyle) and later
-the defunct [google
-code](https://code.google.com/archive/p/unpyc/). The git/svn history
-goes back to 2009. Somewhere in there the name was changed from
-"decompyle" to "unpyc" by Keknehv, and then to "uncompyle" by Guenther Starnberger.
+[bitbucket](https://bitbucket.org/gstarnberger/uncompyle) where the
+git history goes back to 2009. Somewhere in there the name was changed
+from "decompyle" to "uncompyle".
 
 The name Thomas Grainger isn't found in (m)any of the commits in the
-several years of active development. First Keknehv worked on this up
-to Python 2.5 or so while acceping Python bytecode back to 2.0 or
-so. Then hamled made a few commits earler on, while Eike Siewertsen
-made a few commits later on. But mostly wibiti, and Guenther
-Starnberger got the code to where uncompyle2 was around 2012.
-
-In `uncompyle`, decompilation of python bytecode 2.5 & 2.6 is done by
-transforming the byte code into a a pseudo 2.7 python bytecode and is
-based on code from Eloi Vanderbeken.
-
-This project, `uncompyle6`, abandons that approach for various
-reasons. However the main reason is that we need offsets in fragment
-deparsing to be exactly the same, and the transformation process can
-remove instructions.  _Adding_ instructions with psuedo offsets is
-however okay.
-
-`Uncompyle6` however owes its existence to the fork of `uncompyle2` by
-Myst herie (Mysterie) whose first commit picks up at
-2012. I chose this since it seemed to have been at that time the most
-actively, if briefly, worked on. Also starting around 2012 is Dark
-Fenx's uncompyle3 which I used for inspiration for Python3 support.
-
-I started working on this late 2015, mostly to add fragment support.
-In that, I decided to make this runnable on Python 3.2+ and Python 2.6+
-while, handling Python bytecodes from Python versions 2.5+ and
-3.2+. In doing so, it has been expedient to separate this into three
-projects:
-
-* bytecode loading and disassembly ([xdis](https://pypi.python.org/pypi/xdis)),
-* parsing and tree building ([spark_parser](https://pypi.python.org/pypi/spark_parser)),
-* this project - grammar and semantic actions for decompiling
-  ([uncompyle6](https://pypi.python.org/pypi/spark_parser)).
+several years of active development. Guenther Starnberger, Keknehv,
+hamled, and Eike Siewertsen are principle committers here.
 
+This project, uncompyle6, however owes its existence to uncompyle2 by
+Myst herie (Mysterie) whose first commit seems to goes back to 2012;
+it is also based on Hartmut's code. I chose this as it seems had been
+the most actively worked on most recently.
 
 Over the many years, code styles and Python features have
 changed. However brilliant the code was and still is, it hasn't really
 had a single public active maintainer. And there have been many forks
-of the code.  I have spent a great deal of time trying to organize and
-modularize the code so that it can handle more Python versions more
-gracefully (with still only moderate success).
+of the code.
 
 That it has been in need of an overhaul has been recognized by the
 Hartmut a decade an a half ago:
@@ -141,26 +90,15 @@ Hartmut a decade an a half ago:
     NB. This is not a masterpiece of software, but became more like a hack.
     Probably a complete rewrite would be sensefull. hG/2000-12-27
 
-This project deparses using an Earley-algorithm parse with lots of
-massaging of tokens and the grammar in the scanner
-phase. Earley-algorithm parsers are context free and tend to be linear
-if the grammar is LR or left recursive.
-
-Another approach that doesn't use grammars is to do something like
-simulate execution symbolically and build expression trees off of
-stack results. Control flow in that apprproach still needs to be
-handled somewhat ad hoc.  The two important projects that work this
-way are [unpyc3](https://code.google.com/p/unpyc3/) and most
-especially [pycdc](https://github.com/zrax/pycdc) The latter project
-is largely by Michael Hansen and Darryl Pogue. If they supported
-getting source-code fragments, did a better job in supporting Python
-more fully, and had a way I could call it from Python, I'd probably
-would have ditched this and used that. The code runs blindingly fast
-and spans all versions of Python, although more recently Python 3
-support has been lagging.
+Lastly, I should mention [unpyc](https://code.google.com/p/unpyc3/)
+and most especially [pycdc](https://github.com/zrax/pycdc), largely by
+Michael Hansen and Darryl Pogue. If they supported getting source-code
+fragments and I could call it from Python, I'd probably ditch this and
+use that. From what I've seen, the code runs blindingly fast and spans
+all versions of Python.
 
 Tests for the project have been, or are being, culled from all of the
 projects mentioned.
 
-NB. If you find mistakes, want corrections, or want your name added
-(or removed), please contact me.
+NB. If you find mistakes, want corrections, or want your name added (or removed),
+please contact me.

HOW-TO-REPORT-A-BUG.md

@@ -1,68 +0,0 @@
-# How to report a Bug
-
-## The difficulty of the problem
-
-There is no Python decompiler yet, that I know about that will
-decompyle everything. This one probably does the
-best job of *any* Python decompiler. But it is a constant work in progress: Python keeps changing, and so does its code generation.
-
-I have found bugs in *every* Python decompiler I have tried. Even
-those where authors/maintainers claim that they have used it on
-the entire Python standard library. And I don't mean that
-the program doesn't come out with the same Python source instructions,
-but that the program is *semantically* not equivalent.
-
-So it is likely you'll find a mistranslation in decompiling.
-
-## What to send (minimum requirements)
-
-The basic requirement is pretty simple:
-
-* Python bytecode
-* Source text
-
-## What to send (additional helpful information)
-
-Some kind folks also give the invocation they used and the output
-which usually includes an error message produced. This is helpful. I
-can figure out what OS you are running this on and what version of
-*uncomplye6* was used. Therefore, if you don't provide the input
-command and the output from that, please give:
-
-* _uncompyle6_ version used
-* OS that you used this on
-* Python interpreter version used
-
-
-### But I don't *have* the source code!
-
-Sure, I get it. No problem. There is Python assembly code on parse
-errors, so simply by hand decompile that. To get a full disassembly,
-use pydisasm from the [xdis](https://pypi.python.org/pypi/xdis)
-package. Opcodes are described in the documentation for
-the [dis](https://docs.python.org/3.6/library/dis.html) module.
-
-### But I don't *have* the source code and am incapable of figuring how how to do a hand disassembly!
-
-Well, you could learn. No one is born into this world knowing how to
-disassemble Python bytecode. And as Richard Feynman once said, "What
-one fool can learn, so can another."
-
-## Narrowing the problem
-
-I don't need the entire source code base for which one file or module
-can't be decompiled. I just need that one file or module only. If
-there are several files, file a bug report for each file.
-
-Python modules can get quite large, and usually decompilation problems
-occur in a single function or maybe the main-line code but not any of
-the functions or classes. So please chop down the source code by
-removing those parts that do to decompile properly.
-
-By doing this, you'll probably have a better sense of what exactly is
-the problem. Perhaps you can find the boundary of what decompiles, and
-what doesn't. That is useful. Or maybe the same file will decompile
-properly on a neighboring version of Python. That is helpful too.
-
-In sum, the more you can isolate or narrow the problem, the more
-likley the problem will be fixed and fixed sooner.

LICENSE

@@ -1,6 +1,6 @@
-Copyright (c) 2015 by Rocky Bernstein
-Copyright (c) 2000 by hartmut Goebel <h.goebel@crazy-compilers.com>
 Copyright (c) 1998-2002 John Aycock
+Copyright (c) 2000 by hartmut Goebel <h.goebel@crazy-compilers.com>
+Copyright (c) 2015 by Rocky Bernstein
 
   Permission is hereby granted, free of charge, to any person obtaining
   a copy of this software and associated documentation files (the

MANIFEST.in

@@ -1,18 +1,9 @@
 include README.rst
-include ChangeLog
 include HISTORY.md
-include HOW-TO-REPORT-A-BUG.md
-include LICENSE
-include Makefile
-include requirements.txt
-include requirements-dev.txt
-include DECOMPYLE-2.4-CHANGELOG.txt
+include ChangeLog
 include __pkginfo__.py
 recursive-include uncompyle6 *.py
 include bin/uncompyle6
 include bin/pydisassemble
-include pytest/Makefile
-include test/Makefile
-recursive-include test *.py *.pyc
+recursive-include test *.py
 recursive-include pytest *.py
-recursive-include pytest/testdata *

Makefile

@@ -23,29 +23,16 @@ check:
 	@PYTHON_VERSION=`$(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2`; \
 	$(MAKE) check-$$PYTHON_VERSION
 
-# Run all quick tests
-check-short: pytest
-	$(MAKE) -C test check-short
-
 #: Tests for Python 2.7, 3.3 and 3.4
 check-2.7 check-3.3 check-3.4: pytest
 	$(MAKE) -C test $@
 
-#: Tests for Python 3.2 and 3.5 - pytest doesn't work here
-# Or rather 3.5 doesn't work not on Travis
-check-3.0 check-3.1 check-3.2 check-3.5 check-3.6:
+#: Tests for Python 3.5 - pytest doesn't work here
+check-3.5:
 	$(MAKE) -C test $@
 
 #:Tests for Python 2.6 (doesn't have pytest)
-check-2.4 check-2.5 check-2.6:
-	$(MAKE) -C test $@
-
-#:PyPy 2.6.1 or PyPy 5.0.1
-# Skip for now
-2.6 5.0 5.3:
-
-#:PyPy pypy3-2.4.0 Python 3:
-pypy-3.2 2.4:
+check-2.6:
 	$(MAKE) -C test $@
 
 #: Run py.test tests
@@ -57,7 +44,7 @@ clean: clean_pyc
 	$(PYTHON) ./setup.py $@
 	(cd test && $(MAKE) clean)
 
-#: Create source (tarball) and wheel distribution
+#: Create source (tarball) and binary (egg) distribution
 dist:
 	$(PYTHON) ./setup.py sdist bdist_egg
 
@@ -86,11 +73,6 @@ bdist_egg:
 	$(PYTHON) ./setup.py bdist_egg
 
 
-#: Create binary wheel distribution
-bdist_wheel:
-	$(PYTHON) ./setup.py bdist_wheel
-
-
 # It is too much work to figure out how to add a new command to distutils
 # to do the following. I'm sure distutils will someday get there.
 DISTCLEAN_FILES = build dist *.pyc

NEWS

@@ -1,325 +1,3 @@
-uncompyle6 2.11.1 2016-06-18 Fleetwood
-- Major improvements in fragment tracking
-  * Add nonterminal node in extractInfo
-  * tag more offsets in expressions
-  * tag array subscripts
-  * set YIELD value offset in a <yield> expr
-  * fix a long-standing bug in not adjusting final AST when melding other deparse ASTs
-- Fixes yet again for make_function node handling; document what's up here
-- Fix bug in snowflake Python 3.5 *args kwargs
-
-uncompyle6 2.10.1 2016-06-3 Marylin Frankel
-
-- fix some fragments parsing bugs
-  - was returning the wrong type sometimes in deparse_code_around_offset()
-  - capture function name in offsets
-  - track changes to ifelstrmtr node from pysource into fragments
-
-uncompyle6 2.10.0 2016-05-30 Elaine Gordon
-
-- Add fuzzy offset deparse lookup
-- 3.6 bugfixes
-   - fix EXTENDED_ARGS handling (and in 2.6 and others)
-   - semantic routine make_function fragments.py
-   - MAKE_FUNCTION handling
-   - CALL_FUNCTION_EX handling
-   - async property on defs
-   - support for CALL_FUNCTION_KW (moagstar)
-- 3.5+ UNMAP_PACK and BUILD_UNMAP_PACK handling
-- 3.5 FUNCTION_VAR bug
-- 3.x pass statement insdie while True
-- Improve 3.2 decompilation
-- Fixed -o argument processing (Gregrory)
-- Reduce scope of LOAD_ASSERT as expr to 3.4+
-- "await" statement fixes
-- 2.3, 2.4 "if 1 .." fixes
-- 3.x annotation fixes
-
-uncompyle6 2.9.11 2016-04-06
-
-- Better support for Python 3.5+ BUILD_MAP_UNPACK
-- Start 3.6 CALL_FUNCTION_EX support
-- Many decompilation bug fixes. (Many more remain). See ChangeLog
-
-uncompyle6 2.9.10 2016-02-25
-
-- Python grammar rule fixes
-- Add ability to get grammar coverage on runs
-- Handle Python 3.6 opcode BUILD_CONST_KEYMAP
-
-uncompyle6 2.9.9 2016-12-16
-
-- Remaining Python 3.5 ops handled
-  (this also means more Python 3.6 ops are handled)
-- Python 3.5 and 3.6 async and await handled
-- Python 3.0 decompilation improved
-- Python 3 annotations fixed
-- Better control-flow detection
-- Code cleanups and misc bug fixes
-
-uncompyle6 2.9.8 2016-12-16
-
-- Better control-flow detection
-- pseudo instruction THEN in 2.x
-  to disambiguate if from and
-- fix bug in --verify option
-- DRY (a little) control-flow detection
-- fix syntax in tuples with one element
-- if AST rule inheritence in Python 2.5
-- NAME_MODULE removal for Python <= 2.4
-- verifycall fixes for Python <= 2.4
-- more Python lint
-
-uncompyle6 2.9.7 2016-12-16
-
-- Start to handle 3.5/3.6 build_map_unpack_with_call
-- Some Python 3.6 bytecode to wordcode conversion fixes
-- option -g: show start-end range when possible
-- track print_docstring move to help (used in python 3.1)
-- verify: allow RETURN_VALUE to match RETURN_END_IF
-- some 3.2 compatibility
-- Better Python 3 control flow detection by adding Pseudo ELSE opcodes
-
-uncompyle6 2.9.6 2016-12-04
-
-- Shorten Python3 grammars with + and *
-  this requires spark parser 1.5.1
-- Add some AST reduction checks to improve
-  decompile accuracy. This too requires
-  spark parser 1.5.1
-
-uncompyle6 2.9.6 2016-11-20
-
-- Correct MANIFEST.in
-- More AST grammar checking
-- --linemapping option or linenumbers.line_number_mapping()
-  Shows correspondence of lines between source
-  and decompiled source
-- Some control flow adjustments in code for 2.x.
-  This is probably an improvement in 2.6 and before.
-  For 2.7 things are just shuffled around a little. Sigh.
-  Overall I think we are getting more precise in
-  or analysis even if it is not always reflected
-  in the results.
-- better control flow debugging output
-- Python 2 and 3 detect structure code is more similar
-- Handle Docstrings with embedded tiple quotes (""")
-
-uncompyle6 2.9.5 2016-11-13
-
-- Fix Python 3 bugs:
-  * improprer while 1 else
-  * docstring indent
-  * 3.3 default values in lambda expressions
-  * start 3.0 decompilation (needs newer xdis)
-- Start grammar misparse checking
-
-
-uncompyle6 2.9.4 2016-11-02
-
-- Handle Python 3.x function annotations
-- track def keywoard-parameter line-splitting in source code better
-- bump min xdis version to mask previous xdis bug
-
-uncompyle6 2.9.3 2016-10-26
-
-Release forced by incompatiblity change in xdis 3.2.0.
-
-- Python 3.1 bugs:
-  * handle "with ... as"
-  * handle "with"
-  * Start handling def (...) -> yy (has bugs still)
-
-- DRY Python 3.x via inheritance
-- Python 3.6 work (from Daniel Bradburn)
-  * Handle 3.6 buildstring
-  * Handle 3.6 handle single and multiple fstring better
-
-
-uncompyle6 2.9.2 2016-10-15
-
-- use source-code line breaks to assist in where to break
-  in tuples and maps
-- Fix Python 1.5 decompyle bugs
-- Fix some Python 2.6 and below bugs
-- DRY fragments.py code a little
-
-uncompyle6 2.9.1 2016-10-09
-
-- Improved Python 1.5 decompiling
-- Handle old-style pre Python 2.2 classes
-
-uncompyle6 2.9.0 2016-10-09
-
-- Use xdis 3.0.0 protocol load_module.
-  this Forces change in requirements.txt and _pkg_info_.py
-- Start Python 1.5 decompiling; another round of work is needed to
-  remove bugs
-- Simpify python 2.1 grammar
-- Fix bug with -t ...  Wasn't showing source text when -t option was given
-- Fix 2.1-2.6 bug in list comprehension
-
-uncompyle6 2.8.4 2016-10-08
-
-- Python 3 disassembly bug fixes
-- Python 3.6 fstring bug fixes (from moagstar)
-- Python 2.1 disassembly
-- COME_FROM suffixes added in Python3
-- use .py extension in verification disassembly
-
-uncompyle6 2.8.3 2016-09-11 live from NYC!
-
-NOTE: this is possibly the last release before a major reworking of
-control-flow structure detection is done.
-
-- Lots of bug fixes in decompilation:
-  * 3.0 .. 3.4 whileTrue bug
-  * 3.x function declaration deparsing:
-    . 3.0 .. 3.2 *args processing
-    . 3.0 .. 3.2 call name and kwargs bug
-    . 3.0 .. getting parameter of *
-    . 3.0 .. handling varible number of args
-    . 3.0 .. "if" structure bugs
-  * 3.5+ if/else bugs
-  * 2.2-2.6 bugs
-    . try/except control flow
-    . a == b == c -like detection
-    . generator detection
-    . "while .. and" statement bugs
-    . handle "except <cond>, <var>"
-    . use older raise format in 2.x
-- scanner "disassemble" is now "ingest". True disassembly is done by xdis
-- Start accepting Python 3.1 bytecode
-- Add --weak-verify option on test_pyenvlib and test_pythonlib. This
-  catches more bugs more easily
-- bump xdis requirement so we can deparse dropbox 2.5 code
-- Added H. Goebel's changes before 2.4 in DECOMPYLE-2.4-CHANGELOG.txt
-
-uncompyle6 2.8.2 2016-08-29
-
-- Handle Python 3.6 format string conversions !r, !s, !a
-- Start to handle 3.1 bytecode
-- Fix some PyPy translation bugs
-- We now only handle 3.6.0a3+ since that is incompatible with 3.6 before that
-
-uncompyle6 2.8.1 2016-08-20
-
-- Add Python 2.2 decompilation
-
-- Fix bugs
- * PyPy LOOKUP_METHOD bug
- * Python 3.6 FORMAT_VALUE handles expressions now
-
-uncompyle6 2.8.0 2016-08-03
-
-- Start Python 3.6 support (moagstar)
-  more work on PEP 498 needed
-- tidy bytecode/word output
-- numerous decompiling bugs fixed
-- grammar testing started
-- show magic number in deparsed output
-- better grammar and semantic action segregation based
-  on python bytecode version
-
-uncompyle6 2.7.1 2016-07-26
-
-- PyPy bytecodes for 2.7 and 3.2 added
-- Instruction formatting improved slightly
-- 2.7 bytecode "continue" bug fixed
-
-uncompyle6 2.7.0 2016-07-15
-
-- Many Syntax and verifification bugs removed
-  tested on standard libraries from 2.3.7 to 3.5.1
-  and they all decompile and verify fine.
-  I'm sure there are more bugs though.
-
-uncompyle6 2.6.2 2016-07-11 Manhattenhenge
-
-- Extend bytecodes back to 2.3
-- Fix bugs:
-  * 3.x and 2.7 set comprehensions,
-  * while1 loops
-  * continue statements
-- DRY and segregate grammar more
-
-uncompyle6 2.6.1 2016-07-08
-
-- Go over Python 2.5 bytecode deparsing
-  all library programs now deparse
-- Fix a couple bugs in 2.6 deparsing
-
-uncompyle6 2.6.0 2016-07-07
-
-- Improve Python 2.6 bytecode deparsing:
-  stdlib now will deparse something
-- Better <2.6 vs. 2.7 grammar separation
-- Fix some 2.7 deparsing bugs
-- Fix bug in installing uncompyle6 script
-- Doc improvments
-
-uncompyle6 2.5.0 2016-06-22  Summer Solstace
-
-- Much better Python 3.2-3.5 coverage.
-  3.4.6 is probably the best;3.2 and 3.5 are weaker
-- Better AST printing with -t
-- Better error reporting
-- Better fragment offset tracking
-- Some (much-needed) code refactoring
-
-uncompyle6 2.4.0 2016-05-18 (in memory of Lewis Bernstein)
-
-- Many Python 3 bugs fixed:
-  * Python 3.2 to 3.5 libaries largely
-    uncompyle and most verify
-- pydisassembler:
-  * disassembles all code objects in a file
-  * can select showing bytecode before
-    or after uncompyle mangling, option -U
-- DRY scanner code (but more is desired)
-- Some code cleanup (but more is desired)
-- Misc Bugs fixed:
-  * handle complex number unmarshaling
-  * Running on Python 2 to works on Python 3.5 bytecodes now
-
-uncompyle6 2.3.5 and 2.3.6 2016-05-14
-
-- Python 2 class decorator fix (thanks to Tey)
-- Fix fragment parsing bugs
-- Fix some Python 3 parsing bugs:
-  * Handling single in * parameter
-  * "while True"
-  * escape from for inside if
-  * yield expressions
-- Correct history based on info from Dan Pascu
-- Fix up pip packaging, ugh.
-
-uncompyle6 2.3.4 2016-05-5
-
-- More Python 3.5 parsing bugs addressed
-- decompiling Python 3.5 from other Python versions works
-- test from Python 3.2
-- remove "__module__ = __name__" in 3.0 <= Python 3.2
-
-uncompyle6 2.3.3 2016-05-3
-
-- Fix bug in running uncompyle6 script on Python 3
-- Speed up performance on deparsing long lists by grouping in chunks of 32 and 256 items
-- DRY Python expressions between Python 2 and 3
-
-uncompyle6 2.3.2 2016-05-1
-
-- Add --version option standalone scripts
-- Correct License information in package
-- expose fns uncompyle_file, load_file, and load_module
-- Start to DRY Python2 and Python3 grammars Separate out 3.2, and 3.5+
-  specific grammar code
-- Fix bug in 3.5+ constant map parsing
-
-uncompyle6 2.3.0, 2.3.1 2016-04-30
-
-- Require spark_parser  >= 1.1.0
-
 uncompyle6 2.2.0 2016-04-30
 
 - Spark is no longer here but pulled separate package spark_parse

PKG-INFO

@@ -5,6 +5,6 @@ Summary: Python byte-code to source-code converter
 Home-page: http://github.com/rocky/python-uncompyle6
 Author: Rocky
 Author-email: rb@dustyfeet.com
-License: MIT
+License: GPLv3
 Description: UNKNOWN
 Platform: UNKNOWN

README.rst

@@ -1,31 +1,24 @@
-|buildstatus| |Supported Python Versions|
+|buildstatus|
 
 uncompyle6
 ==========
 
-A native Python cross-version Decompiler and Fragment Decompiler.
-Follows in the tradition of decompyle, uncompyle, and uncompyle2.
+A native Python bytecode Disassembler, Decompiler, Fragment Decompiler
+and bytecode library
 
 
 Introduction
 ------------
 
 *uncompyle6* translates Python bytecode back into equivalent Python
-source code. It accepts bytecodes from Python version 1.5, and 2.1 to
-3.6 or so, including PyPy bytecode and Dropbox's Python 2.5 bytecode.
+source code. It accepts bytecodes from Python version 2.5 to 3.4 or
+so and has been tested on Python running versions 2.6, 2.7, 3.3,
+3.4 and 3.5.
 
 Why this?
 ---------
 
-There were a number of decompyle, uncompile, uncompyle2, uncompyle3
-forks around. All of them came basically from the same code base, and
-almost all of them no were no longer actively maintained. Only one
-handled Python 3, and even there, only 3.2 or 3.3 depending on which
-code is used. This code pulls these together and moves forward. This
-project has the most complete support for Python 3.3 and above. It
-also addresses a number of open issues in the previous forks.
-
-What makes this different from other CPython bytecode decompilers?: its
+What makes this different from other CPython bytecode decompilers?  Its
 ability to deparse just fragments and give source-code information
 around a given bytecode offset.
 
@@ -41,13 +34,12 @@ location in more detail than just a line number.  It can be also used
 when source-code information does not exist and there is just bytecode
 information.
 
-Requirements
-------------
+Other parts of the library can be used inside Python for various
+bytecode-related tasks. For example you can read in bytecode,
+i.e. perform a version-independent `marshal.loads()`, and disassemble
+the bytecode using a version of Python different from the one used to
+compile the bytecode.
 
-This project requires Python 2.6 or later, PyPy 3-2.4, or PyPy-5.0.1.
-Python versions 2.4-2.7 are supported in the python-2.4 branch.
-The bytecode files it can read has been tested on Python bytecodes from
-versions 1.5, 2.1-2.7, and 3.0-3.6 and the above-mentioned PyPy versions.
 
 Installation
 ------------
@@ -56,13 +48,13 @@ This uses setup.py, so it follows the standard Python routine:
 
 ::
 
-    pip install -e .
+    pip install -r requirements.txt
     pip install -r requirements-dev.txt
     python setup.py install # may need sudo
     # or if you have pyenv:
     python setup.py develop
 
-A GNU makefile is also provided so :code:`make install` (possibly as root or
+A GNU makefile is also provided so `make install` (possibly as root or
 sudo) will do the steps above.
 
 Testing
@@ -76,7 +68,7 @@ A GNU makefile has been added to smooth over setting running the right
 command, and running tests from fastest to slowest.
 
 If you have remake_ installed, you can see the list of all tasks
-including tests via :code:`remake --tasks`
+including tests via `remake --tasks`
 
 
 Usage
@@ -86,102 +78,31 @@ Run
 
 ::
 
-$ uncompyle6 *compiled-python-file-pyc-or-pyo*
+     ./bin/uncompyle6 -h
+     ./bin/pydisassemble -h
 
-For usage help:
-
-::
-
-   $ uncompyle6 -h
-
-If you want strong verification of the correctness of the
-decompilation process, add the `--verify` option. But there are
-situations where this will indicate a failure, although the generated
-program is semantically equivalent. Using option `--weak-verify` will
-tell you if there is something definitely wrong. Generally, large
-swaths of code are decompiled correctly, if not the entire program.
-
-You can also cross compare the results with pycdc_ . Since they work
-differently, bugs here often aren't in that, and vice versa.
+for usage help
 
 
 Known Bugs/Restrictions
 -----------------------
 
-The biggest known and possibly fixable (but hard) problem has to do
-with handling control flow. All of the Python decompilers I have looked
-at have the same problem. In some cases we can detect an erroneous
-decompilation and report that.
-
-Over 98% of the decompilation of Python standard library packages in
-Python 2.7.12 verifies correctly. Over 99% of Python 2.7 and 3.3-3.5
-"weakly" verify. Python 2.6 drops down to 96% weakly verifying.
-Other versions drop off in quality too.
-
-*Verification* is the process of decompiling bytecode, compiling with
-a Python for that bytecode version, and then comparing the bytecode
-produced by the decompiled/compiled program. Some allowance is made
-for inessential differences. But other semantically equivalent
-differences are not caught. For example ``1 and 0`` is decompiled to
-the equivalent ``0``; remnants of the first true evaluation (1) is
-lost when Python compiles this. When Python next compiles ``0`` the
-resulting code is simpler.
-
-*Weak Verification*
-on the other hand doesn't check bytecode for equivalence but does
-check to see if the resulting decompiled source is a valid Python
-program by running the Python interpreter. Because the Python language
-has changed so much, for best results you should use the same Python
-Version in checking as used in the bytecode.
-
-Later distributions average about 200 files. There is some work to do
-on the lower end Python versions which is more difficult for us to
-handle since we don't have a Python interpreter for versions 1.5, 1.6,
-and 2.0.
-
-In the Python 3 series, Python support is is strongest around 3.4 or
-3.3 and drops off as you move further away from those versions. Python
-3.6 changes things drastically by using word codes rather than byte
-codes. That has been addressed, but then it also changes function call
-opcodes and its semantics and has more problems with control flow than
-3.5 has.
-
-Currently not all Python magic numbers are supported. Specifically in
-some versions of Python, notably Python 3.6, the magic number has
-changes several times within a version. We support only the released
-magic. There are also customized Python interpreters, notably Dropbox,
-which use their own magic and encrypt bytcode. With the exception of
-the Dropbox's old Python 2.5 interpreter this kind of thing is not
-handled.
-
-We also don't handle PJOrion_ obfuscated code. For that try: PJOrion
-Deobfuscator_ to unscramble the bytecode to get valid bytecode before
-trying this tool.
-
-Handling pathologically long lists of expressions or statements is
-slow.
-
-
-There is lots to do, so please dig in and help.
+Python 2 deparsing is probably as solid as the various versions of
+uncompyle2.  Python 3 deparsing is okay but not as solid.
 
 See Also
 --------
 
-* https://github.com/zrax/pycdc : supports all versions of Python and is written in C++. Support for later Python 3 versions is a bit lacking though.
-* https://code.google.com/archive/p/unpyc3/ : supports Python 3.2 only. The above projects use a different decompiling technique than what is used here.
-* https://github.com/figment/unpyc3/ : fork of above, but supports Python 3.3 only. Include some fixes like supporting function annotations
-* The HISTORY_ file.
-* `How to report a bug <https://github.com/rocky/python-uncompyle6/blob/master/HISTORY.md>`_
+* https://github.com/zrax/pycdc
+* https://code.google.com/p/unpyc3/
+
+The HISTORY file.
+
 .. |downloads| image:: https://img.shields.io/pypi/dd/uncompyle6.svg
 .. _trepan: https://pypi.python.org/pypi/trepan
-.. _HISTORY: https://github.com/rocky/python-uncompyle6/blob/master/HISTORY.md
 .. _debuggers: https://pypi.python.org/pypi/trepan3k
 .. _remake: https://bashdb.sf.net/remake
 .. _pycdc: https://github.com/zrax/pycdc
 .. _this: https://github.com/rocky/python-uncompyle6/wiki/Deparsing-technology-and-its-use-in-exact-location-reporting
 .. |buildstatus| image:: https://travis-ci.org/rocky/python-uncompyle6.svg
 		 :target: https://travis-ci.org/rocky/python-uncompyle6
-.. |Supported Python Versions| image:: https://img.shields.io/pypi/pyversions/uncompyle6.svg
-   :target: https://pypi.python.org/pypi/uncompyle6/
-.. _PJOrion: http://www.koreanrandom.com/forum/topic/15280-pjorion-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5-%D0%BA%D0%BE%D0%BC%D0%BF%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F-%D0%B4%D0%B5%D0%BA%D0%BE%D0%BC%D0%BF%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F-%D0%BE%D0%B1%D1%84
-.. _Deobfuscator: https://github.com/extremecoders-re/PjOrion-Deobfuscator

__pkginfo__.py

@@ -9,23 +9,20 @@
 
 # Things that change more often go here.
 copyright   = """
-Copyright (C) 2015-2017 Rocky Bernstein <rb@dustyfeet.com>.
+Copyright (C) 2015 Rocky Bernstein <rb@dustyfeet.com>.
 """
 
-classifiers =  ['Development Status :: 5 - Production/Stable',
+classifiers =  ['Development Status :: 3 - Alpha',
                 'Intended Audience :: Developers',
                 'Operating System :: OS Independent',
                 'Programming Language :: Python',
-                'Programming Language :: Python :: 2.4',
-                'Programming Language :: Python :: 2.5',
+                'Programming Language :: Python :: 2',
                 'Programming Language :: Python :: 2.6',
                 'Programming Language :: Python :: 2.7',
-                'Programming Language :: Python :: 3.1',
-                'Programming Language :: Python :: 3.2',
+                'Programming Language :: Python :: 3',
                 'Programming Language :: Python :: 3.3',
                 'Programming Language :: Python :: 3.4',
                 'Programming Language :: Python :: 3.5',
-                'Programming Language :: Python :: 3.6',
                 'Topic :: Software Development :: Debuggers',
                 'Topic :: Software Development :: Libraries :: Python Modules',
                 ]
@@ -33,35 +30,31 @@ classifiers =  ['Development Status :: 5 - Production/Stable',
 # The rest in alphabetic order
 author             = "Rocky Bernstein, Hartmut Goebel, John Aycock, and others"
 author_email       = "rb@dustyfeet.com"
-entry_points       = {
-    'console_scripts': [
-        'uncompyle6=uncompyle6.bin.uncompile:main_bin',
-        'pydisassemble=uncompyle6.bin.pydisassemble:main',
-    ]}
 ftp_url            = None
-install_requires   = ['spark-parser >= 1.6.1, < 1.7.0',
-                      'xdis >= 3.3.1, < 3.4.0']
-license            = 'MIT'
+# license            = 'BSDish'
 mailing_list       = 'python-debugger@googlegroups.com'
 modname            = 'uncompyle6'
+packages           = ['uncompyle6', 'uncompyle6.opcodes', 'uncompyle6.semantics', 'uncompyle6.scanners', 'uncompyle6.parsers']
 py_modules         = None
-short_desc         = 'Python cross-version byte-code deparser'
+short_desc         = 'Python byte-code disassembler and source-code converter'
+scripts            = ['bin/uncompyle6', 'bin/pydisassemble']
+
+import os.path
+
+
+def get_srcdir():
+    filename = os.path.normcase(os.path.dirname(os.path.abspath(__file__)))
+    return os.path.realpath(filename)
+
+ns = {}
+version            = '2.3.0'
 web                = 'https://github.com/rocky/python-uncompyle6/'
 
 # tracebacks in zip files are funky and not debuggable
 zip_safe = True
 
 
-import os.path
-def get_srcdir():
-    filename = os.path.normcase(os.path.dirname(os.path.abspath(__file__)))
-    return os.path.realpath(filename)
-
-srcdir = get_srcdir()
-
 def read(*rnames):
-    return open(os.path.join(srcdir, *rnames)).read()
+    return open(os.path.join(os.path.dirname(__file__), *rnames)).read()
 
-# Get info from files; set: long_description and VERSION
 long_description   = ( read("README.rst") + '\n' )
-exec(read('uncompyle6/version.py'))

appveyor.yml

@@ -1,78 +0,0 @@
-environment:
-  global:
-    # SDK v7.0 MSVC Express 2008's SetEnv.cmd script will fail if the
-    # /E:ON and /V:ON options are not enabled in the batch script intepreter
-    # See: http://stackoverflow.com/a/13751649/163740
-    CMD_IN_ENV: "cmd /E:ON /V:ON /C .\\appveyor\\run_with_env.cmd"
-
-  matrix:
-
-    # Pre-installed Python versions, which Appveyor may upgrade to
-    # a later point release.
-    # See: http://www.appveyor.com/docs/installed-software#python
-
-    # - PYTHON: "C:\\Python27"
-    #   PYTHON_VERSION: "2.7.x"
-    #   PYTHON_ARCH: "32"
-
-    - PYTHON: "C:\\Python27-x64"
-      PYTHON_VERSION: "2.7.x"
-      PYTHON_ARCH: "64"
-
-    # - PYTHON: "C:\\Python26"
-    #   PYTHON_VERSION: "2.6.x"
-    #   PYTHON_ARCH: "32"
-
-    # - PYTHON: "C:\\Python26-x64"
-    #   PYTHON_VERSION: "2.6.x"
-    #   PYTHON_ARCH: "64"
-
-install:
-  # We need wheel installed to build wheels
-  - "%PYTHON%\\python.exe -m pip install wheel"
-
-  # Install Python (from the official .msi of http://python.org) and pip when
-  # not already installed.
-  - ps: if (-not(Test-Path($env:PYTHON))) { & appveyor\install.ps1 }
-
-  # Prepend newly installed Python to the PATH of this build (this cannot be
-  # done from inside the powershell script as it would require to restart
-  # the parent CMD process).
-  - "SET PATH=%PYTHON%;%PYTHON%\\Scripts;%PATH%"
-  - "SET HOME=."
-
-  # Check that we have the expected version and architecture for Python
-  - "python --version"
-  - "python -c \"import struct; print(struct.calcsize('P') * 8)\""
-
-  # Upgrade to the latest version of pip to avoid it displaying warnings
-  # about it being out of date.
-  - "pip install --disable-pip-version-check --user --upgrade pip"
-
-  # Install the build dependencies of the project. If some dependencies contain
-  # compiled extensions and are not provided as pre-built wheel packages,
-  # pip will build them from source using the MSVC compiler matching the
-  # target Python version and architecture
-  - "%CMD_IN_ENV% pip install -r requirements.txt"
-
-build_script:
-  # Build the compiled extension
-  - "%CMD_IN_ENV% python setup.py build"
-
-test_script:
-  # Run the project tests
-  - "%CMD_IN_ENV% python test/test_pyenvlib.py --native --weak-verify"
-
-after_test:
-  # If tests are successful, create binary packages for the project.
-  - "%CMD_IN_ENV% python setup.py bdist_wininst"
-  - "%CMD_IN_ENV% python setup.py bdist_msi"
-  - ps: "ls dist"
-
-artifacts:
-  # Archive the generated packages in the ci.appveyor.com build report.
-  - path: dist\*
-
-#on_success:
-#  - TODO: upload the content of dist/*.whl to a public wheelhouse
-#

appveyor/install.ps1

@@ -1,229 +0,0 @@
-# Sample script to install Python and pip under Windows
-# Authors: Olivier Grisel, Jonathan Helmus, Kyle Kastner, and Alex Willmer
-# License: CC0 1.0 Universal: http://creativecommons.org/publicdomain/zero/1.0/
-
-$MINICONDA_URL = "http://repo.continuum.io/miniconda/"
-$BASE_URL = "https://www.python.org/ftp/python/"
-$GET_PIP_URL = "https://bootstrap.pypa.io/get-pip.py"
-$GET_PIP_PATH = "C:\get-pip.py"
-
-$PYTHON_PRERELEASE_REGEX = @"
-(?x)
-(?<major>\d+)
-\.
-(?<minor>\d+)
-\.
-(?<micro>\d+)
-(?<prerelease>[a-z]{1,2}\d+)
-"@
-
-
-function Download ($filename, $url) {
-    $webclient = New-Object System.Net.WebClient
-
-    $basedir = $pwd.Path + "\"
-    $filepath = $basedir + $filename
-    if (Test-Path $filename) {
-        Write-Host "Reusing" $filepath
-        return $filepath
-    }
-
-    # Download and retry up to 3 times in case of network transient errors.
-    Write-Host "Downloading" $filename "from" $url
-    $retry_attempts = 2
-    for ($i = 0; $i -lt $retry_attempts; $i++) {
-        try {
-            $webclient.DownloadFile($url, $filepath)
-            break
-        }
-        Catch [Exception]{
-            Start-Sleep 1
-        }
-    }
-    if (Test-Path $filepath) {
-        Write-Host "File saved at" $filepath
-    } else {
-        # Retry once to get the error message if any at the last try
-        $webclient.DownloadFile($url, $filepath)
-    }
-    return $filepath
-}
-
-
-function ParsePythonVersion ($python_version) {
-    if ($python_version -match $PYTHON_PRERELEASE_REGEX) {
-        return ([int]$matches.major, [int]$matches.minor, [int]$matches.micro,
-                $matches.prerelease)
-    }
-    $version_obj = [version]$python_version
-    return ($version_obj.major, $version_obj.minor, $version_obj.build, "")
-}
-
-
-function DownloadPython ($python_version, $platform_suffix) {
-    $major, $minor, $micro, $prerelease = ParsePythonVersion $python_version
-
-    if (($major -le 2 -and $micro -eq 0) `
-        -or ($major -eq 3 -and $minor -le 2 -and $micro -eq 0) `
-        ) {
-        $dir = "$major.$minor"
-        $python_version = "$major.$minor$prerelease"
-    } else {
-        $dir = "$major.$minor.$micro"
-    }
-
-    if ($prerelease) {
-        if (($major -le 2) `
-            -or ($major -eq 3 -and $minor -eq 1) `
-            -or ($major -eq 3 -and $minor -eq 2) `
-            -or ($major -eq 3 -and $minor -eq 3) `
-            ) {
-            $dir = "$dir/prev"
-        }
-    }
-
-    if (($major -le 2) -or ($major -le 3 -and $minor -le 4)) {
-        $ext = "msi"
-        if ($platform_suffix) {
-            $platform_suffix = ".$platform_suffix"
-        }
-    } else {
-        $ext = "exe"
-        if ($platform_suffix) {
-            $platform_suffix = "-$platform_suffix"
-        }
-    }
-
-    $filename = "python-$python_version$platform_suffix.$ext"
-    $url = "$BASE_URL$dir/$filename"
-    $filepath = Download $filename $url
-    return $filepath
-}
-
-
-function InstallPython ($python_version, $architecture, $python_home) {
-    Write-Host "Installing Python" $python_version "for" $architecture "bit architecture to" $python_home
-    if (Test-Path $python_home) {
-        Write-Host $python_home "already exists, skipping."
-        return $false
-    }
-    if ($architecture -eq "32") {
-        $platform_suffix = ""
-    } else {
-        $platform_suffix = "amd64"
-    }
-    $installer_path = DownloadPython $python_version $platform_suffix
-    $installer_ext = [System.IO.Path]::GetExtension($installer_path)
-    Write-Host "Installing $installer_path to $python_home"
-    $install_log = $python_home + ".log"
-    if ($installer_ext -eq '.msi') {
-        InstallPythonMSI $installer_path $python_home $install_log
-    } else {
-        InstallPythonEXE $installer_path $python_home $install_log
-    }
-    if (Test-Path $python_home) {
-        Write-Host "Python $python_version ($architecture) installation complete"
-    } else {
-        Write-Host "Failed to install Python in $python_home"
-        Get-Content -Path $install_log
-        Exit 1
-    }
-}
-
-
-function InstallPythonEXE ($exepath, $python_home, $install_log) {
-    $install_args = "/quiet InstallAllUsers=1 TargetDir=$python_home"
-    RunCommand $exepath $install_args
-}
-
-
-function InstallPythonMSI ($msipath, $python_home, $install_log) {
-    $install_args = "/qn /log $install_log /i $msipath TARGETDIR=$python_home"
-    $uninstall_args = "/qn /x $msipath"
-    RunCommand "msiexec.exe" $install_args
-    if (-not(Test-Path $python_home)) {
-        Write-Host "Python seems to be installed else-where, reinstalling."
-        RunCommand "msiexec.exe" $uninstall_args
-        RunCommand "msiexec.exe" $install_args
-    }
-}
-
-function RunCommand ($command, $command_args) {
-    Write-Host $command $command_args
-    Start-Process -FilePath $command -ArgumentList $command_args -Wait -Passthru
-}
-
-
-function InstallPip ($python_home) {
-    $pip_path = $python_home + "\Scripts\pip.exe"
-    $python_path = $python_home + "\python.exe"
-    if (-not(Test-Path $pip_path)) {
-        Write-Host "Installing pip..."
-        $webclient = New-Object System.Net.WebClient
-        $webclient.DownloadFile($GET_PIP_URL, $GET_PIP_PATH)
-        Write-Host "Executing:" $python_path $GET_PIP_PATH
-        & $python_path $GET_PIP_PATH
-    } else {
-        Write-Host "pip already installed."
-    }
-}
-
-
-function DownloadMiniconda ($python_version, $platform_suffix) {
-    if ($python_version -eq "3.4") {
-        $filename = "Miniconda3-3.5.5-Windows-" + $platform_suffix + ".exe"
-    } else {
-        $filename = "Miniconda-3.5.5-Windows-" + $platform_suffix + ".exe"
-    }
-    $url = $MINICONDA_URL + $filename
-    $filepath = Download $filename $url
-    return $filepath
-}
-
-
-function InstallMiniconda ($python_version, $architecture, $python_home) {
-    Write-Host "Installing Python" $python_version "for" $architecture "bit architecture to" $python_home
-    if (Test-Path $python_home) {
-        Write-Host $python_home "already exists, skipping."
-        return $false
-    }
-    if ($architecture -eq "32") {
-        $platform_suffix = "x86"
-    } else {
-        $platform_suffix = "x86_64"
-    }
-    $filepath = DownloadMiniconda $python_version $platform_suffix
-    Write-Host "Installing" $filepath "to" $python_home
-    $install_log = $python_home + ".log"
-    $args = "/S /D=$python_home"
-    Write-Host $filepath $args
-    Start-Process -FilePath $filepath -ArgumentList $args -Wait -Passthru
-    if (Test-Path $python_home) {
-        Write-Host "Python $python_version ($architecture) installation complete"
-    } else {
-        Write-Host "Failed to install Python in $python_home"
-        Get-Content -Path $install_log
-        Exit 1
-    }
-}
-
-
-function InstallMinicondaPip ($python_home) {
-    $pip_path = $python_home + "\Scripts\pip.exe"
-    $conda_path = $python_home + "\Scripts\conda.exe"
-    if (-not(Test-Path $pip_path)) {
-        Write-Host "Installing pip..."
-        $args = "install --yes pip"
-        Write-Host $conda_path $args
-        Start-Process -FilePath "$conda_path" -ArgumentList $args -Wait -Passthru
-    } else {
-        Write-Host "pip already installed."
-    }
-}
-
-function main () {
-    InstallPython $env:PYTHON_VERSION $env:PYTHON_ARCH $env:PYTHON
-    InstallPip $env:PYTHON
-}
-
-main

appveyor/run_with_env.cmd

@@ -1,87 +0,0 @@
-:: To build extensions for 64 bit Python 3, we need to configure environment
-:: variables to use the MSVC 2010 C++ compilers from GRMSDKX_EN_DVD.iso of:
-:: MS Windows SDK for Windows 7 and .NET Framework 4 (SDK v7.1)
-::
-:: To build extensions for 64 bit Python 2, we need to configure environment
-:: variables to use the MSVC 2008 C++ compilers from GRMSDKX_EN_DVD.iso of:
-:: MS Windows SDK for Windows 7 and .NET Framework 3.5 (SDK v7.0)
-::
-:: 32 bit builds, and 64-bit builds for 3.5 and beyond, do not require specific
-:: environment configurations.
-::
-:: Note: this script needs to be run with the /E:ON and /V:ON flags for the
-:: cmd interpreter, at least for (SDK v7.0)
-::
-:: More details at:
-:: https://github.com/cython/cython/wiki/64BitCythonExtensionsOnWindows
-:: http://stackoverflow.com/a/13751649/163740
-::
-:: Author: Olivier Grisel
-:: License: CC0 1.0 Universal: http://creativecommons.org/publicdomain/zero/1.0/
-::
-:: Notes about batch files for Python people:
-::
-:: Quotes in values are literally part of the values:
-::      SET FOO="bar"
-:: FOO is now five characters long: " b a r "
-:: If you don't want quotes, don't include them on the right-hand side.
-::
-:: The CALL lines at the end of this file look redundant, but if you move them
-:: outside of the IF clauses, they do not run properly in the SET_SDK_64==Y
-:: case, I don't know why.
-@ECHO OFF
-SET COMMAND_TO_RUN=%*
-SET WIN_SDK_ROOT=C:\Program Files\Microsoft SDKs\Windows
-SET WIN_WDK=c:\Program Files (x86)\Windows Kits\10\Include\wdf
-
-:: Extract the major and minor versions, and allow for the minor version to be
-:: more than 9.  This requires the version number to have two dots in it.
-SET MAJOR_PYTHON_VERSION=%PYTHON_VERSION:~0,1%
-IF "%PYTHON_VERSION:~3,1%" == "." (
-    SET MINOR_PYTHON_VERSION=%PYTHON_VERSION:~2,1%
-) ELSE (
-    SET MINOR_PYTHON_VERSION=%PYTHON_VERSION:~2,2%
-)
-
-:: Based on the Python version, determine what SDK version to use, and whether
-:: to set the SDK for 64-bit.
-IF %MAJOR_PYTHON_VERSION% == 2 (
-    SET WINDOWS_SDK_VERSION="v7.0"
-    SET SET_SDK_64=Y
-) ELSE (
-    IF %MAJOR_PYTHON_VERSION% == 3 (
-        SET WINDOWS_SDK_VERSION="v7.1"
-        IF %MINOR_PYTHON_VERSION% LEQ 4 (
-            SET SET_SDK_64=Y
-        ) ELSE (
-            SET SET_SDK_64=N
-            IF EXIST "%WIN_WDK%" (
-                :: See: https://connect.microsoft.com/VisualStudio/feedback/details/1610302/
-                REN "%WIN_WDK%" 0wdf
-            )
-        )
-    ) ELSE (
-        ECHO Unsupported Python version: "%MAJOR_PYTHON_VERSION%"
-        EXIT 1
-    )
-)
-
-IF %PYTHON_ARCH% == 64 (
-    IF %SET_SDK_64% == Y (
-        ECHO Configuring Windows SDK %WINDOWS_SDK_VERSION% for Python %MAJOR_PYTHON_VERSION% on a 64 bit architecture
-        SET DISTUTILS_USE_SDK=1
-        SET MSSdk=1
-        "%WIN_SDK_ROOT%\%WINDOWS_SDK_VERSION%\Setup\WindowsSdkVer.exe" -q -version:%WINDOWS_SDK_VERSION%
-        "%WIN_SDK_ROOT%\%WINDOWS_SDK_VERSION%\Bin\SetEnv.cmd" /x64 /release
-        ECHO Executing: %COMMAND_TO_RUN%
-        call %COMMAND_TO_RUN% || EXIT 1
-    ) ELSE (
-        ECHO Using default MSVC build environment for 64 bit architecture
-        ECHO Executing: %COMMAND_TO_RUN%
-        call %COMMAND_TO_RUN% || EXIT 1
-    )
-) ELSE (
-    ECHO Using default MSVC build environment for 32 bit architecture
-    ECHO Executing: %COMMAND_TO_RUN%
-    call %COMMAND_TO_RUN% || EXIT 1
-)

bin/pydisassemble

@@ -1,3 +1,77 @@
 #!/usr/bin/env python
-from uncompyle6.bin.pydisassemble import main
-main()
+# Mode: -*- python -*-
+#
+# Copyright (c) 2015 by Rocky Bernstein <rb@dustyfeet.com>
+#
+from __future__ import print_function
+import sys, os, getopt
+
+program =  os.path.basename(__file__)
+
+__doc__ = """
+Usage: %s [OPTIONS]... FILE
+
+Examples:
+  %s      foo.pyc
+  %s      foo.py
+  %s -o foo.pydis foo.pyc
+  %s -o /tmp foo.pyc
+
+Options:
+  -o <path>     output decompiled files to this path:
+                if multiple input files are decompiled, the common prefix
+                is stripped from these names and the remainder appended to
+                <path>
+  --help        show this message
+
+""" % ((program,) * 5)
+
+
+Usage_short = \
+"%s [--help] [--verify] [--showasm] [--showast] [-o <path>] FILE|DIR..." % program
+
+from uncompyle6 import check_python_version
+from uncompyle6.disas import disassemble_files
+
+check_python_version(program)
+
+outfile = '-'
+out_base = None
+
+
+try:
+    opts, files = getopt.getopt(sys.argv[1:], 'ho:', ['help'])
+except getopt.GetoptError as e:
+    print('%s: %s' % (os.path.basename(sys.argv[0]), e),  file=sys.stderr)
+    sys.exit(-1)
+
+for opt, val in opts:
+    if opt in ('-h', '--help'):
+        print(__doc__)
+        sys.exit(0)
+    elif opt == '-o':
+        outfile = val
+    else:
+        print(opt)
+        print(Usage_short)
+        sys.exit(1)
+
+# argl, commonprefix works on strings, not on path parts,
+# thus we must handle the case with files in 'some/classes'
+# and 'some/cmds'
+src_base = os.path.commonprefix(files)
+if src_base[-1:] != os.sep:
+    src_base = os.path.dirname(src_base)
+if src_base:
+    sb_len = len( os.path.join(src_base, '') )
+    files = [f[sb_len:] for f in files]
+    del sb_len
+
+if outfile == '-':
+    outfile = None # use stdout
+elif outfile and os.path.isdir(outfile):
+    out_base = outfile; outfile = None
+elif outfile and len(files) > 1:
+    out_base = outfile; outfile = None
+
+disassemble_files(src_base, out_base, files, outfile)

bin/uncompyle6

@@ -1,3 +1,213 @@
 #!/usr/bin/env python
-from uncompyle6.bin.uncompile import main_bin
-main_bin()
+# Mode: -*- python -*-
+#
+# Copyright (c) 2000-2002 by hartmut Goebel <h.goebel@crazy-compilers.com>
+# Copyright (c) 2015 by Rocky Bernstein
+
+"""
+Usage: uncompyle6 [OPTIONS]... [ FILE | DIR]...
+
+Examples:
+  uncompyle6      foo.pyc bar.pyc       # decompile foo.pyc, bar.pyc to stdout
+  uncompyle6 -o . foo.pyc bar.pyc       # decompile to ./foo.pyc_dis and ./bar.pyc_dis
+  uncompyle6 -o /tmp /usr/lib/python1.5 # decompile whole library
+
+Options:
+  -o <path>     output decompiled files to this path:
+                if multiple input files are decompiled, the common prefix
+                is stripped from these names and the remainder appended to
+                <path>
+                  uncompyle6 -o /tmp bla/fasel.pyc bla/foo.pyc
+                    -> /tmp/fasel.pyc_dis, /tmp/foo.pyc_dis
+                  uncompyle6 -o /tmp bla/fasel.pyc bar/foo.pyc
+                    -> /tmp/bla/fasel.pyc_dis, /tmp/bar/foo.pyc_dis
+                  uncompyle6 -o /tmp /usr/lib/python1.5
+                    -> /tmp/smtplib.pyc_dis ... /tmp/lib-tk/FixTk.pyc_dis
+  -c <file>     attempts a disassembly after compiling <file>
+  -d            print timestamps
+  -p <integer>  use <integer> number of processes
+  -r            recurse directories looking for .pyc and .pyo files
+  --verify      compare generated source with input byte-code
+                (requires -o)
+  --help        show this message
+
+Debugging Options:
+  --asm     -a  include byte-code         (disables --verify)
+  --grammar -g  show matching grammar
+  --treee   -t  include syntax tree       (disables --verify)
+
+Extensions of generated files:
+  '.pyc_dis' '.pyo_dis'   successfully decompiled (and verified if --verify)
+    + '_unverified'       successfully decompile but --verify failed
+    + '_failed'           decompile failed (contact author for enhancement)
+"""
+
+from __future__ import print_function
+import sys, os, getopt, time
+
+program =  os.path.basename(__file__)
+
+from uncompyle6 import verify, check_python_version
+from uncompyle6.main import main, status_msg
+
+def usage():
+    print("""usage:
+   %s [--help] [--verify] [--asm] [--tree] [--grammar] [-o <path>] FILE|DIR...
+"""  % program)
+    sys.exit(1)
+
+
+check_python_version(program)
+
+showasm = showast = do_verify = recurse_dirs = False
+numproc = 0
+outfile = '-'
+out_base = None
+codes = []
+timestamp = False
+timestampfmt = "# %Y.%m.%d %H:%M:%S %Z"
+
+try:
+    opts, files = getopt.getopt(sys.argv[1:], 'hagtdro:c:p:',
+                                'help asm grammar recurse timestamp tree verify '
+                                'showgrammar'.split(' '))
+except getopt.GetoptError as e:
+    print('%s: %s' % (os.path.basename(sys.argv[0]), e),  file=sys.stderr)
+    sys.exit(-1)
+
+options = {}
+for opt, val in opts:
+    if opt in ('-h', '--help'):
+        print(__doc__)
+        sys.exit(0)
+    elif opt == '--verify':
+        options['do_verify'] = True
+    elif opt in ('--asm', '-a'):
+        options['showasm'] = True
+        options['do_verify'] = False
+    elif opt in ('--tree', '-t'):
+        options['showast'] = True
+        options['do_verify'] = False
+    elif opt in ('--grammar', '-g'):
+        options['showgrammar'] = True
+    elif opt == '-o':
+        outfile = val
+    elif opt in ('--timestamp', '-d'):
+        timestamp = True
+    elif opt == '-c':
+        codes.append(val)
+    elif opt == '-p':
+        numproc = int(val)
+    elif opt in ('--recurse', '-r'):
+        recurse_dirs = True
+    else:
+        print(opt, file=sys.stderr)
+        usage()
+
+# expand directory if specified
+if recurse_dirs:
+    expanded_files = []
+    for f in files:
+        if os.path.isdir(f):
+            for root, _, dir_files in os.walk(f):
+                for df in dir_files:
+                    if df.endswith('.pyc') or df.endswith('.pyo'):
+                        expanded_files.append(os.path.join(root, df))
+    files = expanded_files
+
+# argl, commonprefix works on strings, not on path parts,
+# thus we must handle the case with files in 'some/classes'
+# and 'some/cmds'
+src_base = os.path.commonprefix(files)
+if src_base[-1:] != os.sep:
+    src_base = os.path.dirname(src_base)
+if src_base:
+    sb_len = len( os.path.join(src_base, '') )
+    files = [f[sb_len:] for f in files]
+    del sb_len
+
+if not files:
+    print("No files given", file=sys.stderr)
+    usage()
+
+
+if outfile == '-':
+    outfile = None # use stdout
+elif outfile and os.path.isdir(outfile):
+    out_base = outfile; outfile = None
+elif outfile and len(files) > 1:
+    out_base = outfile; outfile = None
+
+if timestamp:
+    print(time.strftime(timestampfmt))
+
+if numproc <= 1:
+    try:
+        result = main(src_base, out_base, files, codes, outfile,
+                      **options)
+        if len(files) > 1:
+            mess = status_msg(do_verify, *result)
+            print('# ' + mess)
+            pass
+    except (KeyboardInterrupt):
+        pass
+    except verify.VerifyCmpError:
+        raise
+else:
+    from multiprocessing import Process, Queue
+
+    try:
+        from Queue import Empty
+    except ImportError:
+        from Queue import Empty
+
+    fqueue = Queue(len(files)+numproc)
+    for f in files:
+        fqueue.put(f)
+    for i in range(numproc):
+        fqueue.put(None)
+
+    rqueue = Queue(numproc)
+
+    def process_func():
+        try:
+            (tot_files, okay_files, failed_files, verify_failed_files) = (0, 0, 0, 0)
+            while 1:
+                f = fqueue.get()
+                if f is None:
+                    break
+                (t, o, f, v) = \
+                  main(src_base, out_base, [f], codes, outfile, **options)
+                tot_files += t
+                okay_files += o
+                failed_files += f
+                verify_failed_files += v
+        except (Empty, KeyboardInterrupt):
+            pass
+        rqueue.put((tot_files, okay_files, failed_files, verify_failed_files))
+        rqueue.close()
+
+    try:
+        procs = [Process(target=process_func) for i in range(numproc)]
+        for p in procs:
+            p.start()
+        for p in procs:
+            p.join()
+        try:
+            (tot_files, okay_files, failed_files, verify_failed_files) = (0, 0, 0, 0)
+            while True:
+                (t, o, f, v) = rqueue.get(False)
+                tot_files += t
+                okay_files += o
+                failed_files += f
+                verify_failed_files += v
+        except Empty:
+            pass
+        print('# decompiled %i files: %i okay, %i failed, %i verify failed' %
+              (tot_files, okay_files, failed_files, verify_failed_files))
+    except (KeyboardInterrupt, OSError):
+        pass
+
+
+if timestamp:
+    print(time.strftime(timestampfmt))

circle.yml

@@ -1,13 +1,13 @@
 machine:
     python:
-        version: 2.7.10
+        version: 2.7.8
     environment:
         COMPILE: --compile
 
 dependencies:
     override:
-        - pip install -e .
+        - pip install -r requirements.txt
         - pip install -r requirements-dev.txt
 test:
     override:
-        - python ./setup.py develop && make check-2.6
+        - python ./setup.py develop && make check-2.7

pytest/.gitignore

@@ -1,2 +1 @@
-/.hypothesis
 /__pycache__

pytest/test_CALL_FUNCTION_KW.sh

@@ -1,6 +0,0 @@
-source ../.venv.3.6/bin/activate
-py.test -k test_CALL_FUNCTION_KW
-source ../.venv.3.5/bin/activate
-py.test -k test_CALL_FUNCTION_KW
-source ../.venv.2.7/bin/activate
-py.test -k test_CALL_FUNCTION_KW

pytest/test_build_const_key_map.py

@@ -1,21 +0,0 @@
-import pytest
-# uncompyle6
-from uncompyle6 import PYTHON_VERSION
-from validate import validate_uncompyle
-
-
-@pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
-@pytest.mark.parametrize('text', (
-    "{0.: 'a', -1: 'b'}",   # BUILD_MAP
-    "{'a':'b'}",            # BUILD_MAP
-    "{0: 1}",               # BUILD_MAP
-    "{b'0':1, b'2':3}",     # BUILD_CONST_KEY_MAP
-    "{0: 1, 2: 3}",         # BUILD_CONST_KEY_MAP
-    "{'a':'b','c':'d'}",    # BUILD_CONST_KEY_MAP
-    "{0: 1, 2: 3}",         # BUILD_CONST_KEY_MAP
-    "{'a': 1, 'b': 2}",     # BUILD_CONST_KEY_MAP
-    "{'a':'b','c':'d'}",    # BUILD_CONST_KEY_MAP
-    "{0.0:'b',0.1:'d'}",    # BUILD_CONST_KEY_MAP
-))
-def test_build_const_key_map(text):
-    validate_uncompyle(text)

pytest/test_deparse.py

@@ -20,20 +20,12 @@ def for_range_stmt():
     for i in range(2):
         i+1
 
-# # FIXME: add this test - but for Python 2.7+ only
-# def set_comp():
-#     {y for y in range(3)}
-
-# FIXME: add this test
-def list_comp():
-    [y for y in range(3)]
-
 def get_parsed_for_fn(fn):
     code = fn.__code__ if PYTHON3 else fn.func_code
     return deparse(PYTHON_VERSION, code)
 
 def check_expect(expect, parsed):
-    debug = False
+    debug = True
     i = 2
     max_expect = len(expect)
     for name, offset in sorted(parsed.offsets.keys()):
@@ -168,7 +160,7 @@ return (x, y)
 -------------
 """.split("\n")
     check_expect(expect, parsed)
-    ########################################################
+#     ########################################################
 #     # try
 
 #     expect = """
@@ -299,12 +291,6 @@ return
 Contained in...
     i + 1
     -----
-31
-return
-------
-Contained in...
-for i in range(2): ...
------------------- ...
 34
 return
 ------

pytest/test_disasm.py

@@ -24,7 +24,7 @@ os.chdir(src_dir)
 def test_funcoutput(capfd, test_tuple, function_to_test):
 
     in_file , filename_expected = test_tuple
-    function_to_test(in_file, native=False)
+    function_to_test(in_file)
     resout, reserr = capfd.readouterr()
     expected = open(filename_expected, "r").read()
     if resout != expected:

pytest/test_docstring.py

@@ -1,78 +0,0 @@
-import sys
-from uncompyle6 import PYTHON3
-if PYTHON3:
-    from io import StringIO
-    minint = -sys.maxsize-1
-    maxint = sys.maxsize
-else:
-    from StringIO import StringIO
-    minint = -sys.maxint-1
-    maxint = sys.maxint
-from uncompyle6.semantics.helper import print_docstring
-
-class PrintFake():
-    def __init__(self):
-        self.pending_newlines = 0
-        self.f = StringIO()
-
-    def write(self, *data):
-        if (len(data) == 0) or (len(data) == 1 and data[0] == ''):
-            return
-        out = ''.join((str(j) for j in data))
-        n = 0
-        for i in out:
-            if i == '\n':
-                n += 1
-                if n == len(out):
-                    self.pending_newlines = max(self.pending_newlines, n)
-                    return
-            elif n:
-                self.pending_newlines = max(self.pending_newlines, n)
-                out = out[n:]
-                break
-            else:
-                break
-
-        if self.pending_newlines > 0:
-            self.f.write('\n'*self.pending_newlines)
-            self.pending_newlines = 0
-
-        for i in out[::-1]:
-            if i == '\n':
-                self.pending_newlines += 1
-            else:
-                break
-
-        if self.pending_newlines:
-            out = out[:-self.pending_newlines]
-        self.f.write(out)
-    def println(self, *data):
-        if data and not(len(data) == 1 and data[0] ==''):
-            self.write(*data)
-        self.pending_newlines = max(self.pending_newlines, 1)
-        return
-    pass
-
-def test_docstring():
-
-    for doc, expect in (
-            ("Now is the time",
-             '  """Now is the time"""'),
-           ("""
-Now is the time
-""",
-            '''  """
-  Now is the time
-  """''')
-
-            # (r'''func placeholder - ' and with ("""\nstring\n  """)''',
-            #  """  r'''func placeholder - ' and with (\"\"\"\nstring\n\"\"\")'''"""),
-            # (r"""func placeholder - ' and with ('''\nstring\n''') and \"\"\"\nstring\n\"\"\" """,
-            # """  r\"\"\"func placeholder - ' and with ('''\nstring\n''') and \"\"\"\nstring\n\"\"\" \"\"\"""")
-            ):
-
-        o = PrintFake()
-        # print(doc)
-        # print(expect)
-        print_docstring(o, '  ', doc)
-        assert expect == o.f.getvalue()

pytest/test_fjt.py

@@ -1,69 +0,0 @@
-#!/usr/bin/env python
-from uncompyle6 import PYTHON_VERSION, IS_PYPY
-from uncompyle6.scanner import get_scanner
-from array import array
-def bug(state, slotstate):
-    if state:
-        if slotstate is not None:
-            for key, value in slotstate.items():
-                setattr(state, key, 2)
-
-# From 2.7 disassemble
-# Problem is not getting while, because
-# COME_FROM not added
-def bug_loop(disassemble, tb=None):
-    if tb:
-        try:
-            tb = 5
-        except AttributeError:
-            raise RuntimeError
-        while tb: tb = tb.tb_next
-    disassemble(tb)
-
-def test_if_in_for():
-    code = bug.__code__
-    scan = get_scanner(PYTHON_VERSION)
-    print(PYTHON_VERSION)
-    if 2.7 <= PYTHON_VERSION <= 3.0 and not IS_PYPY:
-        n = scan.setup_code(code)
-        scan.build_lines_data(code, n)
-        scan.build_prev_op(n)
-        fjt = scan.find_jump_targets(False)
-        assert {15: [3], 69: [66], 63: [18]} == fjt
-        assert scan.structs == \
-          [{'start': 0, 'end': 72, 'type': 'root'},
-           {'start': 15, 'end': 66, 'type': 'if-then'},
-           {'start': 31, 'end': 59, 'type': 'for-loop'},
-           {'start': 62, 'end': 63, 'type': 'for-else'}]
-
-        code = bug_loop.__code__
-        n = scan.setup_code(code)
-        scan.build_lines_data(code, n)
-        scan.build_prev_op(n)
-        fjt = scan.find_jump_targets(False)
-        assert{64: [42], 67: [42, 42], 42: [16, 41], 19: [6]} == fjt
-        assert scan.structs == [
-            {'start': 0, 'end': 80, 'type': 'root'},
-            {'start': 3, 'end': 64, 'type': 'if-then'},
-            {'start': 6, 'end': 15, 'type': 'try'},
-            {'start': 19, 'end': 38, 'type': 'except'},
-            {'start': 45, 'end': 67, 'type': 'while-loop'},
-            {'start': 70, 'end': 64, 'type': 'while-else'},
-            # previous bug was not mistaking while-loop for if-then
-            {'start': 48, 'end': 67, 'type': 'while-loop'}]
-
-    elif 3.2 < PYTHON_VERSION <= 3.4:
-        scan.code = array('B', code.co_code)
-        scan.build_lines_data(code)
-        scan.build_prev_op()
-        fjt  = scan.find_jump_targets(False)
-        assert {69: [66], 63: [18]} == fjt
-        assert scan.structs == \
-          [{'end': 72, 'type': 'root', 'start': 0},
-           {'end': 66, 'type': 'if-then', 'start': 6},
-           {'end': 63, 'type': 'if-then', 'start': 18},
-           {'end': 59, 'type': 'for-loop', 'start': 31},
-           {'end': 63, 'type': 'for-else', 'start': 62}]
-    else:
-        assert True, "FIXME: should note fixed"
-    return

pytest/test_grammar.py

@@ -1,65 +0,0 @@
-import re
-from uncompyle6 import PYTHON_VERSION, PYTHON3, IS_PYPY # , PYTHON_VERSION
-from uncompyle6.parser import get_python_parser, python_parser
-from uncompyle6.scanner import get_scanner
-
-def test_grammar():
-
-    def check_tokens(tokens, opcode_set):
-        remain_tokens = set(tokens) - opcode_set
-        remain_tokens = set([re.sub('_\d+$','', t) for t in remain_tokens])
-        remain_tokens = set([re.sub('_CONT$','', t) for t in remain_tokens])
-        remain_tokens = set(remain_tokens) - opcode_set
-        assert remain_tokens == set([]), \
-            "Remaining tokens %s\n====\n%s" % (remain_tokens, p.dumpGrammar())
-
-    p = get_python_parser(PYTHON_VERSION, is_pypy=IS_PYPY)
-    lhs, rhs, tokens, right_recursive = p.checkSets()
-    expect_lhs = set(['expr1024', 'pos_arg'])
-    unused_rhs = set(['build_list', 'call_function', 'mkfunc',
-                      'mklambda',
-                      'unpack', 'unpack_list'])
-    expect_right_recursive = [['designList', ('designator', 'DUP_TOP', 'designList')]]
-    if PYTHON3:
-        expect_lhs.add('load_genexpr')
-
-        unused_rhs = unused_rhs.union(set("""
-        except_pop_except genexpr classdefdeco2 listcomp
-        """.split()))
-        if 3.0 <= PYTHON_VERSION:
-            expect_lhs.add("annotate_arg")
-            expect_lhs.add("annotate_tuple")
-            unused_rhs.add("mkfunc_annotate")
-            pass
-    else:
-        expect_lhs.add('kwarg')
-    assert expect_lhs == set(lhs)
-    assert unused_rhs == set(rhs)
-    assert expect_right_recursive == right_recursive
-    s = get_scanner(PYTHON_VERSION, IS_PYPY)
-    ignore_set = set(
-            """
-            JUMP_BACK CONTINUE RETURN_END_IF
-            COME_FROM COME_FROM_EXCEPT
-            COME_FROM_EXCEPT_CLAUSE
-            COME_FROM_LOOP COME_FROM_WITH
-            COME_FROM_FINALLY ELSE
-            LOAD_GENEXPR LOAD_ASSERT LOAD_SETCOMP LOAD_DICTCOMP
-            LAMBDA_MARKER RETURN_LAST
-            """.split())
-    if 2.6 <= PYTHON_VERSION <= 2.7:
-        opcode_set = set(s.opc.opname).union(ignore_set)
-        check_tokens(tokens, opcode_set)
-    elif PYTHON_VERSION == 3.4:
-        ignore_set.add('LOAD_CLASSNAME')
-        ignore_set.add('STORE_LOCALS')
-        opcode_set = set(s.opc.opname).union(ignore_set)
-        check_tokens(tokens, opcode_set)
-
-def test_dup_rule():
-    import inspect
-    python_parser(PYTHON_VERSION, inspect.currentframe().f_code,
-                  is_pypy=IS_PYPY,
-                  parser_debug={
-                      'dups': True, 'transition': False, 'reduce': False,
-                      'rules': False, 'errorstack': None, 'context': True})

pytest/test_load.py

@@ -0,0 +1,10 @@
+import sys
+from uncompyle6.load import load_file, check_object_path, load_module
+
+def test_load():
+    """Basic test of load_file, check_object_path and load_module"""
+    co = load_file(__file__)
+    obj_path = check_object_path(__file__)
+    version, timestamp, magic_int, co2 = load_module(obj_path)
+    assert sys.version[0:3] == str(version)
+    assert co == co2

pytest/test_single_compile.py

@@ -9,6 +9,8 @@ def test_single_mode():
         'i = j % 4',
         'i = {}',
         'i = []',
+        'while i < 1 or stop:\n    i\n',
+        'while i < 1 or stop:\n    print%s\n' % ('(i)' if PYTHON3 else ' i'),
         'for i in range(10):\n    i\n',
         'for i in range(10):\n    for j in range(10):\n        i + j\n',
         'try:\n    i\nexcept Exception:\n    j\nelse:\n    k\n'

pytest/testdata/if-2.7.right

@@ -1,12 +1,13 @@
 # Python 2.7
 # Embedded file name: simple_source/branching/05_if.py
 
-   6       0  LOAD_NAME             0  'True'
-           3  POP_JUMP_IF_FALSE    15  'to 15'
+   6       0	LOAD_NAME         'True'
+           3	POP_JUMP_IF_FALSE '15'
+
+   7       6	LOAD_NAME         'False'
+           9	STORE_NAME        'b'
+          12	JUMP_FORWARD      '15'
+        15_0	COME_FROM         '12'
+          15	LOAD_CONST        ''
+          18	RETURN_VALUE      ''
 
-   7       6  LOAD_NAME             1  'False'
-           9  STORE_NAME            2  'b'
-          12  JUMP_FORWARD          0  'to 15'
-        15_0  COME_FROM                '12'
-          15  LOAD_CONST            0  ''
-          18  RETURN_VALUE     

pytest/testdata/ifelse-2.7.right

@@ -1,15 +1,16 @@
 # Python 2.7
 # Embedded file name: simple_source/branching/05_ifelse.py
 
-   3       0  LOAD_NAME             0  'True'
-           3  POP_JUMP_IF_FALSE    15  'to 15'
+   3       0	LOAD_NAME         'True'
+           3	POP_JUMP_IF_FALSE '15'
 
-   4       6  LOAD_CONST            0  1
-           9  STORE_NAME            1  'b'
-          12  JUMP_FORWARD          6  'to 21'
+   4       6	LOAD_CONST        1
+           9	STORE_NAME        'b'
+          12	JUMP_FORWARD      '21'
+
+   6      15	LOAD_CONST        2
+          18	STORE_NAME        'd'
+        21_0	COME_FROM         '12'
+          21	LOAD_CONST        ''
+          24	RETURN_VALUE      ''
 
-   6      15  LOAD_CONST            1  2
-          18  STORE_NAME            2  'd'
-        21_0  COME_FROM                '12'
-          21  LOAD_CONST            2  ''
-          24  RETURN_VALUE     

pytest/validate.py

@@ -1,146 +0,0 @@
-# future
-from __future__ import print_function
-# std
-import os
-import difflib
-import subprocess
-import tempfile
-import functools
-from StringIO import StringIO
-# uncompyle6 / xdis
-from uncompyle6 import PYTHON_VERSION, IS_PYPY, deparse_code
-# TODO : I think we can get xdis to support the dis api (python 3 version) by doing something like this there
-from xdis.bytecode import Bytecode
-from xdis.main import get_opcode
-opc = get_opcode(PYTHON_VERSION, IS_PYPY)
-Bytecode = functools.partial(Bytecode, opc=opc)
-
-
-def _dis_to_text(co):
-    return Bytecode(co).dis()
-
-
-def print_diff(original, uncompyled):
-    """
-    Try and display a pretty html line difference between the original and
-    uncompyled code and bytecode if elinks and BeautifulSoup are installed
-    otherwise just show the diff.
-
-    :param original: Text describing the original code object.
-    :param uncompyled: Text describing the uncompyled code object.
-    """
-    original_lines = original.split('\n')
-    uncompyled_lines = uncompyled.split('\n')
-    args = original_lines, uncompyled_lines, 'original', 'uncompyled'
-    try:
-        from bs4 import BeautifulSoup
-        diff = difflib.HtmlDiff().make_file(*args)
-        diff = BeautifulSoup(diff, "html.parser")
-        diff.select_one('table[summary="Legends"]').extract()
-    except ImportError:
-        print('\nTo display diff highlighting run:\n    pip install BeautifulSoup4')
-        diff = difflib.HtmlDiff().make_table(*args)
-
-    with tempfile.NamedTemporaryFile(delete=False) as f:
-        f.write(str(diff).encode('utf-8'))
-
-    try:
-        print()
-        html = subprocess.check_output([
-            'elinks',
-            '-dump',
-            '-no-references',
-            '-dump-color-mode',
-            '1',
-            f.name,
-        ]).decode('utf-8')
-        print(html)
-    except:
-        print('\nFor side by side diff install elinks')
-        diff = difflib.Differ().compare(original_lines, uncompyled_lines)
-        print('\n'.join(diff))
-    finally:
-        os.unlink(f.name)
-
-
-def are_instructions_equal(i1, i2):
-    """
-    Determine if two instructions are approximately equal,
-    ignoring certain fields which we allow to differ, namely:
-
-    * code objects are ignore (should probaby be checked) due to address
-    * line numbers
-
-    :param i1: left instruction to compare
-    :param i2: right instruction to compare
-
-    :return: True if the two instructions are approximately equal, otherwise False.
-    """
-    result = (1==1
-        and i1.opname == i2.opname
-        and i1.opcode == i2.opcode
-        and i1.arg == i2.arg
-        # ignore differences due to code objects
-        # TODO : Better way of ignoring address
-        and (i1.argval == i2.argval or '<code object' in str(i1.argval))
-        # TODO : Should probably recurse to check code objects
-        and (i1.argrepr == i2.argrepr or '<code object' in i1.argrepr)
-        and i1.offset == i2.offset
-        # ignore differences in line numbers
-        #and i1.starts_line
-        and i1.is_jump_target == i2.is_jump_target
-    )
-    return result
-
-
-def are_code_objects_equal(co1, co2):
-    """
-    Determine if two code objects are approximately equal,
-    see are_instructions_equal for more information.
-
-    :param i1: left code object to compare
-    :param i2: right code object to compare
-
-    :return: True if the two code objects are approximately equal, otherwise False.
-    """
-    instructions1 = Bytecode(co1)
-    instructions2 = Bytecode(co2)
-    for opcode1, opcode2 in zip(instructions1, instructions2):
-        if not are_instructions_equal(opcode1, opcode2):
-            return False
-    return True
-
-
-def validate_uncompyle(text, mode='exec'):
-    """
-    Validate decompilation of the given source code.
-
-    :param text: Source to validate decompilation of.
-    """
-    original_code = compile(text, '<string>', mode)
-    original_dis = _dis_to_text(original_code)
-    original_text = text
-
-    deparsed = deparse_code(PYTHON_VERSION, original_code,
-                            compile_mode=mode, out=StringIO())
-    uncompyled_text = deparsed.text
-    uncompyled_code = compile(uncompyled_text, '<string>', 'exec')
-
-    if not are_code_objects_equal(uncompyled_code, original_code):
-
-        uncompyled_dis = _dis_to_text(uncompyled_text)
-
-        def output(text, dis):
-            width = 60
-            return '\n\n'.join([
-                ' SOURCE CODE '.center(width, '#'),
-                text.strip(),
-                ' BYTECODE '.center(width, '#'),
-                dis
-            ])
-
-        original = output(original_text, original_dis)
-        uncompyled = output(uncompyled_text, uncompyled_dis)
-        print_diff(original, uncompyled)
-
-        assert 'original' == 'uncompyled'

requirements-dev.txt

@@ -1,3 +1,2 @@
-pytest>=3.0.0
+pytest
 flake8
-hypothesis

requirements.txt

@@ -1,2 +1 @@
-# Pick up stuff from setup.py
--e .
+spark_parser >= 1.1.0

setup.py

@@ -2,28 +2,36 @@
 
 """Setup script for the 'uncompyle6' distribution."""
 
-from __pkginfo__ import \
-    author,           author_email,       install_requires,          \
-    license,          long_description,   classifiers,               \
-    entry_points,     modname,            py_modules,                \
-    short_desc,       VERSION,            web,                       \
-    zip_safe
+# Get the package information used in setup().
+# from __pkginfo__ import \
+#     author,           author_email,       classifiers,                    \
+#     install_requires, license,            long_description,               \
+#     modname,          packages,           py_modules,   \
+#     short_desc,       version,            web,              zip_safe
+
+from __pkginfo__ import \
+    author,           author_email,                                  \
+    long_description,                                                \
+    modname,          packages,           py_modules,       scripts, \
+    short_desc,       version,            web,              zip_safe
+
+__import__('pkg_resources')
+from setuptools import setup
 
-from setuptools import setup, find_packages
 setup(
        author             = author,
        author_email       = author_email,
-       classifiers        = classifiers,
+       # classifiers        = classifiers,
        description        = short_desc,
-       entry_points       = entry_points,
-       install_requires   = install_requires,
-       license            = license,
+       # install_requires   = install_requires,
+       # license            = license,
        long_description   = long_description,
-       name               = modname,
-       packages           = find_packages(),
        py_modules         = py_modules,
+       name               = modname,
+       packages           = packages,
        test_suite         = 'nose.collector',
        url                = web,
-       tests_require     = ['nose>=1.0'],
-       version            = VERSION,
+       setup_requires     = ['nose>=1.0'],
+       scripts            = scripts,
+       version            = version,
        zip_safe           = zip_safe)

test/Makefile

@@ -3,7 +3,7 @@ PHONY=check clean dist distclean test test-unit test-functional rmChangeLog clea
 GIT2CL ?= git2cl
 PYTHON ?= python
 
-PYTHON_VERSION = $(shell $(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2)
+PYTHON_VERSION = $(shell $(PYTHON) -V | cut -d ' ' -f 2 | cut -d'.' -f1,2)
 NATIVE_CHECK = check-$(PYTHON_VERSION)
 
 # Set COMPILE='--compile' to force compilation before check
@@ -16,94 +16,52 @@ check-short:
 
 # Run all tests
 check:
-	$(MAKE) check-$(PYTHON_VERSION)
+	@$(PYTHON) -V && PYTHON_VERSION=`$(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2`; \
+	$(MAKE) check-$$PYTHON_VERSION
 
 #: Run working tests from Python 2.6 or 2.7
-check-2.4 check-2.5 check-2.6 check-2.7: check-bytecode-2 check-bytecode-3 check-bytecode-1  check-native-short
-
-#: Run working tests from Python 3.0
-check-3.0: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify $(COMPILE)
-
-#: Run working tests from Python 3.1
-check-3.1: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify $(COMPILE)
-
-#: Run working tests from Python 3.2
-check-3.2: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify $(COMPILE)
+check-2.6 check-2.7: check-bytecode-sans-3.5 check-2.7-ok
 
 #: Run working tests from Python 3.3
 check-3.3: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.3 --verify $(COMPILE)
+
+#: Run working tests from Python 3.5
+check-3.5: check-bytecode
 
 #: Run working tests from Python 3.4
 check-3.4: check-bytecode check-3.4-ok check-2.7-ok
 	$(PYTHON) test_pythonlib.py --bytecode-3.4 --verify $(COMPILE)
 
-#: Run working tests from Python 3.5
-check-3.5: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.5 --verify $(COMPILE)
-
-#: Run working tests from Python 3.6
-check-3.6: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.6 --verify $(COMPILE)
-
 #: Check deparsing only, but from a different Python version
 check-disasm:
 	$(PYTHON) dis-compare.py
 
-#: Check deparsing bytecode 1.x only
-check-bytecode-1:
-	$(PYTHON) test_pythonlib.py --bytecode-1.5
-
-#: Check deparsing bytecode 2.x only
+#: Check deparsing bytecode only
 check-bytecode-2:
-	$(PYTHON) test_pythonlib.py \
-	--bytecode-2.1 --bytecode-2.2 --bytecode-2.3 --bytecode-2.4 \
-        --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 --bytecode-pypy2.7
+	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.6 --bytecode-2.7
 
-#: Check deparsing bytecode 3.x only
-check-bytecode-3:
-	$(PYTHON) test_pythonlib.py --bytecode-3.0 \
-       --bytecode-3.1 --bytecode-3.2 --bytecode-3.3 \
-       --bytecode-3.4 --bytecode-3.5 --bytecode-3.6 --bytecode-pypy3.2
+#: Check deparsing bytecode only
+check-bytecode:
+	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 \
+        --bytecode-3.2 --bytecode-3.3 --bytecode-3.4 --bytecode-3.5
 
-#: Check deparsing bytecode that works running Python 2 and Python 3
-check-bytecode: check-bytecode-3
-	$(PYTHON) test_pythonlib.py \
-	--bytecode-2.1 --bytecode-2.2 --bytecode-2.3 --bytecode-2.4 \
-        --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 \
-        --bytecode-pypy2.7 --bytecode-1
-
-
-#: Check deparsing Python 2.1
-check-bytecode-2.1:
-	$(PYTHON) test_pythonlib.py --bytecode-2.1
-
-#: Check deparsing Python 2.2
-check-bytecode-2.2:
-	$(PYTHON) test_pythonlib.py --bytecode-2.2
-
-#: Check deparsing Python 2.3
-check-bytecode-2.3:
-	$(PYTHON) test_pythonlib.py --bytecode-2.3
-
-#: Check deparsing Python 2.4
-check-bytecode-2.4:
-	$(PYTHON) test_pythonlib.py --bytecode-2.4
+#: Check deparsing bytecode only
+check-bytecode-sans-3.5:
+	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 \
+        --bytecode-3.2 --bytecode-3.3 --bytecode-3.4
 
 #: Check deparsing Python 2.5
 check-bytecode-2.5:
 	$(PYTHON) test_pythonlib.py --bytecode-2.5
 
-#: Check deparsing Python 3.0
-check-bytecode-3.0:
-	$(PYTHON) test_pythonlib.py --bytecode-3.0
+#: Check deparsing Python 2.6
+check-bytecode-2.6:
+	$(PYTHON) test_pythonlib.py --bytecode-2.6
 
-#: Check deparsing Python 3.1
-check-bytecode-3.1:
-	$(PYTHON) test_pythonlib.py --bytecode-3.1
+#: Check deparsing Python 2.7
+check-bytecode-2.7:
+	$(PYTHON) test_pythonlib.py --bytecode-2.7
 
 #: Check deparsing Python 3.2
 check-bytecode-3.2:
@@ -121,41 +79,9 @@ check-bytecode-3.4:
 check-bytecode-3.5:
 	$(PYTHON) test_pythonlib.py --bytecode-3.5
 
-#: Check deparsing Python 3.6
-check-bytecode-3.6:
-	$(PYTHON) test_pythonlib.py --bytecode-3.6
-
-#: Get grammar coverage for Python 2.4
-grammar-coverage-2.4:
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-24.cover $(PYTHON) test_pythonlib.py --bytecode-2.4
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-24.cover $(PYTHON) test_pyenvlib.py --2.4.6
-
-#: Get grammar coverage for Python 2.5
-grammar-coverage-2.5:
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-25.cover $(PYTHON) test_pythonlib.py --bytecode-2.5
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-25.cover $(PYTHON) test_pyenvlib.py --2.5.6
-
-#: Get grammar coverage for Python 2.6
-grammar-coverage-2.6:
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-26.cover $(PYTHON) test_pythonlib.py --bytecode-2.6
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-26.cover $(PYTHON) test_pyenvlib.py --2.6.9
-
-#: Get grammar coverage for Python 2.7
-grammar-coverage-2.7:
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-27.cover $(PYTHON) test_pythonlib.py --bytecode-2.7
-	SPARK_PARSER_COVERAGE=/tmp/spark-grammar-27.cover $(PYTHON) test_pyenvlib.py --2.7.13
-
 #: short tests for bytecodes only for this version of Python
 check-native-short:
-	$(PYTHON) test_pythonlib.py --bytecode-$(PYTHON_VERSION) --weak-verify $(COMPILE)
-
-#: Run longer Python 2.6's lib files known to be okay
-check-2.4-ok:
-	$(PYTHON) test_pythonlib.py --ok-2.4 --verify $(COMPILE)
-
-#: Run longer Python 2.6's lib files known to be okay
-check-2.6-ok:
-	$(PYTHON) test_pythonlib.py --ok-2.6 --verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-$(PYTHON_VERSION) --verify $(COMPILE)
 
 #: Run longer Python 2.7's lib files known to be okay
 check-2.7-ok:
@@ -169,18 +95,6 @@ check-3.2-ok:
 check-3.4-ok:
 	$(PYTHON) test_pythonlib.py --ok-3.4 --verify $(COMPILE)
 
-#: PyPy of some sort. E.g. [PyPy 5.0.1 with GCC 4.8.4]
-# Skip for now
-2.6:
-
-#: PyPy 5.0.x with Python 2.7 ...
-pypy-2.7 5.0 5.3:
-	$(PYTHON) test_pythonlib.py --bytecode-pypy2.7 --verify
-
-#: PyPy 2.4.x with Python 3.2 ...
-pypy-3.2 2.4:
-	$(PYTHON) test_pythonlib.py --bytecode-pypy3.2 --verify
-
 clean: clean-py-dis clean-dis clean-unverified
 
 clean-dis:
@@ -189,6 +103,6 @@ clean-dis:
 clean-unverified:
 	find . -name '*_unverified' -exec rm -v '{}' ';'
 
-#: Clean temporary compile/decompile/verify directories in /tmp
+#: Clean temporary compile/decompile/verify direcotries in /tmp
 clean-py-dis:
 	rm -fr /tmp/py-dis-* || true

test/add-test.py

@@ -2,15 +2,11 @@
 """ Trivial helper program to bytecompile and run an uncompile
 """
 import os, sys, py_compile
-assert len(sys.argv) >= 2
+assert len(sys.argv) == 2
+path = sys.argv[1]
+short = os.path.basename(path)
 version = sys.version[0:3]
-for path in sys.argv[1:]:
-    short = os.path.basename(path)
-    if hasattr(sys, 'pypy_version_info'):
-        cfile =  "bytecode_pypy%s/%s" % (version, short) + 'c'
-    else:
-        cfile =  "bytecode_%s/%s" % (version, short) + 'c'
-    print("byte-compiling %s to %s" % (path, cfile))
-    py_compile.compile(path, cfile)
-    if isinstance(version, str) or version >= (2, 6, 0):
-        os.system("../bin/uncompyle6 -a -t %s" % cfile)
+cfile =  "bytecode_%s/%s" % (version, short) + 'c'
+print("byte-compiling %s to %s" % (path, cfile))
+py_compile.compile(path, cfile)
+os.system("../bin/uncompyle6 -a -t %s" % cfile)