One last grammar typo

Reduced checking via "make check-short"

.gitignore

@@ -1,11 +1,15 @@
-*.pyo
 *.pyc
+*.pyo
 *_dis
 *~
 /.cache
 /.eggs
+/.hypothesis
+/.idea
+/.pytest_cache
 /.python-version
 /.tox
+/.venv*
 /README
 /__pkginfo__.pyc
 /dist
@@ -14,9 +18,7 @@
 /tmp
 /uncompyle6.egg-info
 /unpyc
+ChangeLog
 __pycache__
 build
-/.venv*
-/.idea
-/.hypothesis
-ChangeLog
+nohup.out

.travis.yml

@@ -4,7 +4,7 @@ sudo: false
 
 python:
   - '3.5'
-  - '2.7.12'
+  - '2.7'
   - '2.6'
   - '3.3'
   - '3.4'

HOW-TO-REPORT-A-BUG.md

@@ -57,6 +57,19 @@ disassembler called `pydisasm`.
 
 ### Semantic equivalence vs. exact source code
 
+Consider how Python compiles something like "(x*y) + 5". Early on
+Python creates an "abstract syntax tree" (AST) for this. And this is
+"abstract" in the sense that unimportant, redundant or unnecceary
+items have been removed. Here, this means that any notion that you
+wrote "x+y" in parenthesis is lost, since in this context they are
+unneeded. Also lost is the fact that the multiplication didn't have
+spaces around it while the addition did. It should not come as a
+surprise then that the bytecode which is derived from the AST also has
+no notion of such possible variation. Generally this kind of thing
+isn't noticed since the Python community has laid out a very rigid set
+of formatting guidelines; and it has largely beaten the community into
+compliance.
+
 Almost all versions of Python can perform some sort of code
 improvement that can't be undone. In earlier versions of Python it is
 rare; in later Python versions, it is more common.
@@ -66,7 +79,7 @@ If the code emitted is semantically equivalent, then this isn't a bug.
 
 For example the code might be
 
-```
+```python
 if a:
   if b:
      x = 1
@@ -74,7 +87,7 @@ if a:
 
 and we might produce:
 
-```
+```python
 if a and b:
   x = 1
 ```
@@ -87,24 +100,35 @@ else:
 
 ```
 
-may come out as `elif`.
+may come out as `elif` or vice versa.
 
 
 As mentioned in the README, It is possible that Python changes what
 you write to be more efficient. For example, for:
 
 
-```
+```python
 if True:
   x = 5
 ```
 
 Python will generate code like:
 
-```
+```python
 x = 5
 ```
 
+Even more extreme, if your code is:
+
+```python
+if False:
+   x = 1
+   y = 2
+   # ...
+```
+
+Python will eliminate the entire "if" statement.
+
 So just because the text isn't the same, does not
 necessarily mean there's a bug.
 

Makefile

@@ -27,20 +27,18 @@ check:
 check-short: pytest
 	$(MAKE) -C test check-short
 
+# Note for 2.6 use <=3.0.1 see requirements-dev.txt
 #: Tests for Python 2.7, 3.3 and 3.4
-check-2.7 check-3.3 check-3.4: pytest
+check-2.6 check-2.7 check-3.3 check-3.4 check-3.5: pytest
 	$(MAKE) -C test $@
 
 #: Tests for Python 3.2 and 3.5 - pytest doesn't work here
 # Or rather 3.5 doesn't work not on Travis
-check-3.0 check-3.1 check-3.2 check-3.5 check-3.6:
+check-3.0 check-3.1 check-3.2 check-3.6:
 	$(MAKE) -C test $@
 
 check-3.7: pytest
-
-#:Tests for Python 2.6 (doesn't have pytest)
-check-2.6:
-	$(MAKE) -C test $@
+	$(MAKE) -C test check
 
 #:PyPy 2.6.1 PyPy 5.0.1, or PyPy 5.8.0-beta0
 # Skip for now

NEWS

@@ -1,3 +1,68 @@
+uncompyle6 3.2.3 2018-06-04 Michael Cohen flips and Fleetwood Redux
+
+- Python 1.3 support 3.0 bug and
+- fix botched parameter ordering of 3.x in last release
+
+uncompyle6 3.2.2 2018-06-04 When I'm 64
+
+- Python 3.0 support and bug fixes
+
+uncompyle6 3.2.1 2018-06-04 MF
+
+- Python 1.4 and 1.5 bug fixes
+
+uncompyle6 3.2.0 2018-05-19 Rocket Scientist
+
+- Add rudimentary 1.4 support (still a bit buggy)
+- add --tree+ option to show formatting rule, when it is constant
+- Python 2.7.15candidate1 support (via xdis)
+- bug fixes, especially for 3.7 (but 2.7 and 3.6 and others as well)
+
+uncompyle6 3.1.3 2018-04-16
+
+- Add some Python 3.7 rules, such as for handling LOAD_METHOD (not complete)
+- Fix some fragment bugs
+- small doc changes
+
+uncompyle6 3.1.2 2018-04-08 Eastern Orthodox Easter
+
+- Python 3.x subclass and call parsing fixes
+- Allow/note running on Python 3.1
+- improve 3.5+ BUILD_MAP_UNPACK
+- DRY instruction building code between 2.x and 3.x
+- expand testing
+
+uncompyle6 3.1.1 2018-04-01 Easter April Fool's
+
+Jesus on Friday's New York Times puzzle: "I'm stuck on 2A"
+
+- fill out 3.5+ BUILD_MAP_UNPACK (more work is needed)
+- fill out 3.4+ CALL_FUNCTION_... (more work is needed)
+- fill out 3.5 MAKE_FUNCTION  (more work is needed)
+- reduce 3.5, 3.6 control-flow bugs
+- reduce ambiguity in rules that lead to long (exponential?) parses
+- limit/isolate some 2.6/2.7,3.x grammar rules
+- more runtime testing of decompiled code
+- more removal of parenthesis around calls via setting precidence
+
+uncompyle6 3.1.0 2018-03-21 Equinox
+
+- Add code_deparse_with_offset() fragment function.
+- Correct paramenter call fragment deparse_code()
+- Lots of 3.6, 3.x, and 2.7 bug fixes
+  About 5% of 3.6 fail parsing now. But
+  semantics still needs much to be desired.
+
+uncompyle6 3.0.1 2018-02-17
+
+- All Python 2.6.9 standard library files weakly verify
+- Many 3.6 fixes. 84% of the first 200 standard library files weakly compile.
+  One more big push is needed to get the remaining to compile
+- Many decompilation fixes for other Python versions
+- Add more to the test framework
+- And more add tests target previous existing bugs more completely
+- sync recent license changes in metadata
+
 uncompyle6 3.0.0 2018-02-17
 
 - deparse_code() and lookalikes from the various semantic actions are
@@ -10,7 +75,7 @@ uncompyle6 3.0.0 2018-02-17
   of jumps, and messes up the peephole-like analysis that is
   done for control flow since we don't have something better in place.
 - Code has been reorganized to be more instruction nametuple based where it
-  has been more byecode array based. There was and still is code that had
+  has been more bytecode array based. There was and still is code that had
   had magic numbers to advance instructions or to pick out operands.
 - Bug fixes in numerous other Python versions
 - Instruction display improved
@@ -28,7 +93,7 @@ uncompyle6 2.16.0 2018-02-17
 - Better 2.7 end_if and COME_FROM determination
 - Fix up 3.6+ CALL_FUNCTION_EX
 - Misc pydisasm fixes
-- Wierd comprehension bug seen via new loctraceback
+- Weird comprehension bug seen via new loctraceback
 - Fix Python 3.5+ CALL_FUNCTION_VAR and BUILD_LIST_UNPACK in call; with this
   we can can handle 3.5+ f(a, b, *c, *d, *e) now
 
@@ -81,7 +146,7 @@ Decompilation bug fixes, mostly 3.6 and pre 2.7
 - limit pypy customization to pypy
 - Add addr fields in COME_FROMS
 - Allow use of full instructions in parser reduction routines
-- Reduce grammar in Pythion 3 by specialization more to specific
+- Reduce grammar in Python 3 by specialization more to specific
   Python versions
 - Match Python AST names more closely when possible
 
@@ -99,7 +164,7 @@ uncompyle6 2.14.0 2017-11-26 johnnybamazing
   and remove used grammar rules
 - Fix a number of bytecode decompile problems
   (many more remain)
-- Add stdlib/runtests.sh for even more rigourous testing
+- Add stdlib/runtests.sh for even more rigorous testing
 
 uncompyle6 2.13.3 2017-11-13
 
@@ -123,7 +188,7 @@ Overall: better 3.6 decompiling and some much needed code refactoring and cleanu
   added to assist here. Ignoring errors may be okay because the fragment parser often just needs,
   well, *fragments*.
 - Distinguish RETURN_VALUE from RETURN_END_IF in exception bodies better in 3.6
-- bug in 3.x language changes: import queue va import Queue
+- bug in 3.x language changes: import queue via import Queue
 - reinstate some bytecode tests since decompiling has gotten better
 - Revise how to report a bug
 
@@ -158,8 +223,8 @@ uncompyle6 2.11.4 2017-08-15
 
 * scanner and parser now allow 3-part version string lookups,
   e.g. 2.7.1 We allow a float here, but if passed a string like '2.7'. or
-* unpin 3.5.1. xdis 3.5.4 has been releasd and fixes the problems we had. Use that.
-* some routnes here moved to xdis. Use the xdis version
+* unpin 3.5.1. xdis 3.5.4 has been release and fixes the problems we had. Use that.
+* some routines here moved to xdis. Use the xdis version
 * README.rst: Link typo Name is trepan2 now not trepan
 * xdis-forced change adjust for COMPARE_OP "is-not" in
   semanatic routines. We need "is not".
@@ -255,9 +320,9 @@ uncompyle6 2.9.8 2016-12-16
 - fix bug in --verify option
 - DRY (a little) control-flow detection
 - fix syntax in tuples with one element
-- if AST rule inheritence in Python 2.5
+- if AST rule inheritance in Python 2.5
 - NAME_MODULE removal for Python <= 2.4
-- verifycall fixes for Python <= 2.4
+- verify call fixes for Python <= 2.4
 - more Python lint
 
 uncompyle6 2.9.7 2016-12-16
@@ -293,7 +358,7 @@ uncompyle6 2.9.6 2016-11-20
   in the results.
 - better control flow debugging output
 - Python 2 and 3 detect structure code is more similar
-- Handle Docstrings with embedded tiple quotes (""")
+- Handle Docstrings with embedded triple quotes (""")
 
 uncompyle6 2.9.5 2016-11-13
 

README.rst

@@ -1,4 +1,4 @@
-|buildstatus|
+|buildstatus| |Latest Version| |Supported Python Versions|
 
 uncompyle6
 ==========
@@ -11,8 +11,9 @@ Introduction
 ------------
 
 *uncompyle6* translates Python bytecode back into equivalent Python
-source code. It accepts bytecodes from Python version 1.5, and 2.1 to
-3.7 or so, including PyPy bytecode and Dropbox's Python 2.5 bytecode.
+source code. It accepts bytecodes from Python version 1.3 to version
+3.7, spanning over 22 years of Python releases. We include Dropbox's
+Python 2.5 bytecode and some PyPy bytecode.
 
 Why this?
 ---------
@@ -29,11 +30,11 @@ CPython bytecode decompilers is the ability to deparse just
 *fragments* of source code and give source-code information around a
 given bytecode offset.
 
-I use the tree fragments to deparse fragments of code inside my
-trepan_ debuggers_. For that, bytecode offsets are recorded and
-associated with fragments of the source code. This purpose, although
-compatible with the original intention, is yet a little bit different.
-See this_ for more information.
+I use the tree fragments to deparse fragments of code *at run time*
+inside my trepan_ debuggers_. For that, bytecode offsets are recorded
+and associated with fragments of the source code. This purpose,
+although compatible with the original intention, is yet a little bit
+different.  See this_ for more information.
 
 Python fragment deparsing given an instruction offset is useful in
 showing stack traces and can be encorporated into any program that
@@ -52,8 +53,17 @@ You get the idea. This code pulls all of these forks together and
 *moves forward*. There is some serious refactoring and cleanup in this
 code base over those old forks.
 
-This project has the most complete support for Python 3.3 and above
-and the best all-around Python support.
+This demonstrably does the best in decompiling Python across all
+Python versions. And even when there is another project that only
+provides decompilation for subset of Python versions, we generally do
+demonstrably better for those as well.
+
+How can we tell? By taking Python bytecode that comes distributed with
+that version of Python and decompiling these.  Among those that
+successfully decompile, we can then make sure the resulting programs
+are syntactically correct by running the Python interpreter for that
+bytecode version.  Finally, in cases where the program has a test for
+itself, we can run the check on the decompiled code.
 
 We are serious about testing, and use automated processes to find
 bugs. In the issue trackers for other decompilers, you will find a
@@ -66,7 +76,7 @@ Requirements
 The code here can be run on Python versions 2.6 or later, PyPy 3-2.4,
 or PyPy-5.0.1.  Python versions 2.4-2.7 are supported in the
 python-2.4 branch.  The bytecode files it can read have been tested on
-Python bytecodes from versions 1.5, 2.1-2.7, and 3.0-3.6 and the
+Python bytecodes from versions 1.4, 2.1-2.7, and 3.0-3.6 and the
 above-mentioned PyPy versions.
 
 Installation
@@ -136,26 +146,26 @@ All of the Python decompilers that I have looked at have problems
 decompiling Python's control flow. In some cases we can detect an
 erroneous decompilation and report that.
 
-*Verification* is the process of decompiling bytecode, compiling with
-a Python for that bytecode version, and then comparing the bytecode
-produced by the decompiled/compiled program. Some allowance is made
-for inessential differences. But other semantically equivalent
-differences are not caught. For example ``1 and 0`` is decompiled to
-the equivalent ``0``; remnants of the first true evaluation (1) is
-lost when Python compiles this. When Python next compiles ``0`` the
-resulting code is simpler.
+In older versions of Python it was possible to verify bytecode by
+decompiling bytecode, and then compiling using the Python interpreter
+for that bytecode version. Having done this the bytecode produced
+could be compared with the original bytecode. However as Python's code
+generation got better, this is no longer feasible.
 
-*Weak Verification*
-on the other hand doesn't check bytecode for equivalence but does
-check to see if the resulting decompiled source is a valid Python
-program by running the Python interpreter. Because the Python language
-has changed so much, for best results you should use the same Python
-Version in checking as used in the bytecode.
+There verification that we use that doesn't check bytecode for
+equivalence but does check to see if the resulting decompiled source
+is a valid Python program by running the Python interpreter. Because
+the Python language has changed so much, for best results you should
+use the same Python version in checking as was used in creating the
+bytecode.
 
-Finally, we have automated running the standard Python tests after
-first compiling and decompiling the test program. Results here are a
-bit weak (if not better than most other Python decompilers). But over
-time this will probably get better.
+There are however an interesting class of these programs that is
+readily available give stronger verification: those programs that
+when run check some computation, or even better themselves.
+
+And already Python has a set of programs like this: the test suite
+for the standard library that comes with Python. We have some
+code in `test/stdlib` to facilitate this kind of checking.
 
 Python support is strongest in Python 2 for 2.7 and drops off as you
 get further away from that. Support is also probably pretty good for
@@ -165,19 +175,21 @@ that era was minimal)
 
 There is some work to do on the lower end Python versions which is
 more difficult for us to handle since we don't have a Python
-interpreter for versions 1.5, 1.6, and 2.0.
+interpreter for versions 1.6, and 2.0.
 
 In the Python 3 series, Python support is is strongest around 3.4 or
 3.3 and drops off as you move further away from those versions. Python
-3.6 changes things drastically by using word codes rather than byte
-codes. As a result, the jump offset field in a jump instruction
-argument has been reduced. This makes the `EXTENDED_ARG` instructions
-are now more prevalent in jump instruction; previously they had been
-rare.  Perhaps to compensate for the additional `EXTENDED_ARG`
-instructions, additional jump optimization has been added. So in sum
-handling control flow by ad hoc means as is currently done is worse.
+3.0 is weird in that it in some ways resembles 2.6 more than it does
+3.1 or 2.7. Python 3.6 changes things drastically by using word codes
+rather than byte codes. As a result, the jump offset field in a jump
+instruction argument has been reduced. This makes the `EXTENDED_ARG`
+instructions are now more prevalent in jump instruction; previously
+they had been rare.  Perhaps to compensate for the additional
+`EXTENDED_ARG` instructions, additional jump optimization has been
+added. So in sum handling control flow by ad hoc means as is currently
+done is worse.
 
-Also, between Python 3.5, 3.6 and 3.7 there have been major changes to the
+Between Python 3.5, 3.6 and 3.7 there have been major changes to the
 `MAKE_FUNCTION` and `CALL_FUNCTION` instructions.
 
 Currently not all Python magic numbers are supported. Specifically in
@@ -203,11 +215,12 @@ There is lots to do, so please dig in and help.
 See Also
 --------
 
-* https://github.com/zrax/pycdc : supports all versions of Python and is written in C++. Support for later Python 3 versions is a bit lacking though.
-* https://code.google.com/archive/p/unpyc3/ : supports Python 3.2 only. The above projects use a different decompiling technique than what is used here.
-* https://github.com/figment/unpyc3/ : fork of above, but supports Python 3.3 only. Includes some fixes like supporting function annotations
-* The HISTORY_ file.
+* https://github.com/zrax/pycdc : purports to support all versions of Python. It is written in C++ and is most accurate for Python versions around 2.7 and 3.3 when the code was more actively developed. Accuracy for more recent versions of Python 3 and early versions of Python are especially lacking. See its `issue tracker <https://github.com/zrax/pycdc/issues>`_ for details. Currently lightly maintained.
+* https://code.google.com/archive/p/unpyc3/ : supports Python 3.2 only. The above projects use a different decompiling technique than what is used here. Currently unmaintained.
+* https://github.com/figment/unpyc3/ : fork of above, but supports Python 3.3 only. Includes some fixes like supporting function annotations. Currently unmaintained.
+* https://github.com/wibiti/uncompyle2 : supports Python 2.7 only, but does that fairly well. There are situtations where `uncompyle6` results are incorrect while `uncompyle2` results are not, but more often uncompyle6 is correct when uncompyle2 is not. Because `uncompyle6` adheres to accuracy over idiomatic Python, `uncompyle2` can produce more natural-looking code when it is correct. Currently `uncompyle2` is lightly maintained. See its issue `tracker <https://github.com/wibiti/uncompyle2/issues>`_ for more details
 * `How to report a bug <https://github.com/rocky/python-uncompyle6/blob/master/HOW-TO-REPORT-A-BUG.md>`_
+* The HISTORY_ file.
 * https://github.com/rocky/python-xdis : Cross Python version disassembler
 * https://github.com/rocky/python-xasm : Cross Python version assembler
 * https://github.com/rocky/python-uncompyle6/wiki : Wiki Documents which describe the code and aspects of it in more detail
@@ -225,3 +238,6 @@ See Also
 .. _PJOrion: http://www.koreanrandom.com/forum/topic/15280-pjorion-%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%82%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5-%D0%BA%D0%BE%D0%BC%D0%BF%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F-%D0%B4%D0%B5%D0%BA%D0%BE%D0%BC%D0%BF%D0%B8%D0%BB%D1%8F%D1%86%D0%B8%D1%8F-%D0%BE%D0%B1%D1%84
 .. _Deobfuscator: https://github.com/extremecoders-re/PjOrion-Deobfuscator
 .. _Py2EXE: https://en.wikipedia.org/wiki/Py2exe
+.. |Supported Python Versions| image:: https://img.shields.io/pypi/pyversions/uncompyle6.svg
+.. |Latest Version| image:: https://badge.fury.io/py/uncompyle6.svg
+		 :target: https://badge.fury.io/py/uncompyle6

__pkginfo__.py

@@ -35,6 +35,7 @@ classifiers =  ['Development Status :: 5 - Production/Stable',
                 'Programming Language :: Python :: 2.5',
                 'Programming Language :: Python :: 2.6',
                 'Programming Language :: Python :: 2.7',
+                'Programming Language :: Python :: 3.0',
                 'Programming Language :: Python :: 3.1',
                 'Programming Language :: Python :: 3.2',
                 'Programming Language :: Python :: 3.3',
@@ -56,9 +57,9 @@ entry_points       = {
     ]}
 ftp_url            = None
 install_requires   = ['spark-parser >= 1.8.5, < 1.9.0',
-                      'xdis >= 3.6.9, < 3.7.0', 'six']
+                      'xdis >= 3.8.4, < 3.9.0']
 
-license            = 'MIT'
+license            = 'GPL3'
 mailing_list       = 'python-debugger@googlegroups.com'
 modname            = 'uncompyle6'
 py_modules         = None

admin-tools/check-newer-versions.sh

@@ -16,6 +16,7 @@ if ! source ./setup-master.sh ; then
 fi
 cd ..
 for version in $PYVERSIONS; do
+    echo --- $version ---
     if ! pyenv local $version ; then
 	exit $?
     fi
@@ -23,4 +24,5 @@ for version in $PYVERSIONS; do
     if ! make check; then
 	exit $?
     fi
+    echo === $version ===
 done

admin-tools/check-older-versions.sh

@@ -15,6 +15,7 @@ fi
 
 cd ..
 for version in $PYVERSIONS; do
+    echo --- $version ---
     if ! pyenv local $version ; then
 	exit $?
     fi
@@ -22,4 +23,5 @@ for version in $PYVERSIONS; do
     if ! make check ; then
 	exit $?
     fi
+    echo === $version ===
 done

admin-tools/pycdc-runtests.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+# Use pycdc to run our test/bytecode* test suite
+bs=${BASH_SOURCE[0]}
+testdir=$(dirname $bs)/../test
+fulldir=$(readlink -f $testdir)
+cd $fulldir
+for dir in bytecode_* ; do
+    echo ========= $dir ================
+    cd $fulldir/$dir
+    for file in *.pyc; do
+	if ! pycdc $file > /dev/null ; then
+	    echo -----  $dir/$file ------
+	fi
+    done
+done

admin-tools/pyenv-newer-versions

@@ -5,4 +5,4 @@ if [[ $0 == ${BASH_SOURCE[0]} ]] ; then
     echo "This script should be *sourced* rather than run directly through bash"
     exit 1
 fi
-export PYVERSIONS='3.5.3 3.6.3 2.6.9 3.3.6 2.7.14 3.4.2'
+export PYVERSIONS='3.5.5 3.6.5 2.6.9 3.3.7 2.7.14 3.2.6 3.1.5 3.4.8'

admin-tools/run-pyenvlib-test-all.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+# Runs test_pyenvlib.test on all versions of Python master.
+function finish {
+  cd $owd
+}
+
+# FIXME put some of the below in a common routine
+owd=$(pwd)
+trap finish EXIT
+
+cd $(dirname ${BASH_SOURCE[0]})
+if ! source ./pyenv-newer-versions ; then
+    exit $?
+fi
+if ! source ./setup-master.sh ; then
+    exit $?
+fi
+cd ../test
+for version in $PYVERSIONS; do
+    if ! pyenv local $version ; then
+	exit $?
+    fi
+    echo "====== Running test_pyenvlib.py on $version ====="
+    if ! python ./test_pyenvlib.py --weak-verify --max 800 --${version} ; then
+	exit $?
+    fi
+    echo "------ Done test_pyenvlib.py on $version -----"
+done

admin-tools/setup-master.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-PYTHON_VERSION=3.6.3
+PYTHON_VERSION=3.6.5
 
 # FIXME put some of the below in a common routine
 function finish {

admin-tools/uncompyle2-runtests.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+# Use pycdc to run our test/bytecode_2.7* test suite
+bs=${BASH_SOURCE[0]}
+topdir=$(dirname $bs)/..
+(cd $topdir && pyenv local 2.7.14)
+testdir=$topdir/test
+fulldir=$(readlink -f $testdir)
+cd $fulldir
+
+for bytecode in bytecode_2.7/*.pyc ; do
+    echo $bytecode
+    uncompyle2 $bytecode > /dev/null
+    echo ================ $bytecode rc: $? ==============
+done
+
+tmpdir=/tmp/test-2.7
+( cd bytecode_2.7_run &&
+      mkdir $tmpdir || true
+      for bytecode in *.pyc ; do
+	  shortname=$(basename $bytecode .pyc)
+	  echo $bytecode
+	  py_file=${tmpdir}/${shortname}.py
+	  typeset -i rc=0
+	  uncompyle2 $bytecode > $py_file
+	  rc=$?
+	  if (( rc == 0 )); then
+	      python $py_file
+	      rc=$?
+	  fi
+	  echo ================ $bytecode rc: $rc ==============
+      done
+)

appveyor.yml

@@ -47,7 +47,7 @@ install:
 
   # Upgrade to the latest version of pip to avoid it displaying warnings
   # about it being out of date.
-  - "pip install --disable-pip-version-check --user --upgrade pip"
+  - "%PYTHON%\\python.exe -m pip install --disable-pip-version-check --user --upgrade pip"
 
   # Install the build dependencies of the project. If some dependencies contain
   # compiled extensions and are not provided as pre-built wheel packages,

circle.yml

@@ -6,6 +6,7 @@ machine:
 
 dependencies:
     override:
+        - pip install --upgrade setuptools
         - pip install -e .
         - pip install pytest==3.2.5 hypothesis
 test:

pytest/test_fjt.py

@@ -1,8 +1,6 @@
 #!/usr/bin/env python
 from uncompyle6 import PYTHON_VERSION, IS_PYPY
 from uncompyle6.scanner import get_scanner
-from xdis.bytecode import Bytecode
-from array import array
 def bug(state, slotstate):
     if state:
         if slotstate is not None:
@@ -24,16 +22,8 @@ def bug_loop(disassemble, tb=None):
 def test_if_in_for():
     code = bug.__code__
     scan = get_scanner(PYTHON_VERSION)
-    print(PYTHON_VERSION)
     if 2.7 <= PYTHON_VERSION <= 3.0 and not IS_PYPY:
-        n = scan.setup_code(code)
-        bytecode = Bytecode(code, scan.opc)
-        scan.build_lines_data(code, n)
-        scan.insts = list(bytecode)
-        scan.offset2inst_index = {}
-        for i, inst in enumerate(scan.insts):
-            scan.offset2inst_index[inst.offset] = i
-        scan.build_prev_op(n)
+        scan.build_instructions(code)
         fjt = scan.find_jump_targets(False)
 
         ## FIXME: the data below is wrong.
@@ -48,14 +38,7 @@ def test_if_in_for():
         #    {'start': 62, 'end': 63, 'type': 'for-else'}]
 
         code = bug_loop.__code__
-        n = scan.setup_code(code)
-        bytecode = Bytecode(code, scan.opc)
-        scan.build_lines_data(code, n)
-        scan.insts = list(bytecode)
-        scan.build_prev_op(n)
-        scan.offset2inst_index = {}
-        for i, inst in enumerate(scan.insts):
-            scan.offset2inst_index[inst.offset] = i
+        scan.build_instructions(code)
         fjt = scan.find_jump_targets(False)
         assert{64: [42], 67: [42, 42], 42: [16, 41], 19: [6]} == fjt
         assert scan.structs == [
@@ -69,14 +52,7 @@ def test_if_in_for():
             {'start': 48, 'end': 67, 'type': 'while-loop'}]
 
     elif 3.2 < PYTHON_VERSION <= 3.4:
-        bytecode = Bytecode(code, scan.opc)
-        scan.code = array('B', code.co_code)
-        scan.lines = scan.build_lines_data(code)
-        scan.build_prev_op()
-        scan.insts = list(bytecode)
-        scan.offset2inst_index = {}
-        for i, inst in enumerate(scan.insts):
-            scan.offset2inst_index[inst.offset] = i
+        scan.build_instructions(code)
         fjt  = scan.find_jump_targets(False)
         assert {69: [66], 63: [18]} == fjt
         assert scan.structs == \
@@ -86,5 +62,6 @@ def test_if_in_for():
            {'end': 59, 'type': 'for-loop', 'start': 31},
            {'end': 63, 'type': 'for-else', 'start': 62}]
     else:
-        assert True, "FIXME: should note fixed"
+        print("FIXME: should fix for %s" % PYTHON_VERSION)
+        assert True
     return

pytest/test_fstring.py

@@ -1,150 +1,154 @@
 # std
-import os
 # test
-import pytest
-import hypothesis
-from hypothesis import strategies as st
-# uncompyle6
 from uncompyle6 import PYTHON_VERSION, deparse_code
+import pytest
+pytestmark = pytest.mark.skipif(PYTHON_VERSION <= 2.6,
+                                reason='hypothesis needs 2.7 or later')
+if PYTHON_VERSION > 2.6:
+
+    import hypothesis
+    from hypothesis import strategies as st
+
+    # uncompyle6
 
 
-@st.composite
-def expressions(draw):
-    # todo : would be nice to generate expressions using hypothesis however
-    # this is pretty involved so for now just use a corpus of expressions
-    # from which to select.
-    return draw(st.sampled_from((
-        'abc',
-        'len(items)',
-        'x + 1',
-        'lineno',
-        'container',
-        'self.attribute',
-        'self.method()',
-        # These expressions are failing, I think these are control
-        # flow problems rather than problems with FORMAT_VALUE,
-        # however I need to confirm this...
-        #'sorted(items, key=lambda x: x.name)',
-        #'func(*args, **kwargs)',
-        #'text or default',
-        #'43 if life_the_universe and everything else None'
-    )))
+    @st.composite
+    def expressions(draw):
+        # todo : would be nice to generate expressions using hypothesis however
+        # this is pretty involved so for now just use a corpus of expressions
+        # from which to select.
+        return draw(st.sampled_from((
+            'abc',
+            'len(items)',
+            'x + 1',
+            'lineno',
+            'container',
+            'self.attribute',
+            'self.method()',
+            # These expressions are failing, I think these are control
+            # flow problems rather than problems with FORMAT_VALUE,
+            # however I need to confirm this...
+            #'sorted(items, key=lambda x: x.name)',
+            #'func(*args, **kwargs)',
+            #'text or default',
+            #'43 if life_the_universe and everything else None'
+        )))
 
 
-@st.composite
-def format_specifiers(draw):
-    """
-    Generate a valid format specifier using the rules:
+    @st.composite
+    def format_specifiers(draw):
+        """
+        Generate a valid format specifier using the rules:
 
-    format_spec ::=  [[fill]align][sign][#][0][width][,][.precision][type]
-    fill        ::=  <any character>
-    align       ::=  "<" | ">" | "=" | "^"
-    sign        ::=  "+" | "-" | " "
-    width       ::=  integer
-    precision   ::=  integer
-    type        ::=  "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g" | "G" | "n" | "o" | "s" | "x" | "X" | "%"
+        format_spec ::=  [[fill]align][sign][#][0][width][,][.precision][type]
+        fill        ::=  <any character>
+        align       ::=  "<" | ">" | "=" | "^"
+        sign        ::=  "+" | "-" | " "
+        width       ::=  integer
+        precision   ::=  integer
+        type        ::=  "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g" | "G" | "n" | "o" | "s" | "x" | "X" | "%"
 
-    See https://docs.python.org/2/library/string.html
+        See https://docs.python.org/2/library/string.html
 
-    :param draw: Let hypothesis draw from other strategies.
+        :param draw: Let hypothesis draw from other strategies.
 
-    :return: An example format_specifier.
-    """
-    alphabet_strategy = st.characters(min_codepoint=ord('a'), max_codepoint=ord('z'))
-    fill = draw(st.one_of(alphabet_strategy, st.none()))
-    align = draw(st.sampled_from(list('<>=^')))
-    fill_align = (fill + align or '') if fill else ''
+        :return: An example format_specifier.
+        """
+        alphabet_strategy = st.characters(min_codepoint=ord('a'), max_codepoint=ord('z'))
+        fill = draw(st.one_of(alphabet_strategy, st.none()))
+        align = draw(st.sampled_from(list('<>=^')))
+        fill_align = (fill + align or '') if fill else ''
 
-    type_ = draw(st.sampled_from('bcdeEfFgGnosxX%'))
-    can_have_sign = type_ in 'deEfFgGnoxX%'
-    can_have_comma = type_ in 'deEfFgG%'
-    can_have_precision = type_ in 'fFgG'
-    can_have_pound = type_ in 'boxX%'
-    can_have_zero = type_ in 'oxX'
+        type_ = draw(st.sampled_from('bcdeEfFgGnosxX%'))
+        can_have_sign = type_ in 'deEfFgGnoxX%'
+        can_have_comma = type_ in 'deEfFgG%'
+        can_have_precision = type_ in 'fFgG'
+        can_have_pound = type_ in 'boxX%'
+        can_have_zero = type_ in 'oxX'
 
-    sign = draw(st.sampled_from(list('+- ') + [''])) if can_have_sign else ''
-    pound = draw(st.sampled_from(('#', '',))) if can_have_pound else ''
-    zero = draw(st.sampled_from(('0', '',))) if can_have_zero else ''
+        sign = draw(st.sampled_from(list('+- ') + [''])) if can_have_sign else ''
+        pound = draw(st.sampled_from(('#', '',))) if can_have_pound else ''
+        zero = draw(st.sampled_from(('0', '',))) if can_have_zero else ''
 
-    int_strategy = st.integers(min_value=1, max_value=1000)
+        int_strategy = st.integers(min_value=1, max_value=1000)
 
-    width = draw(st.one_of(int_strategy, st.none()))
-    width = str(width) if width is not None else ''
+        width = draw(st.one_of(int_strategy, st.none()))
+        width = str(width) if width is not None else ''
 
-    comma = draw(st.sampled_from((',', '',))) if can_have_comma else ''
-    if can_have_precision:
-        precision = draw(st.one_of(int_strategy, st.none()))
-        precision = '.' + str(precision) if precision else ''
-    else:
-        precision = ''
+        comma = draw(st.sampled_from((',', '',))) if can_have_comma else ''
+        if can_have_precision:
+            precision = draw(st.one_of(int_strategy, st.none()))
+            precision = '.' + str(precision) if precision else ''
+        else:
+            precision = ''
 
-    return ''.join((fill_align, sign, pound, zero, width, comma, precision, type_,))
+        return ''.join((fill_align, sign, pound, zero, width, comma, precision, type_,))
 
 
-@st.composite
-def fstrings(draw):
-    """
-    Generate a valid f-string.
-    See https://www.python.org/dev/peps/pep-0498/#specification
+    @st.composite
+    def fstrings(draw):
+        """
+        Generate a valid f-string.
+        See https://www.python.org/dev/peps/pep-0498/#specification
 
-    :param draw: Let hypothsis draw from other strategies.
+        :param draw: Let hypothsis draw from other strategies.
 
-    :return: A valid f-string.
-    """
-    character_strategy = st.characters(
-        blacklist_characters='\r\n\'\\s{}',
-        min_codepoint=1,
-        max_codepoint=1000,
-    )
-    is_raw = draw(st.booleans())
-    integer_strategy = st.integers(min_value=0, max_value=3)
-    expression_count = draw(integer_strategy)
-    content = []
-    for _ in range(expression_count):
-        expression = draw(expressions())
-        conversion = draw(st.sampled_from(('', '!s', '!r', '!a',)))
-        has_specifier = draw(st.booleans())
-        specifier = ':' + draw(format_specifiers()) if has_specifier else ''
-        content.append('{{{}{}}}'.format(expression, conversion, specifier))
-        content.append(draw(st.text(character_strategy)))
-    content = ''.join(content)
-    return "f{}'{}'".format('r' if is_raw else '', content)
+        :return: A valid f-string.
+        """
+        character_strategy = st.characters(
+            blacklist_characters='\r\n\'\\s{}',
+            min_codepoint=1,
+            max_codepoint=1000,
+        )
+        is_raw = draw(st.booleans())
+        integer_strategy = st.integers(min_value=0, max_value=3)
+        expression_count = draw(integer_strategy)
+        content = []
+        for _ in range(expression_count):
+            expression = draw(expressions())
+            conversion = draw(st.sampled_from(('', '!s', '!r', '!a',)))
+            has_specifier = draw(st.booleans())
+            specifier = ':' + draw(format_specifiers()) if has_specifier else ''
+            content.append('{{{}{}}}'.format(expression, conversion, specifier))
+            content.append(draw(st.text(character_strategy)))
+        content = ''.join(content)
+        return "f{}'{}'".format('r' if is_raw else '', content)
 
 
-@pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
-@hypothesis.given(format_specifiers())
-def test_format_specifiers(format_specifier):
-    """Verify that format_specifiers generates valid specifiers"""
-    try:
-        exec('"{:' + format_specifier + '}".format(0)')
-    except ValueError as e:
-        if 'Unknown format code' not in str(e):
-            raise
+    @pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
+    @hypothesis.given(format_specifiers())
+    def test_format_specifiers(format_specifier):
+        """Verify that format_specifiers generates valid specifiers"""
+        try:
+            exec('"{:' + format_specifier + '}".format(0)')
+        except ValueError as e:
+            if 'Unknown format code' not in str(e):
+                raise
 
 
-def run_test(text):
-    hypothesis.assume(len(text))
-    hypothesis.assume("f'{" in text)
-    expr = text + '\n'
-    code = compile(expr, '<string>', 'single')
-    deparsed = deparse_code(PYTHON_VERSION, code, compile_mode='single')
-    recompiled = compile(deparsed.text, '<string>', 'single')
-    if recompiled != code:
-        assert 'dis(' + deparsed.text.strip('\n') + ')' == 'dis(' + expr.strip('\n') + ')'
+    def run_test(text):
+        hypothesis.assume(len(text))
+        hypothesis.assume("f'{" in text)
+        expr = text + '\n'
+        code = compile(expr, '<string>', 'single')
+        deparsed = deparse_code(PYTHON_VERSION, code, compile_mode='single')
+        recompiled = compile(deparsed.text, '<string>', 'single')
+        if recompiled != code:
+            assert 'dis(' + deparsed.text.strip('\n') + ')' == 'dis(' + expr.strip('\n') + ')'
 
 
-@pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
-@hypothesis.given(fstrings())
-def test_uncompyle_fstring(fstring):
-    """Verify uncompyling fstring bytecode"""
-    run_test(fstring)
+    @pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
+    @hypothesis.given(fstrings())
+    def test_uncompyle_fstring(fstring):
+        """Verify uncompyling fstring bytecode"""
+        run_test(fstring)
 
 
-@pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
-@pytest.mark.parametrize('fstring', [
-    "f'{abc}{abc!s}'",
-    "f'{abc}0'",
-])
-def test_uncompyle_direct(fstring):
-    """useful for debugging"""
-    run_test(fstring)
+    @pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need at least python 3.6')
+    @pytest.mark.parametrize('fstring', [
+        "f'{abc}{abc!s}'",
+        "f'{abc}0'",
+    ])
+    def test_uncompyle_direct(fstring):
+        """useful for debugging"""
+        run_test(fstring)

pytest/test_function_call.py

@@ -1,175 +1,185 @@
-# std
 import string
-# 3rd party
-from hypothesis import given, assume, example, settings, strategies as st
+from uncompyle6 import PYTHON_VERSION
 import pytest
-# uncompyle
-from validate import validate_uncompyle
-from test_fstring import expressions
+pytestmark = pytest.mark.skip(PYTHON_VERSION < 2.7,
+                              reason="need at least Python 2.7")
+
+if PYTHON_VERSION > 2.6:
+    from hypothesis import given, assume, example, settings, strategies as st
+    from validate import validate_uncompyle
+    from test_fstring import expressions
+
+    alpha = st.sampled_from(string.ascii_lowercase)
+    numbers = st.sampled_from(string.digits)
+    alphanum = st.sampled_from(string.ascii_lowercase + string.digits)
 
 
-alpha = st.sampled_from(string.ascii_lowercase)
-numbers = st.sampled_from(string.digits)
-alphanum = st.sampled_from(string.ascii_lowercase + string.digits)
+    @st.composite
+    def function_calls(draw,
+                       min_keyword_args=0, max_keyword_args=5,
+                       min_positional_args=0, max_positional_args=5,
+                       min_star_args=0, max_star_args=1,
+                       min_double_star_args=0, max_double_star_args=1):
+        """
+        Strategy factory for generating function calls.
+
+        :param draw: Callable which draws examples from other strategies.
+
+        :return: The function call text.
+        """
+        st_positional_args = st.lists(
+            alpha,
+            min_size=min_positional_args,
+            max_size=max_positional_args
+        )
+        st_keyword_args = st.lists(
+            alpha,
+            min_size=min_keyword_args,
+            max_size=max_keyword_args
+        )
+        st_star_args = st.lists(
+            alpha,
+            min_size=min_star_args,
+            max_size=max_star_args
+        )
+        st_double_star_args = st.lists(
+            alpha,
+            min_size=min_double_star_args,
+            max_size=max_double_star_args
+        )
+
+        positional_args = draw(st_positional_args)
+        keyword_args = draw(st_keyword_args)
+        st_values = st.lists(
+            expressions(),
+            min_size=len(keyword_args),
+            max_size=len(keyword_args)
+        )
+        keyword_args = [
+            x + '=' + e
+            for x, e in
+            zip(keyword_args, draw(st_values))
+        ]
+        star_args = ['*' + x for x in draw(st_star_args)]
+        double_star_args = ['**' + x for x in draw(st_double_star_args)]
+
+        arguments = positional_args + keyword_args + star_args + double_star_args
+        draw(st.randoms()).shuffle(arguments)
+        arguments = ','.join(arguments)
+
+        function_call = 'fn({arguments})'.format(arguments=arguments)
+        try:
+            # TODO: Figure out the exact rules for ordering of positional, keyword,
+            # star args, double star args and in which versions the various
+            # types of arguments are supported so we don't need to check that the
+            # expression compiles like this.
+            compile(function_call, '<string>', 'single')
+        except:
+            assume(False)
+        return function_call
 
 
-@st.composite
-def function_calls(draw,
-                   min_keyword_args=0, max_keyword_args=5,
-                   min_positional_args=0, max_positional_args=5,
-                   min_star_args=0, max_star_args=1,
-                   min_double_star_args=0, max_double_star_args=1):
-    """
-    Strategy factory for generating function calls.
+    def test_function_no_args():
+        validate_uncompyle("fn()")
 
-    :param draw: Callable which draws examples from other strategies.
+    @pytest.mark.skipif(PYTHON_VERSION < 2.7,
+                        reason="need at least Python 2.7")
+    def isolated_function_calls(which):
+        """
+        Returns a strategy for generating function calls, but isolated to
+        particular types of arguments, for example only positional arguments.
 
-    :return: The function call text.
-    """
-    st_positional_args = st.lists(
-        alpha,
-        min_size=min_positional_args,
-        max_size=max_positional_args
-    )
-    st_keyword_args = st.lists(
-        alpha,
-        min_size=min_keyword_args,
-        max_size=max_keyword_args
-    )
-    st_star_args = st.lists(
-        alpha,
-        min_size=min_star_args,
-        max_size=max_star_args
-    )
-    st_double_star_args = st.lists(
-        alpha,
-        min_size=min_double_star_args,
-        max_size=max_double_star_args
-    )
+        This can help reason about debugging errors in specific types of function
+        calls.
 
-    positional_args = draw(st_positional_args)
-    keyword_args = draw(st_keyword_args)
-    st_values = st.lists(
-        expressions(),
-        min_size=len(keyword_args),
-        max_size=len(keyword_args)
-    )
-    keyword_args = [
-        x + '=' + e
-        for x, e in
-        zip(keyword_args, draw(st_values))
-    ]
-    star_args = ['*' + x for x in draw(st_star_args)]
-    double_star_args = ['**' + x for x in draw(st_double_star_args)]
+        :param which: One of 'keyword', 'positional', 'star', 'double_star'
 
-    arguments = positional_args + keyword_args + star_args + double_star_args
-    draw(st.randoms()).shuffle(arguments)
-    arguments = ','.join(arguments)
-
-    function_call = 'fn({arguments})'.format(arguments=arguments)
-    try:
-        # TODO: Figure out the exact rules for ordering of positional, keyword,
-        # star args, double star args and in which versions the various
-        # types of arguments are supported so we don't need to check that the
-        # expression compiles like this.
-        compile(function_call, '<string>', 'single')
-    except:
-        assume(False)
-    return function_call
+        :return: Strategy for generating an function call isolated to specific
+                 argument types.
+        """
+        kwargs = dict(
+            max_keyword_args=0,
+            max_positional_args=0,
+            max_star_args=0,
+            max_double_star_args=0,
+        )
+        kwargs['_'.join(('min', which, 'args'))] = 1
+        kwargs['_'.join(('max', which, 'args'))] = 5 if 'star' not in which else 1
+        return function_calls(**kwargs)
 
 
-def test_function_no_args():
-    validate_uncompyle("fn()")
+    with settings(max_examples=25):
+
+        @pytest.mark.skipif(PYTHON_VERSION < 2.7,
+                            reason="need at least Python 2.7")
+        @given(isolated_function_calls('positional'))
+        @example("fn(0)")
+        def test_function_positional_only(expr):
+            validate_uncompyle(expr)
+
+        @pytest.mark.skipif(PYTHON_VERSION < 2.7,
+                            reason="need at least Python 2.7")
+        @given(isolated_function_calls('keyword'))
+        @example("fn(a=0)")
+        def test_function_call_keyword_only(expr):
+            validate_uncompyle(expr)
+
+        @pytest.mark.skipif(PYTHON_VERSION < 2.7,
+                            reason="need at least Python 2.7")
+        @given(isolated_function_calls('star'))
+        @example("fn(*items)")
+        def test_function_call_star_only(expr):
+            validate_uncompyle(expr)
+
+        @pytest.mark.skipif(PYTHON_VERSION < 2.7,
+                            reason="need at least Python 2.7")
+        @given(isolated_function_calls('double_star'))
+        @example("fn(**{})")
+        def test_function_call_double_star_only(expr):
+            validate_uncompyle(expr)
 
 
-def isolated_function_calls(which):
-    """
-    Returns a strategy for generating function calls, but isolated to 
-    particular types of arguments, for example only positional arguments.
-
-    This can help reason about debugging errors in specific types of function
-    calls.
-
-    :param which: One of 'keyword', 'positional', 'star', 'double_star'
-
-    :return: Strategy for generating an function call isolated to specific
-             argument types.
-    """
-    kwargs = dict(
-        max_keyword_args=0,
-        max_positional_args=0,
-        max_star_args=0,
-        max_double_star_args=0,
-    )
-    kwargs['_'.join(('min', which, 'args'))] = 1
-    kwargs['_'.join(('max', which, 'args'))] = 5 if 'star' not in which else 1
-    return function_calls(**kwargs)
+    @pytest.mark.xfail()
+    def test_BUILD_CONST_KEY_MAP_BUILD_MAP_UNPACK_WITH_CALL_BUILD_TUPLE_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(w=0,m=0,**v)")
 
 
-with settings(max_examples=25):
-
-    @given(isolated_function_calls('positional'))
-    @example("fn(0)")
-    def test_function_positional_only(expr):
-        validate_uncompyle(expr)
-
-    @given(isolated_function_calls('keyword'))
-    @example("fn(a=0)")
-    def test_function_call_keyword_only(expr):
-        validate_uncompyle(expr)
-
-    @given(isolated_function_calls('star'))
-    @example("fn(*items)")
-    def test_function_call_star_only(expr):
-        validate_uncompyle(expr)
-
-    @given(isolated_function_calls('double_star'))
-    @example("fn(**{})")
-    def test_function_call_double_star_only(expr):
-        validate_uncompyle(expr)
+    @pytest.mark.xfail()
+    def test_BUILD_MAP_BUILD_MAP_UNPACK_WITH_CALL_BUILD_TUPLE_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(a=0,**g)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_CONST_KEY_MAP_BUILD_MAP_UNPACK_WITH_CALL_BUILD_TUPLE_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(w=0,m=0,**v)")
+    @pytest.mark.xfail()
+    def test_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(*g,**j)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_MAP_BUILD_MAP_UNPACK_WITH_CALL_BUILD_TUPLE_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(a=0,**g)")
+    @pytest.mark.xfail()
+    def test_BUILD_MAP_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(*z,u=0)")
 
 
-@pytest.mark.xfail()
-def test_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(*g,**j)")
+    @pytest.mark.xfail()
+    def test_BUILD_TUPLE_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(**a)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_MAP_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(*z,u=0)")
+    @pytest.mark.xfail()
+    def test_BUILD_MAP_BUILD_TUPLE_BUILD_TUPLE_UNPACK_WITH_CALL_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(b,b,b=0,*a)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_TUPLE_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(**a)")
+    @pytest.mark.xfail()
+    def test_BUILD_TUPLE_BUILD_TUPLE_UNPACK_WITH_CALL_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(*c,v)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_MAP_BUILD_TUPLE_BUILD_TUPLE_UNPACK_WITH_CALL_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(b,b,b=0,*a)")
+    @pytest.mark.xfail()
+    def test_BUILD_CONST_KEY_MAP_CALL_FUNCTION_EX():
+        validate_uncompyle("fn(i=0,y=0,*p)")
 
 
-@pytest.mark.xfail()
-def test_BUILD_TUPLE_BUILD_TUPLE_UNPACK_WITH_CALL_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(*c,v)")
-
-
-@pytest.mark.xfail()
-def test_BUILD_CONST_KEY_MAP_CALL_FUNCTION_EX():
-    validate_uncompyle("fn(i=0,y=0,*p)")
-
-
-@pytest.mark.skip(reason='skipping property based test until all individual tests are passing')
-@given(function_calls())
-def test_function_call(function_call):
-    validate_uncompyle(function_call)
+    @pytest.mark.skip(reason='skipping property based test until all individual tests are passing')
+    @given(function_calls())
+    def test_function_call(function_call):
+        validate_uncompyle(function_call)

pytest/test_grammar.py

@@ -18,46 +18,48 @@ def test_grammar():
      right_recursive, dup_rhs) = p.check_sets()
 
     # We have custom rules that create the below
-    expect_lhs = set(['expr1024', 'pos_arg', 'get_iter', 'attribute'])
+    expect_lhs = set(['pos_arg', 'get_iter', 'attribute'])
 
     unused_rhs = set(['list', 'mkfunc',
                       'mklambda',
                       'unpack',])
     expect_right_recursive = set([('designList',
                                    ('store', 'DUP_TOP', 'designList'))])
-    if PYTHON3:
-        expect_lhs.add('load_genexpr')
+
+    if PYTHON_VERSION != 3.7:
+        unused_rhs.add('call')
+
+    if PYTHON_VERSION > 2.6:
         expect_lhs.add('kvlist')
         expect_lhs.add('kv3')
+        unused_rhs.add('dict')
+
+    if PYTHON3:
+        expect_lhs.add('load_genexpr')
 
         unused_rhs = unused_rhs.union(set("""
-        except_pop_except generator_exp classdefdeco2
-        dict
+        except_pop_except generator_exp
         """.split()))
         if PYTHON_VERSION >= 3.0:
             expect_lhs.add("annotate_arg")
             expect_lhs.add("annotate_tuple")
             unused_rhs.add("mkfunc_annotate")
-            unused_rhs.add('call')
-            if PYTHON_VERSION < 3.6:
-                # 3.6 has at least one non-custom call rule
-                # the others don't
-                unused_rhs.add('call')
-                if PYTHON_VERSION == 3.5:
+            unused_rhs.add("dict_comp")
+            unused_rhs.add("classdefdeco1")
+            if PYTHON_VERSION != 3.6:
+                if PYTHON_VERSION in (3.5, 3.7):
                     expect_right_recursive.add((('l_stmts',
-                                                 ('lastl_stmt', 'COME_FROM', 'l_stmts'))))
+                                                 ('lastl_stmt', 'come_froms', 'l_stmts'))))
                     pass
                 pass
             else:
                 expect_right_recursive.add((('l_stmts',
                                              ('lastl_stmt', 'COME_FROM', 'l_stmts'))))
-                # expect_lhs.add('kwargs1')
                 pass
             pass
         pass
     else:
         expect_lhs.add('kwarg')
-        unused_rhs.add('call')
 
     assert expect_lhs == set(lhs)
     assert unused_rhs == set(rhs)
@@ -85,6 +87,8 @@ def test_grammar():
             """.split())
     if 2.6 <= PYTHON_VERSION <= 2.7:
         opcode_set = set(s.opc.opname).union(ignore_set)
+        if PYTHON_VERSION == 2.6:
+            opcode_set.add("THEN")
         check_tokens(tokens, opcode_set)
     elif PYTHON_VERSION == 3.4:
         ignore_set.add('LOAD_CLASSNAME')

pytest/test_single_compile.py

@@ -1,19 +1,22 @@
 import pytest
-from uncompyle6 import PYTHON_VERSION, PYTHON3, deparse_code
+from uncompyle6 import PYTHON_VERSION, deparse_code
+pytestmark = pytest.mark.skip(PYTHON_VERSION < 2.7,
+                              reason="need at least Python 2.7")
 
-def test_single_mode():
-    single_expressions = (
-        'i = 1',
-        'i and (j or k)',
-        'i += 1',
-        'i = j % 4',
-        'i = {}',
-        'i = []',
-        'for i in range(10):\n    i\n',
-        'for i in range(10):\n    for j in range(10):\n        i + j\n',
-        'try:\n    i\nexcept Exception:\n    j\nelse:\n    k\n'
-    )
+if PYTHON_VERSION > 2.6:
+    def test_single_mode():
+        single_expressions = (
+            'i = 1',
+            'i and (j or k)',
+            'i += 1',
+            'i = j % 4',
+            'i = {}',
+            'i = []',
+            'for i in range(10):\n    i\n',
+            'for i in range(10):\n    for j in range(10):\n        i + j\n',
+            'try:\n    i\nexcept Exception:\n    j\nelse:\n    k\n'
+        )
 
-    for expr in single_expressions:
-        code = compile(expr + '\n', '<string>', 'single')
-        assert deparse_code(PYTHON_VERSION, code, compile_mode='single').text == expr + '\n'
+        for expr in single_expressions:
+            code = compile(expr + '\n', '<string>', 'single')
+            assert deparse_code(PYTHON_VERSION, code, compile_mode='single').text == expr + '\n'

pytest/validate.py

@@ -6,16 +6,18 @@ import difflib
 import subprocess
 import tempfile
 import functools
-# compatability
-import six
 # uncompyle6 / xdis
-from uncompyle6 import PYTHON_VERSION, IS_PYPY, deparse_code
+from uncompyle6 import PYTHON_VERSION, PYTHON3, IS_PYPY, deparse_code
 # TODO : I think we can get xdis to support the dis api (python 3 version) by doing something like this there
 from xdis.bytecode import Bytecode
 from xdis.main import get_opcode
 opc = get_opcode(PYTHON_VERSION, IS_PYPY)
 Bytecode = functools.partial(Bytecode, opc=opc)
 
+if PYTHON3:
+    from io import StringIO
+else:
+    from StringIO import StringIO
 
 def _dis_to_text(co):
     return Bytecode(co).dis()

requirements-dev.txt

@@ -1,3 +1,3 @@
-pytest>=3.0.0
+pytest>=3.0.0,<=3.0.1
 flake8
-hypothesis<=3.8.3
+hypothesis<=3.0.0

requirements.txt

@@ -1,2 +1,4 @@
 # Pick up stuff from setup.py
+hypothesis==2.0.0
+pytest
 -e .

setup.py

@@ -4,12 +4,12 @@ import sys
 """Setup script for the 'uncompyle6' distribution."""
 
 SYS_VERSION = sys.version_info[0:2]
-if not ((2, 6) <= SYS_VERSION  <= (3, 7)) or ((3, 0) <= SYS_VERSION <= (3, 1)):
-    mess = "Python Release 2.6 .. 3.7 excluding 3.0 and 3.1 are supported in this code branch."
+if not ((2, 6) <= SYS_VERSION  <= (3, 7)):
+    mess = "Python Release 2.6 .. 3.7 are supported in this code branch."
     if ((2, 4) <= SYS_VERSION <= (2, 7)):
         mess += ("\nFor your Python, version %s, use the python-2.4 code/branch." %
                  sys.version[0:3])
-    elif SYS_VERSION < (2, 4) or ((3, 0) <= SYS_VERSION <= (3, 1)):
+    elif SYS_VERSION < (2, 4):
         mess += ("\nThis package is not supported for Python version %s."
                  % sys.version[0:3])
     print(mess)

test/.gitignore

@@ -0,0 +1 @@
+/nohup.out

test/Makefile

@@ -1,12 +1,13 @@
 PHONY=check clean dist distclean test test-unit test-functional rmChangeLog clean_pyc nosetests \
-      check-bytecode-1.5 check-bytecode-1 check-bytecode-2 check-bytecode-3 \
+      check-bytecode-1  check-bytecode-1.4 check-bytecode-1.5 \
+      check-bytecode-2 check-bytecode-3 \
       check-bytecode-2.2 check-byteocde-2.3 check-bytecode-2.4 \
       check-short check-2.6 check-2.7 check-3.0 check-3.1 check-3.2 check-3.3 \
-      check-3.4 check-3.5 check-5.6 5.6 5.8 \
-      grammar-coverage-2.5 grammar-coverage-2.6 grammarcoverage-2.7 \
-      grammar-coverage-3.1 grammar-coverage-3.2 grammarcoverage-3.3 \
-      grammar-coverage-3.4 grammar-coverage-3.5 grammarcoverage-3.6
-
+      check-3.4 check-3.5 check-3.6 check-3.7 check-5.6 5.6 5.8 \
+      grammar-coverage-2.5 grammar-coverage-2.6 grammar-coverage-2.7 \
+      grammar-coverage-3.1 grammar-coverage-3.2 grammar-coverage-3.3 \
+      grammar-coverage-3.4 grammar-coverage-3.5 grammar-coverage-3.6 \
+      grammar-coverage-3.7
 
 GIT2CL ?= git2cl
 PYTHON ?= python
@@ -21,7 +22,7 @@ COVER_DIR=../tmp/grammar-cover
 # Run short tests
 check-short:
 	@$(PYTHON) -V && PYTHON_VERSION=`$(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2`; \
-	$(MAKE) check-bytecode
+	$(MAKE) check-bytecode-short
 
 # Run all tests
 check:
@@ -37,27 +38,36 @@ check-3.0: check-bytecode
 #: Run working tests from Python 3.1
 check-3.1: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.1-run --verify-run
 
 #: Run working tests from Python 3.2
 check-3.2: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.2-run --verify-run
 
 #: Run working tests from Python 3.3
 check-3.3: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.3-run --verify-run
 
 #: Run working tests from Python 3.4
 check-3.4: check-bytecode check-3.4-ok check-2.7-ok
 	$(PYTHON) test_pythonlib.py --bytecode-3.4 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.4-run --verify-run
 
 #: Run working tests from Python 3.5
 check-3.5: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.5 --weak-verify $(COMPILE)
+	$(PYTHON) test_pythonlib.py --bytecode-3.5-run --verify-run
 
 #: Run working tests from Python 3.6
 check-3.6: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify $(COMPILE)
 
+#: Run working tests from Python 3.7
+check-3.7: check-bytecode
+	$(PYTHON) test_pythonlib.py --bytecode-3.7 --weak-verify $(COMPILE)
+
 # FIXME
 #: this is called when running under pypy3.5-5.8.0 or pypy2-5.6.0
 5.8 5.6:
@@ -67,7 +77,7 @@ check-disasm:
 	$(PYTHON) dis-compare.py
 
 #: Check deparsing bytecode 1.x only
-check-bytecode-1: check-bytecode-1.5
+check-bytecode-1: check-bytecode-1.4 check-bytecode-1.5
 
 #: Check deparsing bytecode 2.x only
 check-bytecode-2:
@@ -81,14 +91,35 @@ check-bytecode-3:
        --bytecode-3.1 --bytecode-3.2 --bytecode-3.3 \
        --bytecode-3.4 --bytecode-3.5 --bytecode-3.6 --bytecode-pypy3.2
 
-#: Check deparsing bytecode that works running Python 2 and Python 3
+#: Check deparsing on selected bytecode 3.x
+check-bytecode-3-short:
+	$(PYTHON) test_pythonlib.py \
+       --bytecode-3.4 --bytecode-3.5 --bytecode-3.6
+
+#: Check deparsing bytecode on all Python 2 and Python 3 versions
 check-bytecode: check-bytecode-3
 	$(PYTHON) test_pythonlib.py \
+	--bytecode-1.3 --bytecode-1.4 --bytecode-1.5 \
+        --bytecode-2.2 --bytecode-2.3 --bytecode-2.4 \
 	--bytecode-2.1 --bytecode-2.2 --bytecode-2.3 --bytecode-2.4 \
         --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 \
         --bytecode-pypy2.7
 
 
+#: Check deparsing bytecode on selected Python 2 and Python 3 versions
+check-bytecode-short: check-bytecode-3-short
+	$(PYTHON) test_pythonlib.py \
+        --bytecode-2.6 --bytecode-2.7 --bytecode-pypy2.7
+
+
+#: Check deparsing bytecode 1.3 only
+check-bytecode-1.3:
+	$(PYTHON) test_pythonlib.py --bytecode-1.3
+
+#: Check deparsing bytecode 1.4 only
+check-bytecode-1.4:
+	$(PYTHON) test_pythonlib.py --bytecode-1.4
+
 #: Check deparsing bytecode 1.5 only
 check-bytecode-1.5:
 	$(PYTHON) test_pythonlib.py --bytecode-1.5
@@ -113,23 +144,29 @@ check-bytecode-2.4:
 check-bytecode-2.5:
 	$(PYTHON) test_pythonlib.py --bytecode-2.5
 
+#: Get grammar coverage for Python 2.4
+grammar-coverage-2.4:
+	-rm $(COVER_DIR)/spark-grammar-24.cover
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.4.cover $(PYTHON) test_pythonlib.py --bytecode-2.4
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.4.cover $(PYTHON) test_pyenvlib.py --2.4.6 --max= 800
+
 #: Get grammar coverage for Python 2.5
 grammar-coverage-2.5:
-	-rm $(COVER_DIR)/spark-grammar-25.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-25.cover $(PYTHON) test_pythonlib.py --bytecode-2.5
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-25.cover $(PYTHON) test_pyenvlib.py --2.5.6
+	-rm $(COVER_DIR)/spark-grammar-2.5.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.5.cover $(PYTHON) test_pythonlib.py --bytecode-2.5
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.5.cover $(PYTHON) test_pyenvlib.py --2.5.6 --max=800
 
 #: Get grammar coverage for Python 2.6
 grammar-coverage-2.6:
-	-rm $(COVER_DIR)/spark-grammar-26.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-26.cover $(PYTHON) test_pythonlib.py --bytecode-2.6
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-26.cover $(PYTHON) test_pyenvlib.py --2.6.9
+	-rm $(COVER_DIR)/spark-grammar-2.6.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.6.cover $(PYTHON) test_pythonlib.py --bytecode-2.6
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.6.cover $(PYTHON) test_pyenvlib.py --2.6.9 --max=800
 
 #: Get grammar coverage for Python 2.7
 grammar-coverage-2.7:
-	-rm $(COVER_DIR)/spark-grammar-27.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-27.cover $(PYTHON) test_pythonlib.py --bytecode-2.7
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-27.cover $(PYTHON) test_pyenvlib.py --2.7.13
+	-rm $(COVER_DIR)/spark-grammar-2.7.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.7.cover $(PYTHON) test_pythonlib.py --bytecode-2.7
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-2.7.cover $(PYTHON) test_pyenvlib.py --2.7.14 --max=600
 
 #: Get grammar coverage for Python 3.0
 grammar-coverage-3.0:
@@ -140,33 +177,39 @@ SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-30.cover $(PYTHON) test_pythonl
 
 #: Get grammar coverage for Python 3.1
 grammar-coverage-3.1:
-	-rm $(COVER_DIR)/spark-grammar-31.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-31.cover $(PYTHON) test_pythonlib.py --bytecode-3.1
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-31.cover $(PYTHON) test_pyenvlib.py --3.1.5
+	-rm $(COVER_DIR)/spark-grammar-3.1.cover
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.1.cover $(PYTHON) test_pythonlib.py --bytecode-3.1
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.1.cover $(PYTHON) test_pyenvlib.py --3.1.5
 
 #: Get grammar coverage for Python 3.2
 grammar-coverage-3.2:
-	-rm $(COVER_DIR)/spark-grammar-32.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-32.cover $(PYTHON) test_pythonlib.py --bytecode-3.2
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-32.cover $(PYTHON) test_pyenvlib.py --3.2.6
+	-rm $(COVER_DIR)/spark-grammar-3.2.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.2.cover $(PYTHON) test_pythonlib.py --bytecode-3.2
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.2.cover $(PYTHON) test_pyenvlib.py --3.2.6
 
 #: Get grammar coverage for Python 3.3
 grammar-coverage-3.3:
-	-rm $(COVER_DIR)/spark-grammar-33.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-33.cover $(PYTHON) test_pythonlib.py --bytecode-3.3
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-33.cover $(PYTHON) test_pyenvlib.py --3.3.6
+	-rm $(COVER_DIR)/spark-grammar-3.3.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.3.cover $(PYTHON) test_pythonlib.py --bytecode-3.3
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.3.cover $(PYTHON) test_pyenvlib.py --3.3.7 --max=800
 
 #: Get grammar coverage for Python 3.4
 grammar-coverage-3.4:
-	-rm $(COVER_DIR)/spark-grammar-34.cover
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-34.cover $(PYTHON) test_pythonlib.py --bytecode-3.4
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-34.cover $(PYTHON) test_pyenvlib.py --3.4.2
+	-rm $(COVER_DIR)/spark-grammar-3.4.cover || true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.4.cover $(PYTHON) test_pythonlib.py --bytecode-3.4
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.4.cover $(PYTHON) test_pyenvlib.py --3.4.8 --max=800
 
 #: Get grammar coverage for Python 3.5
 grammar-coverage-3.5:
-	rm $(COVER_DIR)/spark-grammar-35.cover || /bin/true
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-35.cover $(PYTHON) test_pythonlib.py --bytecode-3.5
-	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-35.cover $(PYTHON) test_pyenvlib.py --3.5.3
+	rm $(COVER_DIR)/spark-grammar-3.5.cover || /bin/true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.5.cover $(PYTHON) test_pythonlib.py --bytecode-3.5
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.5.cover $(PYTHON) test_pyenvlib.py --3.5.5 --max=450
+
+#: Get grammar coverage for Python 3.6
+grammar-coverage-3.6:
+	rm $(COVER_DIR)/spark-grammar-3.6.cover || /bin/true
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.6.cover $(PYTHON) test_pythonlib.py --bytecode-3.6
+	SPARK_PARSER_COVERAGE=$(COVER_DIR)/spark-grammar-3.6.cover $(PYTHON) test_pyenvlib.py --3.6.4 --max=280
 
 #: Check deparsing Python 2.6
 check-bytecode-2.6:
@@ -182,13 +225,20 @@ check-bytecode-2.7:
 check-bytecode-3.0:
 	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify
 
+#: Check deparsing Python 3.0
+check-bytecode-3.0:
+	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify
+        # $(PYTHON) test_pythonlib.py --bytecode-3.0-run --verify-run
+
 #: Check deparsing Python 3.1
 check-bytecode-3.1:
 	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify
+	$(PYTHON) test_pythonlib.py --bytecode-3.1-run --verify-run
 
 #: Check deparsing Python 3.2
 check-bytecode-3.2:
 	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify
+	$(PYTHON) test_pythonlib.py --bytecode-3.2-run --verify-run
 
 #: Check deparsing Python 3.3
 check-bytecode-3.3:
@@ -210,6 +260,10 @@ check-bytecode-3.6:
 	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.6-run --verify-run
 
+#: Check deparsing Python 3.7
+check-bytecode-3.7:
+	$(PYTHON) test_pythonlib.py --bytecode-3.7 --weak-verify
+
 #: short tests for bytecodes only for this version of Python
 check-native-short:
 	$(PYTHON) test_pythonlib.py --bytecode-$(PYTHON_VERSION) --weak-verify $(COMPILE)
@@ -236,7 +290,7 @@ check-3.4-ok:
 2.6:
 
 #: PyPy 5.0.x with Python 2.7 ...
-pypy-2.7 5.0 5.3:
+pypy-2.7 5.0 5.3 6.0:
 	$(PYTHON) test_pythonlib.py --bytecode-pypy2.7 --verify
 
 #: PyPy 2.4.x with Python 3.2 ...

test/bytecode_2.4_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 2.4
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 2.4 interpreter, they will give an error if they
+Furthermore, the programs here are self-checking: when decompiled and
+then run again in a 2.4 interpreter, they are likely to give an error when they
 are miscompiled.

test/bytecode_2.5_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 2.5.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 2.5 interpreter, they will give an error if they
-are miscompiled.
+Furthermore the programs here are self-checking: when decompiled and
+then run again in a 2.5 interpreter, they are likely to give an error
+when they are miscompiled.

test/bytecode_2.6_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 2.6.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 2.6 interpreter, they will give an error if they
-are miscompiled.
+Furthermore the programs here are self-checking: when decompiled and
+then run again in a 2.6 interpreter, they are likely to give an error
+when they are miscompiled.

test/bytecode_2.7_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 2.7.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 2.7 interpreter, they will give an error if they
-are miscompiled.
+Furthermore, the programs here are self-checking: when decompiled and
+then run again in a 2.7 interpreter, they are likely to give an error
+when they are miscompiled.

test/bytecode_3.0_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 3.0.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 3.0 interpreter, they will give an error if they
-are miscompiled.
+Furthermore, the programs here are self-checking: when decompiled and
+then run again in a 3.0 interpreter, they are likely to give an error
+when they are miscompiled.

test/bytecode_3.1_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 3.1.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 3.1 interpreter, they will give an error if they
-are miscompiled.
+Furthrmore, the programs here are self-checking: when decompiled and
+then run again in a 3.1 interpreter, they are likely to give an error
+when they are miscompiled.

test/bytecode_3.2_run/README

@@ -1,5 +1,5 @@
 These are byte-compiled programs compiled by Python 3.2.
 
-Furthrmore the programs here are self-checking: when decompiled and
-then run again in a 3.2 interpreter, they will give an error if they
-are miscompiled.
+Furthermore, the programs here are self-checking: when decompiled and
+then run again in a 3.2 interpreter, they are likely to give an error
+when they are miscompiled.