Get ready for release 2.4.0

disas.py:
 - disassembles *all* code objects found

scanner*.py:
 - no longer need to pass in version numbers; this
   is obtained from the class name
 - no longer pass in opcodes; this is done at
   initialization from the scanner name
 - all Pythoin 3 scanners support native disassembly

.gitignore

@@ -3,9 +3,12 @@
 /.cache
 /.eggs
 /.python-version
+/.tox
+/README
 /__pkginfo__.pyc
 /dist
 /how-to-make-a-release.txt
+/tmp
 /uncompyle6.egg-info
 __pycache__
 build

.travis.yml

@@ -3,11 +3,14 @@ language: python
 sudo: false
 
 python:
+  - '3.5'
+  - '2.7.11'
   - '2.6'
-  - '2.7'
   - '3.4'
+  - '3.2'
 
 install:
+- pip install -r requirements.txt
 - pip install -r requirements-dev.txt
 
 script:

DECOMPYLE-2.4-CHANGELOG.txt

@@ -0,0 +1,76 @@
+This is the changelog from *decompyle*'s release 2.4 passed on by Dan Pascu
+
+
+release 2.4 (Dan Pascu)
+  - Replaced the way code structures are identified by the parser.
+    Previously, the scanner introduced some COME_FROM entries in the
+    dissasembly output to mark all the destinations of jump instructions.
+    Using these COME_FROM labels the parser was then able to identify the
+    code structures (if tests, while loops, etc). Up to python-2.3 this was
+    possible because the code structures were clearly defined and jump
+    targets were always to the same points in a given strcuture making it
+    easy to identify the structure. Python 2.3 however introduced optimized
+    jumps to increase code performance. In the previous version of decompyle
+    (2.3) we used a technique to identify the code structures and then used
+    these structures to determine where the jump targets would have been if
+    not optimized. Using this information we then added COME_FROM labels at
+    the points where they would have been if not optimized, thus emulating
+    the way decompyle worked with versions before python 2.3. However with
+    the introduction of even more optimizations in python 2.4 this technique
+    no longer works. Not only the jump targets are no longer an effective
+    mean for the parser to identify the code structures, but also trying to
+    emulate the old way things were solved when it clearly no longer works
+    is not the right solution. To solve this issue, the code to identify the
+    structures that we had developed in version 2.3, was used to add real
+    start/end points for strcuture identification, instead of the COME_FROM
+    labels. Now these new start/end labels are used by the parser to more
+    precisely identify the structures and the COME_FROM labels were removed
+    completely. The scanner is responsible to identify these code structures
+    and use any knowledge of optimizations that python applies to determine
+    the start/end points of any structure and then mark them with certain
+    keywords that are understood by the parser.
+  - Correctly identify certain `while 1' structures that were not
+    recognized in the previous version.
+  - Added support for new byte code constructs used by python 2.4
+
+release 2.3.2
+  - tidied up copyright and changelog information for releases 2.3 and later
+
+release 2.3.1 (Dan Pascu)
+  - implemented a structure detection technique that fixes problems with
+    optimised jumps in Python >= 2.3. In the previous release (decompyle 2.3),
+    these problems meant that some files were incorrectly decompiled and
+    others could not be decompiled at all. With this new structure detection
+    technique, thorough testing over the standard python libraries suggests
+    that decompyle 2.3.1 can handle everything that decompyle 2.2beta1 could,
+    plus new Python 2.3 bytecodes and constructs.
+
+release 2.3 (Dan Pascu)
+  - support for Python 2.3 added
+  - use the marshal and disassembly code from their respective python
+    versions, so that decompyle can manipulate bytecode independently
+    of the interpreter that runs decompyle itself (for example it can
+    decompile python2.3 bytecode even when running under python2.2)
+
+——————————————————
+
+release 2.2beta1 (hartmut Goebel)
+  - support for Python 1.5 up to Python 2.2
+  - no longer requires to be run with the Python interpreter version
+    which generated the byte-code.
+  - requires Python 2.2
+  - pretty-prints docstrings, hashes, lists and tuples
+  - decompyle is now a script and a package
+  - added emacs mode-hint and tab-width for each file output
+  - enhanced test suite: more test patterns, .pyc/.pyo included
+  - avoids unnecessary 'global' statements
+  - still untested: EXTENDED_ARG
+
+  internal changes:
+  - major code overhoul: splitted into several modules, clean-ups
+  - use a list of valid magics instead of the single one from imp.py
+  - uses copies of 'dis.py' for every supported version. This ensures
+    correct disassemling of the byte-code.
+  - use a single Walker and a single Parser, thus saving time and memory
+  - use augmented assign and 'print >>' internally
+  - optimized 'Walker.engine', the main part of code generation

HISTORY.md

@@ -4,7 +4,8 @@ There have been a number of people who have worked on this. I am awed
 by the amount of work, number of people who have contributed to this,
 and the cleverness in the code.
 
-The below is an annotated history from my reading of the sources cited.
+The below is an annotated history from talking to participants
+involved and my reading of the code and sources cited.
 
 In 1998, John Aycock first wrote a grammar parser in Python,
 eventually called SPARK, that was usable inside a Python program. This
@@ -23,24 +24,25 @@ working on his thesis, John realized SPARK could be used to deparse
 Python bytecode. In the fall of 1999, he started writing the Python
 program, "decompyle", to do this.
 
-This code introduced another clever idea: using table-driven
-semantics routines, using format specifiers.
+To help with control structure deparsing the instruction sequence was
+augmented with pseudo instruction COME_FROM. This code introduced
+another clever idea: using table-driven semantics routines, using
+format specifiers.
 
 The last mention of a release of SPARK from John is around 2002.
 
 In the fall of 2000, Hartmut Goebel
 [took over maintaining the code](https://groups.google.com/forum/#!searchin/comp.lang.python/hartmut$20goebel/comp.lang.python/35s3mp4-nuY/UZALti6ujnQJ). The
-first subsequennt public release announcement that I can find is
+first subsequent public release announcement that I can find is
 ["decompyle - A byte-code-decompiler version 2.2 beta 1"](https://mail.python.org/pipermail/python-announce-list/2002-February/001272.html).
 
 From the CHANGES file found in
 [the tarball for that release](http://old-releases.ubuntu.com/ubuntu/pool/universe/d/decompyle2.2/decompyle2.2_2.2beta1.orig.tar.gz),
 it appears that Hartmut did most of the work to get this code to
-accept the full Python language. He added precidence to the table
+accept the full Python language. He added precedence to the table
 specifiers, support for multiple versions of Python, the
-pretty-printing of docstrings, lists and hashes. He also wrote
-extensive tests and routines to the testing and verification of
-decompiled bytecode.
+pretty-printing of docstrings, lists, and hashes. He also wrote test and verification routines of
+deparsed bytecode, and used this in an extensive set of tests that he also wrote. He could verify against the entire Python library.
 
 decompyle2.2 was packaged for Debian (sarge) by
 [Ben Burton around 2002](https://packages.qa.debian.org/d/decompyle.html). As
@@ -56,27 +58,52 @@ it doesn't look like he's done anything compiler-wise since SPARK). So
 I hope people will use the crazy-compilers service. I wish them the
 success that his good work deserves.
 
-Next we get to
-["uncompyle" and PyPI](https://pypi.python.org/pypi/uncompyle/1.1) and
-the era of git repositories. In contrast to decompyle, this now runs
-only on Python 2.7 although it accepts bytecode back to Python
+Dan Pascu did a bit of work from late 2004 to early 2006 to get this
+code to handle first Python 2.3 and then 2.4 bytecodes. Because of
+jump optimization introduced in the CPython bytecode compiler at that
+time, various JUMP instructions were classifed as going backwards, and
+COME FROM instructions were reintroduced.  See
+RELEASE-2.4-CHANGELOG.txt for more details here. There wasn't a public
+release of RELEASE-2.4 and bytecodes other than Python 2.4 weren't
+supported. Dan says the Python 2.3 version could verify the entire
+python library.
+
+Next we get to ["uncompyle" and
+PyPI](https://pypi.python.org/pypi/uncompyle/1.1) and the era of
+public version control. (Dan's code although not public used
+[darcs](http://darcs.net/) for version control.)
+
+In contrast to _decompyle_, _uncompyle_ at least in its final versions,
+runs only on Python 2.7. However it accepts bytecode back to Python
 2.5. Thomas Grainger is the package owner of this, although Hartmut is
-listed as the author.
+still listed as the author.
 
 The project exists not only on
 [github](https://github.com/gstarnberger/uncompyle) but also on
-[bitbucket](https://bitbucket.org/gstarnberger/uncompyle) where the
-git history goes back to 2009. Somewhere in there the name was changed
-from "decompyle" to "uncompyle".
+[bitbucket](https://bitbucket.org/gstarnberger/uncompyle) and later
+the defunct [google
+code](https://code.google.com/archive/p/unpyc/). The git/svn history
+goes back to 2009. Somewhere in there the name was changed from
+"decompyle" to "unpyc" by Keknehv, and then to "uncompyle" by Guenther Starnberger.
 
 The name Thomas Grainger isn't found in (m)any of the commits in the
-several years of active development. Guenther Starnberger, Keknehv,
-hamled, and Eike Siewertsen are principle committers here.
+several years of active development. First Keknehv worked on this up
+to Python 2.5 or so while acceping Python bytecode back to 2.0 or
+so. Then hamled made a few commits earler on, while Eike Siewertsen
+made a few commits later on. But mostly wibiti, and Guenther
+Starnberger got the code to where uncompyle2 was around 2012.
 
-This project, uncompyle6, however owes its existence to uncompyle2 by
-Myst herie (Mysterie) whose first commit seems to goes back to 2012;
-it is also based on Hartmut's code. I chose this as it seems had been
-the most actively worked on most recently.
+This project, uncompyle6, however owes its existence to the fork of
+uncompyle2 by Myst herie (Mysterie) whose first commit picks up at
+2012. I chose this since it seemed to have been at that time the most
+actively, if briefly, worked on. Also starting around 2012 is Dark
+Fenx's uncompyle3 which I used for inspiration for Python3 support.
+
+I started working on this late 2015, mostly to add fragment support.
+In that, I decided to make this runnable on Python 3.2+ and Python 2.6+
+while, handling Python bytecodes from Python versions 2.5+ and
+3.2+. (I think I could go back further, but I'd consider doing that
+only after code is better cleaned up and supports Python 3 better.)
 
 Over the many years, code styles and Python features have
 changed. However brilliant the code was and still is, it hasn't really
@@ -91,16 +118,20 @@ Hartmut a decade an a half ago:
     NB. This is not a masterpiece of software, but became more like a hack.
     Probably a complete rewrite would be sensefull. hG/2000-12-27
 
-One of the attempts to modernize it and make it available for Python3
-is [the one by Anton Vorobyov (DarkFenX)](https://github.com/DarkFenX/uncompyle3). I've
-followed some of the ideas there in this project.
+This project deparses using an Early-algorithm parse with lots of
+massaging of tokens and the grammar in the scanner
+phase. Early-algorithm parsers are context free and tend to be linear
+if the grammar is LR or left recursive.
 
-Lastly, I should mention [unpyc](https://code.google.com/p/unpyc3/)
-and most especially [pycdc](https://github.com/zrax/pycdc), largely by
-Michael Hansen and Darryl Pogue. If they supported getting source-code
-fragments and I could call it from Python, I'd probably ditch this and
-use that. From what I've seen, the code runs blindingly fast and spans
-all versions of Python.
+Another approach that doesn't use grammars is to do something like
+simulate execution symbolically and build expression trees off of
+stack results. The two important projects that work this way are
+[unpyc3](https://code.google.com/p/unpyc3/) and most especially
+[pycdc](https://github.com/zrax/pycdc) The latter project is largely
+by Michael Hansen and Darryl Pogue. If they supported getting
+source-code fragments and I could call it from Python, I'd probably
+ditch this and use that. From what I've seen, the code runs blindingly
+fast and spans all versions of Python.
 
 Tests for the project have been, or are being, culled from all of the
 projects mentioned.

MANIFEST.in

@@ -1,9 +1,11 @@
 include README.rst
-include HISTORY.md
 include ChangeLog
+include HISTORY.md
+include LICENSE
+include DECOMPYLE-2.4-CHANGELOG.txt
 include __pkginfo__.py
 recursive-include uncompyle6 *.py
 include bin/uncompyle6
 include bin/pydisassemble
-recursive-include test *.py
+recursive-include test *.py *.pyc
 recursive-include pytest *.py

Makefile

@@ -23,10 +23,19 @@ check:
 	@PYTHON_VERSION=`$(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2`; \
 	$(MAKE) check-$$PYTHON_VERSION
 
+# Run all quick tests
+check-short: pytest
+	$(MAKE) -C test check-short
+
 #: Tests for Python 2.7, 3.3 and 3.4
 check-2.7 check-3.3 check-3.4: pytest
 	$(MAKE) -C test $@
 
+#: Tests for Python 3.2 and 3.5 - pytest doesn't work here
+# Or rather 3.5 doesn't work not on Travis
+check-3.2 check-3.5:
+	$(MAKE) -C test $@
+
 #:Tests for Python 2.6 (doesn't have pytest)
 check-2.6:
 	$(MAKE) -C test $@
@@ -40,9 +49,9 @@ clean: clean_pyc
 	$(PYTHON) ./setup.py $@
 	(cd test && $(MAKE) clean)
 
-#: Create source (tarball) and binary (egg) distribution
+#: Create source (tarball) and wheel distribution
 dist:
-	$(PYTHON) ./setup.py sdist bdist_egg
+	$(PYTHON) ./setup.py sdist bdist_wheel
 
 #: Remove .pyc files
 clean_pyc:
@@ -56,6 +65,11 @@ sdist:
 #: Style check. Set env var LINT to pyflakes, flake, or flake8
 lint: flake8
 
+# Check StructuredText long description formatting
+check-rst:
+	$(PYTHON) setup.py --long-description | rst2html.py > python3-trepan.html
+
+#: Lint program
 flake8:
 	$(LINT) uncompyle6
 
@@ -64,6 +78,11 @@ bdist_egg:
 	$(PYTHON) ./setup.py bdist_egg
 
 
+#: Create binary wheel distribution
+bdist_wheel:
+	$(PYTHON) ./setup.py bdist_wheel
+
+
 # It is too much work to figure out how to add a new command to distutils
 # to do the following. I'm sure distutils will someday get there.
 DISTCLEAN_FILES = build dist *.pyc

NEWS

@@ -1,3 +1,86 @@
+uncompyle6 2.4.0 2016-05-18
+
+- Many Python 3 bugs fixed:
+  * Python 3.2 to 3.5 libaries largely
+    uncompyle and most verify
+- pydisassembler:
+  * disassembles all code objects in a file
+  * can select showing bytecode before
+    or after uncompyle mangling, option -U
+- DRY scanner code (but more is desired)
+- Some code cleanup (but more is desired)
+- Misc Bugs fixed:
+  * handle complex number unmarshaling
+  * Running on Python 2 to works on Python 3.5 bytecodes now
+
+uncompyle6 2.3.5 and 2.3.6 2016-05-14
+
+- Python 2 class decorator fix (thanks to Tey)
+- Fix fragment parsing bugs
+- Fix some Python 3 parsing bugs:
+  * Handling single in * parameter
+  * "while True"
+  * escape from for inside if
+  * yield expressions
+- Correct history based on info from Dan Pascu
+- Fix up pip packaging, ugh.
+
+uncompyle6 2.3.4 2016-05-5
+
+- More Python 3.5 parsing bugs addressed
+- decompiling Python 3.5 from other Python versions works
+- test from Python 3.2
+- remove "__module__ = __name__" in 3.0 <= Python 3.2
+
+uncompyle6 2.3.3 2016-05-3
+
+- Fix bug in running uncompyle6 script on Python 3
+- Speed up performance on deparsing long lists by grouping in chunks of 32 and 256 items
+- DRY Python expressions between Python 2 and 3
+
+uncompyle6 2.3.2 2016-05-1
+
+- Add --version option standalone scripts
+- Correct License information in package
+- expose fns uncompyle_file, load_file, and load_module
+- Start to DRY Python2 and Python3 grammars Separate out 3.2, and 3.5+
+  specific grammar code
+- Fix bug in 3.5+ constant map parsing
+
+uncompyle6 2.3.0, 2.3.1 2016-04-30
+
+- Require spark_parser  >= 1.1.0
+
+uncompyle6 2.2.0 2016-04-30
+
+- Spark is no longer here but pulled separate package spark_parse
+- Python 3 parsing fixes
+- More tests
+
+uncompyle6 2.2.0 2016-04-02
+
+- Support single-mode (in addtion to exec-mode) compilation
+- Start to DRY Python 2 and Python 3 grammars
+- Fix bug in if else ternary  construct
+- Fix bug in uncomplye6 -d and -r options (via lelicopter)
+
+
+uncompyle6 2.1.3 2016-01-02
+
+- Limited support for decompiling Python 3.5
+- Improve Python 3 class deparsing
+- Handle MAKE_CLOSURE opcode
+- Start to DRY opcode code.
+- increase test coverage
+- fix misc small bugs and some improvements
+
+uncompyle6 2.1.2 2015-12-31
+
+- Fix cross-version Marshal loading
+- Handle Python 3.3 . dotted class names
+- Limited 3.5 support: allows deparsing other versions
+- Refactor code more, misc bug fixes
+
 uncompyle6 2.1.1 2015-12-27
 
 - packaging issues

README.rst

@@ -3,28 +3,33 @@
 uncompyle6
 ==========
 
-A native Python Byte-code Disassembler, Decompiler, Fragment Decompiler
-and byte-code library
+A native Python bytecode Disassembler, Decompiler, Fragment Decompiler
+and bytecode library. Follows in the tradition of decompyle, uncompyle, and uncompyle2.
 
 
 Introduction
 ------------
 
-*uncompyle6* translates Python byte-code back into equivalent Python
-source code. It accepts byte-codes from Python version 2.5 to 3.4 or
-so and has been tested on Python running versions 2.6, 2.7, 3.3 and
-3.4.
+*uncompyle6* translates Python bytecode back into equivalent Python
+source code. It accepts bytecodes from Python version 2.5 to 3.5 or
+so. The code requires Python 2.6 or later and has been tested on Python
+running versions 2.6, 2.7, 3.2, 3.3, 3.4 and 3.5.
 
 Why this?
 ---------
 
-What makes this different other CPython byte-code decompilers?  Its
+There were a number of decompyle, uncompile, uncompyle2, uncompyle3
+forks around. All of them come basically from the same code base, and
+almost all of them not maintained very well. This code pulls these together
+and addresses a number of open issues in those.
+
+What makes this different from other CPython bytecode decompilers?  Its
 ability to deparse just fragments and give source-code information
 around a given bytecode offset.
 
-I using this to deparse fragments of code inside my trepan_
+I use this to deparse fragments of code inside my trepan_
 debuggers_. For that, I need to record text fragments for all
-byte-code offsets (of interest). This purpose although largely
+bytecode offsets (of interest). This purpose although largely
 compatible with the original intention is yet a little bit different.
 See this_ for more information.
 
@@ -37,7 +42,7 @@ information.
 Other parts of the library can be used inside Python for various
 bytecode-related tasks. For example you can read in bytecode,
 i.e. perform a version-independent `marshal.loads()`, and disassemble
-the bytecode using version of Python different from the one used to
+the bytecode using a version of Python different from the one used to
 compile the bytecode.
 
 
@@ -48,6 +53,8 @@ This uses setup.py, so it follows the standard Python routine:
 
 ::
 
+    pip install -r requirements.txt
+    pip install -r requirements-dev.txt
     python setup.py install # may need sudo
     # or if you have pyenv:
     python setup.py develop
@@ -77,31 +84,36 @@ Run
 ::
 
      ./bin/uncompyle6 -h
-     ./bin/pydisassemble -y
+     ./bin/pydisassemble -h
 
-for usage help
+for usage help.
 
 
 Known Bugs/Restrictions
 -----------------------
 
-Python 2 deparsing is probably as solid as the various versions of
-uncompyle2.  Python 3 deparsing is not as solid.  Using Python 2 to
-deparse Python 3 has severe limitations, due to byte code format
-differences and the current inablity to retrieve code object fields across
-different Python versions. (I envy the pycdc C++ code which doesn't have such
-problems because they live totally outside of Python.)
+Python 2 deparsing decompiles about the first 140 or so of the Python
+2.7.10 and 2.7.11 standard library files and all but less that 10%
+verify. So as such, it is probably a little better than uncompyle2.
+Other Python 2 versions do worse.
+
+Python 3 deparsing before 3.5 is okay, but even there, more work is needed to
+decompile all of its library. Python 3.5 is missing some of new
+opcodes and idioms added, but it still often works.
+
+There is lots to do, so please dig in and help.
 
 See Also
 --------
 
-* https://github.com/zrax/pycdc
-* https://github.com/Mysterie/uncompyle2
-* https://github.com/DarkFenX/uncompyle3
-* https://code.google.com/p/unpyc3/
+* https://github.com/zrax/pycdc : supports all versions of Python and is written in C++
+* https://code.google.com/archive/p/unpyc3/ : supports Python 3.2 only
+
+The above projects use a different decompiling technique what is used here.
 
 The HISTORY file.
 
+.. |downloads| image:: https://img.shields.io/pypi/dd/uncompyle6.svg
 .. _trepan: https://pypi.python.org/pypi/trepan
 .. _debuggers: https://pypi.python.org/pypi/trepan3k
 .. _remake: https://bashdb.sf.net/remake

__pkginfo__.py

@@ -9,13 +9,20 @@
 
 # Things that change more often go here.
 copyright   = """
-Copyright (C) 2015 Rocky Bernstein <rb@dustyfeet.com>.
+Copyright (C) 2015, 2016 Rocky Bernstein <rb@dustyfeet.com>.
 """
 
-classifiers =  ['Development Status :: 3 - Alpha',
+classifiers =  ['Development Status :: 4 - Beta',
                 'Intended Audience :: Developers',
                 'Operating System :: OS Independent',
                 'Programming Language :: Python',
+                'Programming Language :: Python :: 2',
+                'Programming Language :: Python :: 2.6',
+                'Programming Language :: Python :: 2.7',
+                'Programming Language :: Python :: 3',
+                'Programming Language :: Python :: 3.3',
+                'Programming Language :: Python :: 3.4',
+                'Programming Language :: Python :: 3.5',
                 'Topic :: Software Development :: Debuggers',
                 'Topic :: Software Development :: Libraries :: Python Modules',
                 ]
@@ -23,31 +30,34 @@ classifiers =  ['Development Status :: 3 - Alpha',
 # The rest in alphabetic order
 author             = "Rocky Bernstein, Hartmut Goebel, John Aycock, and others"
 author_email       = "rb@dustyfeet.com"
+entry_points={
+    'console_scripts': [
+        'uncompyle6=uncompyle6.bin.uncompile:main_bin',
+        'pydisassemble=uncompyle6.bin.pydisassemble:main',
+    ]}
 ftp_url            = None
-# license            = 'BSDish'
+install_requires   = ['spark-parser >= 1.2.1']
+license            = 'MIT'
 mailing_list       = 'python-debugger@googlegroups.com'
 modname            = 'uncompyle6'
-packages           = ['uncompyle6', 'uncompyle6.opcodes', 'uncompyle6.semantics', 'uncompyle6.scanners', 'uncompyle6.parsers']
 py_modules         = None
 short_desc         = 'Python byte-code disassembler and source-code converter'
-scripts            = ['bin/uncompyle6', 'bin/pydisassemble']
-
-import os.path
-
-
-def get_srcdir():
-    filename = os.path.normcase(os.path.dirname(os.path.abspath(__file__)))
-    return os.path.realpath(filename)
-
-ns = {}
-version            = '2.1.1'
 web                = 'https://github.com/rocky/python-uncompyle6/'
 
 # tracebacks in zip files are funky and not debuggable
 zip_safe = True
 
 
-def read(*rnames):
-    return open(os.path.join(os.path.dirname(__file__), *rnames)).read()
+import os.path
+def get_srcdir():
+    filename = os.path.normcase(os.path.dirname(os.path.abspath(__file__)))
+    return os.path.realpath(filename)
 
+srcdir = get_srcdir()
+
+def read(*rnames):
+    return open(os.path.join(srcdir, *rnames)).read()
+
+# Get info from files; set: long_description and VERSION
 long_description   = ( read("README.rst") + '\n' )
+exec(read('uncompyle6/version.py'))

bin/pydisassemble

@@ -1,77 +1,3 @@
 #!/usr/bin/env python
-# Mode: -*- python -*-
-#
-# Copyright (c) 2015 by Rocky Bernstein <rb@dustyfeet.com>
-#
-from __future__ import print_function
-import sys, os, getopt
-
-program =  os.path.basename(__file__)
-
-__doc__ = """
-Usage: %s [OPTIONS]... FILE
-
-Examples:
-  %s      foo.pyc
-  %s      foo.py
-  %s -o foo.pydis foo.pyc
-  %s -o /tmp foo.pyc
-
-Options:
-  -o <path>     output decompiled files to this path:
-                if multiple input files are decompiled, the common prefix
-                is stripped from these names and the remainder appended to
-                <path>
-  --help        show this message
-
-""" % ((program,) * 5)
-
-
-Usage_short = \
-"%s [--help] [--verify] [--showasm] [--showast] [-o <path>] FILE|DIR..." % program
-
-from uncompyle6 import check_python_version
-from uncompyle6.disas import disassemble_files
-
-check_python_version(program)
-
-outfile = '-'
-out_base = None
-
-
-try:
-    opts, files = getopt.getopt(sys.argv[1:], 'ho:', ['help'])
-except getopt.GetoptError as e:
-    print('%s: %s' % (os.path.basename(sys.argv[0]), e),  file=sys.stderr)
-    sys.exit(-1)
-
-for opt, val in opts:
-    if opt in ('-h', '--help'):
-        print(__doc__)
-        sys.exit(0)
-    elif opt == '-o':
-        outfile = val
-    else:
-        print(opt)
-        print(Usage_short)
-        sys.exit(1)
-
-# argl, commonprefix works on strings, not on path parts,
-# thus we must handle the case with files in 'some/classes'
-# and 'some/cmds'
-src_base = os.path.commonprefix(files)
-if src_base[-1:] != os.sep:
-    src_base = os.path.dirname(src_base)
-if src_base:
-    sb_len = len( os.path.join(src_base, '') )
-    files = [f[sb_len:] for f in files]
-    del sb_len
-
-if outfile == '-':
-    outfile = None # use stdout
-elif outfile and os.path.isdir(outfile):
-    out_base = outfile; outfile = None
-elif outfile and len(files) > 1:
-    out_base = outfile; outfile = None
-
-disassemble_files(src_base, out_base, files, outfile)
+from uncompyle6.bin.pydisassemble import main
+main()

bin/uncompyle6

@@ -1,213 +1,3 @@
 #!/usr/bin/env python
-# Mode: -*- python -*-
-#
-# Copyright (c) 2000-2002 by hartmut Goebel <h.goebel@crazy-compilers.com>
-# Copyright (c) 2015 by Rocky Bernstein
-
-"""
-Usage: uncompyle6 [OPTIONS]... [ FILE | DIR]...
-
-Examples:
-  uncompyle6      foo.pyc bar.pyc       # decompile foo.pyc, bar.pyc to stdout
-  uncompyle6 -o . foo.pyc bar.pyc       # decompile to ./foo.pyc_dis and ./bar.pyc_dis
-  uncompyle6 -o /tmp /usr/lib/python1.5 # decompile whole library
-
-Options:
-  -o <path>     output decompiled files to this path:
-                if multiple input files are decompiled, the common prefix
-                is stripped from these names and the remainder appended to
-                <path>
-                  uncompyle6 -o /tmp bla/fasel.pyc bla/foo.pyc
-                    -> /tmp/fasel.pyc_dis, /tmp/foo.pyc_dis
-                  uncompyle6 -o /tmp bla/fasel.pyc bar/foo.pyc
-                    -> /tmp/bla/fasel.pyc_dis, /tmp/bar/foo.pyc_dis
-                  uncompyle6 -o /tmp /usr/lib/python1.5
-                    -> /tmp/smtplib.pyc_dis ... /tmp/lib-tk/FixTk.pyc_dis
-  -c <file>     attempts a disassembly after compiling <file>
-  -d            print timestamps
-  -p <integer>  use <integer> number of processes
-  -r            recurse directories looking for .pyc and .pyo files
-  --verify      compare generated source with input byte-code
-                (requires -o)
-  --help        show this message
-
-Debugging Options:
-  --asm     -a  include byte-code         (disables --verify)
-  --grammar -g  show matching grammar
-  --treee   -t  include syntax tree       (disables --verify)
-
-Extensions of generated files:
-  '.pyc_dis' '.pyo_dis'   successfully decompiled (and verified if --verify)
-    + '_unverified'       successfully decompile but --verify failed
-    + '_failed'           decompile failed (contact author for enhancement)
-"""
-
-from __future__ import print_function
-import sys, os, getopt, time
-
-program =  os.path.basename(__file__)
-
-from uncompyle6 import verify, check_python_version
-from uncompyle6.main import main, status_msg
-
-def usage():
-    print("""usage:
-   %s [--help] [--verify] [--asm] [--tree] [--grammar] [-o <path>] FILE|DIR...
-"""  % program)
-    sys.exit(1)
-
-
-check_python_version(program)
-
-showasm = showast = do_verify = recurse_dirs = False
-numproc = 0
-outfile = '-'
-out_base = None
-codes = []
-timestamp = False
-timestampfmt = "# %Y.%m.%d %H:%M:%S %Z"
-
-try:
-    opts, files = getopt.getopt(sys.argv[1:], 'hagtdro:c:p:',
-                                'help asm grammar recurse timestamp tree verify '
-                                'showgrammar'.split(' '))
-except getopt.GetoptError as e:
-    print('%s: %s' % (os.path.basename(sys.argv[0]), e),  file=sys.stderr)
-    sys.exit(-1)
-
-options = {}
-for opt, val in opts:
-    if opt in ('-h', '--help'):
-        print(__doc__)
-        sys.exit(0)
-    elif opt == '--verify':
-        options['do_verify'] = True
-    elif opt in ('--asm', '-a'):
-        options['showasm'] = True
-        options['do_verify'] = False
-    elif opt in ('--tree', '-t'):
-        options['showast'] = True
-        options['do_verify'] = False
-    elif opt in ('--grammar', '-g'):
-        options['showgrammar'] = True
-    elif opt == '-o':
-        outfile = val
-    elif opt == ('--timestamp', '-d'):
-        timestamp = True
-    elif opt == '-c':
-        codes.append(val)
-    elif opt == '-p':
-        numproc = int(val)
-    elif opt == ('--recurse', '-r'):
-        recurse_dirs = True
-    else:
-        print(opt, file=sys.stderr)
-        usage()
-
-# expand directory if specified
-if recurse_dirs:
-    expanded_files = []
-    for f in files:
-        if os.path.isdir(f):
-            for root, _, dir_files in os.walk(f):
-                for df in dir_files:
-                    if df.endswith('.pyc') or df.endswith('.pyo'):
-                        expanded_files.append(os.path.join(root, df))
-    files = expanded_files
-
-# argl, commonprefix works on strings, not on path parts,
-# thus we must handle the case with files in 'some/classes'
-# and 'some/cmds'
-src_base = os.path.commonprefix(files)
-if src_base[-1:] != os.sep:
-    src_base = os.path.dirname(src_base)
-if src_base:
-    sb_len = len( os.path.join(src_base, '') )
-    files = [f[sb_len:] for f in files]
-    del sb_len
-
-if not files:
-    print("No files given", file=sys.stderr)
-    usage()
-
-
-if outfile == '-':
-    outfile = None # use stdout
-elif outfile and os.path.isdir(outfile):
-    out_base = outfile; outfile = None
-elif outfile and len(files) > 1:
-    out_base = outfile; outfile = None
-
-if timestamp:
-    print(time.strftime(timestampfmt))
-
-if numproc <= 1:
-    try:
-        result = main(src_base, out_base, files, codes, outfile,
-                      **options)
-        if len(files) > 1:
-            mess = status_msg(do_verify, *result)
-            print('# ' + mess)
-            pass
-    except (KeyboardInterrupt):
-        pass
-    except verify.VerifyCmpError:
-        raise
-else:
-    from multiprocessing import Process, Queue
-
-    try:
-        from Queue import Empty
-    except ImportError:
-        from Queue import Empty
-
-    fqueue = Queue(len(files)+numproc)
-    for f in files:
-        fqueue.put(f)
-    for i in range(numproc):
-        fqueue.put(None)
-
-    rqueue = Queue(numproc)
-
-    def process_func():
-        try:
-            (tot_files, okay_files, failed_files, verify_failed_files) = (0, 0, 0, 0)
-            while 1:
-                f = fqueue.get()
-                if f is None:
-                    break
-                (t, o, f, v) = \
-                  main(src_base, out_base, [f], codes, outfile, **options)
-                tot_files += t
-                okay_files += o
-                failed_files += f
-                verify_failed_files += v
-        except (Empty, KeyboardInterrupt):
-            pass
-        rqueue.put((tot_files, okay_files, failed_files, verify_failed_files))
-        rqueue.close()
-
-    try:
-        procs = [Process(target=process_func) for i in range(numproc)]
-        for p in procs:
-            p.start()
-        for p in procs:
-            p.join()
-        try:
-            (tot_files, okay_files, failed_files, verify_failed_files) = (0, 0, 0, 0)
-            while True:
-                (t, o, f, v) = rqueue.get(False)
-                tot_files += t
-                okay_files += o
-                failed_files += f
-                verify_failed_files += v
-        except Empty:
-            pass
-        print('# decompiled %i files: %i okay, %i failed, %i verify failed' %
-              (tot_files, okay_files, failed_files, verify_failed_files))
-    except (KeyboardInterrupt, OSError):
-        pass
-
-
-if timestamp:
-    print(time.strftime(timestampfmt))
+from uncompyle6.bin.uncompile import main_bin
+main_bin()

circle.yml

@@ -6,7 +6,8 @@ machine:
 
 dependencies:
     override:
-        - pip install -r test-requirements.txt
+        - pip install -r requirements.txt
+        - pip install -r requirements-dev.txt
 test:
     override:
         - python ./setup.py develop && make check-2.7

pytest/test_fjt.py

@@ -0,0 +1,41 @@
+#!/usr/bin/env python
+from uncompyle6 import PYTHON_VERSION
+from uncompyle6.scanner import get_scanner
+from array import array
+def bug(state, slotstate):
+    if state:
+        if slotstate is not None:
+            for key, value in slotstate.items():
+                setattr(state, key, 2)
+
+def test_if_in_for():
+    code = bug.__code__
+    scan = get_scanner(PYTHON_VERSION)
+    print(PYTHON_VERSION)
+    if 2.7 <= PYTHON_VERSION <= 3.0:
+        n = scan.setup_code(code)
+        scan.build_lines_data(code, n)
+        scan.build_prev_op(n)
+        fjt = scan.find_jump_targets()
+        assert {15: [3], 69: [66], 63: [18]} == fjt
+        print(scan.structs)
+        assert scan.structs == \
+          [{'start': 0, 'end': 72, 'type': 'root'},
+           {'start': 18, 'end': 66, 'type': 'if-then'},
+           {'start': 31, 'end': 59, 'type': 'for-loop'},
+           {'start': 62, 'end': 63, 'type': 'for-else'}]
+    elif 3.2 < PYTHON_VERSION <= 3.4:
+        scan.code = array('B', code.co_code)
+        scan.build_lines_data(code)
+        scan.build_prev_op()
+        fjt  = scan.find_jump_targets()
+        assert {69: [66], 63: [18]} == fjt
+        assert scan.structs == \
+          [{'end': 72, 'type': 'root', 'start': 0},
+           {'end': 66, 'type': 'if-then', 'start': 6},
+           {'end': 63, 'type': 'if-then', 'start': 18},
+           {'end': 59, 'type': 'for-loop', 'start': 31},
+           {'end': 63, 'type': 'for-else', 'start': 62}]
+    else:
+        assert True, "FIXME: should note fixed"
+    return

pytest/test_load.py

@@ -1,10 +1,13 @@
-import sys
+import os, sys
 from uncompyle6.load import load_file, check_object_path, load_module
 
 def test_load():
     """Basic test of load_file, check_object_path and load_module"""
     co = load_file(__file__)
     obj_path = check_object_path(__file__)
-    version, timestamp, magic_int, co2 = load_module(obj_path)
-    assert sys.version[0:3] == str(version)
-    assert co == co2
+    if os.path.exists(obj_path):
+        version, timestamp, magic_int, co2 = load_module(obj_path)
+        assert sys.version[0:3] == str(version)
+        assert co == co2
+    else:
+        assert True, "Skipped because we can't find %s" % obj_path

pytest/test_marsh.py

@@ -0,0 +1,20 @@
+#!/usr/bin/env python
+
+import os.path
+from uncompyle6.load import load_module
+
+def get_srcdir():
+    filename = os.path.normcase(os.path.dirname(os.path.abspath(__file__)))
+    return os.path.realpath(filename)
+
+srcdir = get_srcdir()
+
+def test_load_module():
+    """Tests uncompile6.load.load_module"""
+    # We deliberately pick a bytecode that we aren't likely to be running against
+    mod_file = os.path.join(get_srcdir(), '..', 'test', 'bytecode_2.5',
+                        '02_complex.pyc')
+
+    version, timestamp, magic_int, co = load_module(mod_file)
+    assert version == 2.5, "Should have picked up Python version properly"
+    assert co.co_consts == (5j, None), "Code should have a complex constant"

pytest/test_single_compile.py

@@ -0,0 +1,21 @@
+import pytest
+from uncompyle6 import PYTHON_VERSION, PYTHON3, deparse_code
+
+def test_single_mode():
+    single_expressions = (
+        'i = 1',
+        'i and (j or k)',
+        'i += 1',
+        'i = j % 4',
+        'i = {}',
+        'i = []',
+        'while i < 1 or stop:\n    i\n',
+        'while i < 1 or stop:\n    print%s\n' % ('(i)' if PYTHON3 else ' i'),
+        'for i in range(10):\n    i\n',
+        'for i in range(10):\n    for j in range(10):\n        i + j\n',
+        'try:\n    i\nexcept Exception:\n    j\nelse:\n    k\n'
+    )
+
+    for expr in single_expressions:
+        code = compile(expr + '\n', '<string>', 'single')
+        assert deparse_code(PYTHON_VERSION, code, compile_mode='single').text == expr + '\n'

pytest/testdata/if-2.7.right

@@ -1,13 +1,11 @@
 # Python 2.7
 # Embedded file name: simple_source/branching/05_if.py
 
-   6       0	LOAD_NAME         'True'
-           3	POP_JUMP_IF_FALSE '15'
-
-   7       6	LOAD_NAME         'False'
-           9	STORE_NAME        'b'
-          12	JUMP_FORWARD      '15'
-        15_0	COME_FROM         '12'
-          15	LOAD_CONST        ''
-          18	RETURN_VALUE      ''
+   6      0	LOAD_NAME             0  'True'
+          3	POP_JUMP_IF_FALSE    15  '15'
 
+   7      6	LOAD_NAME             1  'False'
+          9	STORE_NAME            2  'b'
+         12	JUMP_FORWARD          0  '15'
+         15	LOAD_CONST            0  ''
+         18	RETURN_VALUE             ''

pytest/testdata/ifelse-2.7.right

@@ -1,16 +1,14 @@
 # Python 2.7
 # Embedded file name: simple_source/branching/05_ifelse.py
 
-   3       0	LOAD_NAME         'True'
-           3	POP_JUMP_IF_FALSE '15'
+   3      0	LOAD_NAME             0  'True'
+          3	POP_JUMP_IF_FALSE    15  '15'
 
-   4       6	LOAD_CONST        1
-           9	STORE_NAME        'b'
-          12	JUMP_FORWARD      '21'
-
-   6      15	LOAD_CONST        2
-          18	STORE_NAME        'd'
-        21_0	COME_FROM         '12'
-          21	LOAD_CONST        ''
-          24	RETURN_VALUE      ''
+   4      6	LOAD_CONST            0  1
+          9	STORE_NAME            1  'b'
+         12	JUMP_FORWARD          6  '21'
 
+   6     15	LOAD_CONST            1  2
+         18	STORE_NAME            2  'd'
+         21	LOAD_CONST            2  ''
+         24	RETURN_VALUE             ''

requirements.txt

@@ -0,0 +1 @@
+spark-parser >= 1.2.1

setup.cfg

@@ -6,3 +6,6 @@ doc_files = README
 #		USAGE.txt
 #		doc/
 #		examples/
+
+[bdist_wheel]
+universal=1

setup.py

@@ -1,39 +1,29 @@
-#! python
+#!/usr/bin/env python
 
 """Setup script for the 'uncompyle6' distribution."""
 
-from distutils.core import setup, Extension
-
-# Get the package information used in setup().
-# from __pkginfo__ import \
-#     author,           author_email,       classifiers,                    \
-#     install_requires, license,            long_description,               \
-#     modname,          packages,           py_modules,   \
-#     short_desc,       version,            web,              zip_safe
-
 from __pkginfo__ import \
-    author,           author_email,                                  \
-    long_description,                                                \
-    modname,          packages,           py_modules,       scripts, \
-    short_desc,       version,            web,              zip_safe
-
-__import__('pkg_resources')
-from setuptools import setup
+    author,           author_email,       install_requires,          \
+    license,          long_description,   classifiers,               \
+    entry_points,     modname,            py_modules,                \
+    short_desc,       VERSION,            web,                       \
+    zip_safe
 
+from setuptools import setup, find_packages
 setup(
        author             = author,
        author_email       = author_email,
-       # classifiers        = classifiers,
+       classifiers        = classifiers,
        description        = short_desc,
-       # install_requires   = install_requires,
-       # license            = license,
+       entry_points       = entry_points,
+       install_requires   = install_requires,
+       license            = license,
        long_description   = long_description,
-       py_modules         = py_modules,
        name               = modname,
-       packages           = packages,
+       packages           = find_packages(),
+       py_modules         = py_modules,
        test_suite         = 'nose.collector',
        url                = web,
        setup_requires     = ['nose>=1.0'],
-       scripts            = scripts,
-       version            = version,
+       version            = VERSION,
        zip_safe           = zip_safe)

test-requirements.txt

@@ -1 +0,0 @@
-pytest

test/Makefile

@@ -19,28 +19,36 @@ check:
 	@$(PYTHON) -V && PYTHON_VERSION=`$(PYTHON) -V 2>&1 | cut -d ' ' -f 2 | cut -d'.' -f1,2`; \
 	$(MAKE) check-$$PYTHON_VERSION
 
-#: Run working tests from Python 2.6
-check-2.6: check-bytecode-2.7 check-bytecode-2.5
-	$(PYTHON) test_pythonlib.py --bytecode-2.6 --verify $(COMPILE)
+#: Run working tests from Python 2.6 or 2.7
+check-2.6 check-2.7: check-bytecode check-2.7-ok
 
-#: Run working tests from Python 2.7
-check-2.7: check-bytecode check-2.7-ok
+#: Run working tests from Python 3.2
+check-3.2: check-bytecode
+	$(PYTHON) test_pythonlib.py --bytecode-3.2 --verify $(COMPILE)
 
 #: Run working tests from Python 3.3
-check-3.3: check-bytecode-3.3 check-bytecode-2.7
+check-3.3: check-bytecode
 	$(PYTHON) test_pythonlib.py --bytecode-3.3 --verify $(COMPILE)
 
+#: Run working tests from Python 3.5
+check-3.5: check-bytecode
+
 #: Run working tests from Python 3.4
-check-3.4: check-bytecode-2.7 check-bytecode-3.2
-	$(PYTHON) test_pythonlib.py --bytecode-3.4 --ok-2.7 --verify $(COMPILE)
+check-3.4: check-bytecode check-3.4-ok check-2.7-ok
+	$(PYTHON) test_pythonlib.py --bytecode-3.4 --verify $(COMPILE)
 
 #: Check deparsing only, but from a different Python version
 check-disasm:
 	$(PYTHON) dis-compare.py
 
+#: Check deparsing bytecode only
+check-bytecode-2:
+	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.6 --bytecode-2.7
+
 #: Check deparsing bytecode only
 check-bytecode:
-	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.7 --bytecode-3.2
+	$(PYTHON) test_pythonlib.py --bytecode-2.5 --bytecode-2.6 --bytecode-2.7 \
+        --bytecode-3.2 --bytecode-3.3 --bytecode-3.4 --bytecode-3.5
 
 #: Check deparsing Python 2.5
 check-bytecode-2.5:
@@ -66,6 +74,10 @@ check-bytecode-3.3:
 check-bytecode-3.4:
 	$(PYTHON) test_pythonlib.py --bytecode-3.4
 
+#: Check deparsing Python 3.5
+check-bytecode-3.5:
+	$(PYTHON) test_pythonlib.py --bytecode-3.5
+
 #: short tests for bytecodes only for this version of Python
 check-native-short:
 	$(PYTHON) test_pythonlib.py --bytecode-$(PYTHON_VERSION) --verify $(COMPILE)
@@ -74,6 +86,14 @@ check-native-short:
 check-2.7-ok:
 	$(PYTHON) test_pythonlib.py --ok-2.7 --verify $(COMPILE)
 
+#: Run longer Python 3.2's lib files known to be okay
+check-3.2-ok:
+	$(PYTHON) test_pythonlib.py --ok-3.2 --verify $(COMPILE)
+
+#: Run longer Python 3.4's lib files known to be okay
+check-3.4-ok:
+	$(PYTHON) test_pythonlib.py --ok-3.4 --verify $(COMPILE)
+
 clean: clean-py-dis clean-dis clean-unverified
 
 clean-dis:

test/base_tests/compile_tests

@@ -1,77 +0,0 @@
-#!/usr/bin/env python
-from __future__ import print_function
-
-"""
-compile_tests -- compile test patterns for the decompyle test suite
-"""
-
-import py_compile, os, sys, getopt
-
-work_dir = os.path.dirname(sys.argv[0])
-src_dir = work_dir
-
-opts, args = getopt.getopt(sys.argv[1:], 's:w:')
-
-for opt, val in opts:
-    if opt == '-s':
-        src_dir = val
-    if opt == '-w':
-        work_dir = val
-    else:
-        raise "Unknown Option '%s'" % opt
-if args:
-    raise 'This tool does not want any arguments'
-
-print("Using files in dir %s" % src_dir)
-print("Compiling into dir %s" % work_dir)
-
-tests = {}
-
-tests['1.5'] = ["class", "del", "docstring", 'empty', "exec",
-                "exceptions", "expressions", "functions", "global",
-                "globals", "import", "integers", "lambda", "loops",
-                "misc", "nested_elif", "prettyprint", "print",
-                'single_stmt', "slices", "tuple_params", 'tuples']
-
-tests['1.6'] = ["applyEquiv", ] + tests['1.5']
-
-tests['2.0'] = ["augmentedAssign", "extendedImport", "extendedPrint",
-                "import_as", "listComprehensions", 'print_to'] + \
-                tests['1.6'] # [ "--extendedarg", ]
-
-tests['2.1'] = ['loops2', 'nested_scopes'] + tests['2.0']
-
-tests['2.2'] = ['divide_future', 'divide_no_future', 'iterators',
-                'yield'] + tests['2.1']
-
-tests['2.3'] = tests['2.2']
-tests['2.5'] = tests['2.3']
-tests['2.6'] = tests['2.5']
-tests['2.7'] = ['mine'] + tests['2.6']
-tests['3.4'] = ['mine']
-total_tests = len(tests['2.7'])
-#tests['2.2'].sort(); print tests['2.2']
-
-extension = '.py' + (__debug__ and 'c' or 'o')
-
-def compile(file, target_dir):
-    sfile = os.path.join(src_dir,    'test_%s.py' % file)
-    cfile = os.path.join(target_dir, 'test_%s%s' % (file,  extension) )
-    py_compile.compile(sfile, cfile=cfile)
-
-def compile_for_version(version):
-    target_dir = os.path.join(work_dir, 'bytecode_' + version)
-    if not os.path.exists(target_dir):
-        os.mkdir(target_dir)
-    for file in tests[version]:
-        compile(file, target_dir)
-
-try:
-    version = '%i.%i' % sys.version_info[:2]
-except AttributeError:
-    version = sys.version[:3]
-
-print('Compiling test files for Python', version)
-print('(%i/%i files)' % (len(tests[version]), total_tests))
-compile_for_version(version)
-print('Done.')

test/base_tests/python2.7/test_applyEquiv.py

@@ -1,23 +0,0 @@
-
-def kwfunc(**kwargs):
-    print kwargs.items()
-
-def argsfunc(*args):
-    print args
-
-def no_apply(*args, **kwargs):
-    print args
-    print kwargs.items()
-    argsfunc(34)
-    foo = argsfunc(*args)
-    argsfunc(*args)
-    argsfunc(34, *args)
-    kwfunc(**kwargs)
-    kwfunc(x=11, **kwargs)
-    no_apply(*args, **kwargs)
-    no_apply(34, *args, **kwargs)
-    no_apply(x=11, *args, **kwargs)
-    no_apply(34, x=11, *args, **kwargs)
-    no_apply(42, 34, x=11, *args, **kwargs)
-
-no_apply(1,2,4,8,a=2,b=3,c=5)

test/base_tests/python2.7/test_augmentedAssign.py

@@ -1,45 +0,0 @@
-raise "This program can't be run"
-
-a = 1
-b = 2
-a += b; print a  # a = a+b = 3
-a -= b; print a  # a = a-b = 1
-a *= b; print a  # a = a*b = 2
-a -= a; print a  # a = a-a = 0
-a += 7*3; print a  # == 21
-
-l= [1,2,3]
-l[1] *= 3;    print l[1]; # 6
-l[1][2][3] = 7
-l[1][2][3] *= 3;
-l[:] += [9];  print l
-l[:2] += [9];  print l
-l[1:] += [9];  print l
-l[1:4] += [9];  print l
-l += [42,43]; print l
-
-a.value = 1
-a.value += 1;
-a.b.val = 1
-a.b.val += 1;
-
-l = []
-for i in range(3):
-    lj = []
-    for j in range(3):
-        lk = []
-        for k in range(3):
-            lk.append(0)
-        lj.append(lk)
-    l.append(lj)
-
-i = j = k = 1
-def f():
-    global i
-    i += 1
-    return i
-
-l[i][j][k] = 1
-i = 1
-l[f()][j][k] += 1
-print i, l

test/base_tests/python2.7/test_class.py

@@ -1,34 +0,0 @@
-
-class A:
-
-    class A1:
-        def __init__(self):
-            print 'A1.__init__'
-
-        def foo(self):
-            print 'A1.foo'
-
-    def __init__(self):
-        print 'A.__init__'
-        
-    def foo(self):
-        print 'A.foo'
-
-
-class B:
-    def __init__(self):
-        print 'B.__init__'
-
-    def bar(self):
-        print 'B.bar'
-
-
-class C(A,B):
-    def foobar(self):
-        print 'C.foobar'
-
-
-c = C()
-c.foo()
-c.bar()
-c.foobar()

test/base_tests/python2.7/test_del.py

@@ -1,24 +0,0 @@
-raise "This program can't be run"
-
-print 0
-a = b[5]
-print 1
-del a
-print 2
-del b[5]
-print 3
-
-del testme[1]
-print 4
-del testme[:]
-print '4a'
-del testme[:42]
-print '4b'
-del testme[40:42]
-print 5
-del testme[2:1024:10]
-print '5a'
-del testme[40,41,42]
-print 6
-del testme[:42, ..., :24:, 24, 100]
-print 7

test/base_tests/python2.7/test_divide_future.py

@@ -1,6 +0,0 @@
-from __future__ import division
-
-print '  1 // 2   =', 1 // 2
-print '1.0 // 2.0 =', 1.0 // 2.0
-print '  1 /  2   =', 1 / 2
-print '1.0 /  2.0 =', 1.0 / 2.0

test/base_tests/python2.7/test_divide_no_future.py

@@ -1,6 +0,0 @@
-#from __future__ import division
-
-print '  1 // 2   =', 1 // 2
-print '1.0 // 2.0 =', 1.0 // 2.0
-print '  1 /  2   =', 1 / 2
-print '1.0 /  2.0 =', 1.0 / 2.0

test/base_tests/python2.7/test_docstring.py

@@ -1,34 +0,0 @@
-
-'''
-This is a doc string
-'''
-
-def Doc_Test():
-	"""This has to be present"""
-
-class XXX:
-	def __init__(self):
-		"""__init__: This has to be present"""
-		self.a = 1
-
-		def XXX22():
-			"""XXX22: This has to be present"""
-			pass
-
-	def XXX11():
-		"""XXX22: This has to be present"""
-		pass
-
-	def XXX12():
-		foo = """XXX22: This has to be present"""
-		pass
-
-	def XXX13():
-		pass
-
-def Y11():
-	def Y22():
-		def Y33():
-			pass
-
-print __doc__

test/base_tests/python2.7/test_exceptions.py

@@ -1,107 +0,0 @@
-import dis
-
-def x11():
-    try:
-        a = 'try except'
-    except:
-        a = 2
-    b = '--------'
-
-
-def x12():
-    try:
-        a = 'try except else(pass)'
-    except:
-        a = 2
-    b = '--------'
-
-
-def x13():
-    try:
-        a = 'try except else(a=3)'
-    except:
-        a = 2
-    else:
-        a = 3
-    b = '--------'
-
-
-def x21():
-    try:
-        a = 'try KeyError'
-    except KeyError:
-        a = 8
-    b = '--------'
-
-
-def x22():
-    try:
-        a = 'try (IdxErr, KeyError) else(pass)'
-    except (IndexError, KeyError):
-        a = 8
-    b = '--------'
-
-
-def x23():
-    try:
-        a = 'try KeyError else(a=9)'
-    except KeyError:
-        a = 8
-    else:
-        a = 9
-    b = '--------'
-
-
-def x31():
-    try:
-        a = 'try KeyError IndexError'
-    except KeyError:
-        a = 8
-    except IndexError:
-        a = 9
-    b = '--------'
-
-
-def x32():
-    try:
-        a = 'try KeyError IndexError else(pass)'
-    except KeyError:
-        a = 8
-    except IndexError:
-        a = 9
-    b = '--------'
-
-
-def x33():
-    try:
-        a = 'try KeyError IndexError else(a=9)'
-    except KeyError:
-        a = 8
-    except IndexError:
-        a = 9
-    else:
-        a = 9
-    b = '#################'
-
-
-def x41():
-    if (a == 1):
-        a = 1
-    elif (b == 1):
-        b = 1
-    else:
-        c = 1
-    b = '#################'
-
-
-def x42():
-    if (a == 1):
-        a = 1
-    elif (b == 1):
-        b = 1
-    else:
-        c = 1
-    xxx = 'mmm'
-
-if (__name__ == '__main__'):
-    dis.dis(xx)

test/base_tests/python2.7/test_exec.py

@@ -1,5 +0,0 @@
-testcode = 'a = 12'
-
-exec testcode
-exec testcode in globals()
-exec testcode in globals(), locals()

test/base_tests/python2.7/test_expressions.py

@@ -1,10 +0,0 @@
-def _lsbStrToInt(str):
-        return ord(str[0]) + \
-               (ord(str[1]) << 8) + \
-               (ord(str[2]) << 16) + \
-               (ord(str[3]) << 24)
-
-def test(x):
-    return x
-
-test(a == b == c == 1)

test/base_tests/python2.7/test_extendedImport.py

@@ -1,10 +0,0 @@
-import os, sys as System, time
-import sys
-
-from rfc822 import Message as Msg822
-from mimetools import Message as MimeMsg, decode, choose_boundary as MimeBoundary
-
-import test.test_StringIO as StringTest
-
-for k, v in globals().items():
-    print `k`, v

test/base_tests/python2.7/test_extendedPrint.py

@@ -1,6 +0,0 @@
-import sys
-
-print >> sys.stdout, "Hello World"
-print >> sys.stdout, 1,2,3
-print >> sys.stdout, 1,2,3,
-print >> sys.stdout

test/base_tests/python2.7/test_functions.py

@@ -1,58 +0,0 @@
-def x0():
-    pass
-
-def x1(arg1):
-    pass
-
-def x2(arg1,arg2):
-    pass
-
-def x3a(*args):
-    pass
-
-def x3b(**kwargs):
-    pass
-
-def x3c(*args, **kwargs):
-    pass
-
-def x4a(foo, bar=1, bla=2, *args):
-    pass
-
-def x4b(foo, bar=1, bla=2, **kwargs):
-    pass
-
-def x4c(foo, bar=1, bla=2, *args, **kwargs):
-    pass
-
-def func_with_tuple_args((a,b)):
-    print a
-    print b
-
-def func_with_tuple_args2((a,b), (c,d)):
-    print a
-    print c
-
-def func_with_tuple_args3((a,b), (c,d), *args):
-    print a
-    print c
-
-def func_with_tuple_args4((a,b), (c,d), **kwargs):
-    print a
-    print c
-
-def func_with_tuple_args5((a,b), (c,d), *args, **kwargs):
-    print a
-    print c
-
-def func_with_tuple_args6((a,b), (c,d)=(2,3), *args, **kwargs):
-    print a
-    print c
-
-def func_ret1():
-    return 1 < 2 < 3
-    
-def read(size=0):
-    if size > 0 and size <= x - cur:
-        return 0
-    return 0

test/base_tests/python2.7/test_global.py

@@ -1,16 +0,0 @@
-i = 1; j = 7
-def a():
-    def b():
-        def c():
-            k = 34
-            global i
-            i = i+k
-        l = 42
-        c()
-        global j
-        j = j+l
-    b()
-    print i, j # should print 35, 49
-
-a()
-print i, j

test/base_tests/python2.7/test_globals.py

@@ -1,10 +0,0 @@
-def f():
-    print x  # would result in a 'NameError' or 'UnboundLocalError'
-    x = x+1
-    print x
-
-raise "This program can't be run"
-
-x = 1
-f()
-print x

test/base_tests/python2.7/test_import.py

@@ -1,11 +0,0 @@
-import sys
-import os, sys, BaseHTTPServer
-
-import test.test_MimeWriter
-
-from rfc822 import Message
-from mimetools import Message, decode, choose_boundary
-from os import *
-
-for k, v in globals().items():
-    print `k`, v

test/base_tests/python2.7/test_import_as.py

@@ -1,13 +0,0 @@
-import sys as SYS
-import os as OS, sys as SYSTEM, BaseHTTPServer as HTTPServ
-
-import test.test_MimeWriter as Mime_Writer
-
-from rfc822 import Message as MSG
-from mimetools import Message as mimeMsg, decode, \
-     choose_boundary as mimeBoundry
-
-print '---' * 20
-
-for k, v in globals().items():
-    print k, repr(v)

test/base_tests/python2.7/test_integers.py

@@ -1,22 +0,0 @@
-import sys
-#raise "This program can't be run"
-
-i = 1
-i = 42
-i = -1
-i = -42
-i = sys.maxint
-minint = -sys.maxint-1
-print sys.maxint
-print minint
-print long(minint)-1
-
-print
-i = -2147483647   # == -maxint
-print i, repr(i)
-i = i-1
-print i, repr(i)
-i = -2147483648L  # ==  minint   == -maxint-1
-print i, repr(i)
-i = -2147483649L  # ==  minint-1 == -maxint-2
-print i, repr(i)

test/base_tests/python2.7/test_iterators.py

@@ -1,11 +0,0 @@
-
-for i in range(20):
-    print i,
-
-print
-
-for i in range(10):
-    print i,
-    #if i == 10: break
-else:
-    print 'The End'

test/base_tests/python2.7/test_lambda.py

@@ -1,8 +0,0 @@
-palette = map(lambda a: (a,a,a), range(256))
-palette = map(lambda (r,g,b): chr(r)+chr(g)+chr(b), palette)
-palette = map(lambda r: r, palette)
-
-palette = lambda (r,g,b,): r
-palette = lambda (r): r
-palette = lambda r: r
-palette = lambda (r): r, palette

test/base_tests/python2.7/test_listComprehensions.py

@@ -1,30 +0,0 @@
-XXX = range(4)
-
-print [i for i in XXX]
-print
-print [i for i in (1,2,3,4,)]
-print
-print [i for i in [1,2,3,4,]]
-print
-print [(i,1) for i in XXX]
-print
-print [i*2 for i in range(4)]
-print
-print [i*j for i in range(4)
-       for j in range(7)]
-print [i*2 for i in range(4) if i == 0 ]
-print [(i,i**2) for i in range(4) if (i % 2) == 0 ]
-print [i*j for i in range(4)
-       if i == 2
-       for j in range(7)
-       if (i+i % 2) == 0 ]
-
-seq1 = 'abc'
-seq2 = (1,2,3)
-
-[ (x,y) for x in seq1 for y in seq2 ]
-
-def flatten1(seq):
-    return [x for subseq in seq for x in subseq]
-
-print flatten1([[0], [1,2,3], [4,5], [6,7,8,9], []])

test/base_tests/python2.7/test_loops.py

@@ -1,58 +0,0 @@
-for i in range(10):
-    if i == 3:
-        continue
-    if i == 5:
-        break
-    print i,
-else:
-    print 'Else'
-print
-
-for i in range(10):
-    if i == 3:
-        continue
-    print i,
-else:
-    print 'Else'
-
-i = 0
-while i < 10:
-    i = i+1
-    if i == 3:
-        continue
-    if i == 5:
-        break
-    print i,
-else:
-    print 'Else'
-print
-
-i = 0
-while i < 10:
-    i = i+1
-    if i == 3:
-        continue
-    print i,
-else:
-    print 'Else'
-    
-for x, y in [(1,2),(3,4)]:
-    if x in ['==', '>=', '>']:
-        if '0' in y:
-            print
-
-for x in (1, 2, 3):
-    if x == 1:
-        print x
-
-i = 0
-while i < 10:
-    i+=1
-    for x in (1,2,3):
-        for y in (1,2,3):
-            if x == y and x == 1:
-                while i < 10:
-                    print x
-                    break
-
-

test/base_tests/python2.7/test_loops2.py

@@ -1,10 +0,0 @@
-# This is a seperate test pattern, since 'continue' within 'try'
-# was not allowed till Python 2.1
-
-for term in args:
-    try:
-        print
-        continue
-        print
-    except:
-        pass

test/base_tests/python2.7/test_mine.py

@@ -1,5 +0,0 @@
-sum(i*i for i in range(10))
-
-sum(x*y for x,y in zip(xvec, yvec))
-
-

test/base_tests/python2.7/test_misc.py

@@ -1,23 +0,0 @@
-raise "This program can't be run"
-
-class A:
-    def __init__(self, num):
-        self.num = num
-    def __repr__(self):
-        return str(self.num)
-
-b = []
-for i in range(10):
-    b.append(A(i))
-
-for i in  ('CALL_FUNCTION', 'CALL_FUNCTION_VAR',
-           'CALL_FUNCTION_VAR_KW', 'CALL_FUNCTION_KW'):
-    print i, '\t', len(i), len(i)-len('CALL_FUNCTION'),
-    print (len(i)-len('CALL_FUNCTION')) / 3, 
-    print i[len('CALL_FUNCTION'):]
-
-p2 = (0, 0, None)
-if p2[2]:
-    print 'has value'
-else:
-    print ' no value'

test/base_tests/python2.7/test_nested_elif.py

@@ -1,81 +0,0 @@
-a = None
-
-if a == 1:
-    print '1'
-elif a == 2:
-    print '2'
-
-if a == 1:
-    print '1'
-elif a == 2:
-    print '2'
-else:
-    print 'other'
-
-if a == 1:
-    print '1'
-elif a == 2:
-    print '2'
-elif a == 3:
-    print '3'
-else:
-    print 'other'
-
-if a == 1:
-    print '1'
-elif a == 2:
-    print '2'
-elif a == 3:
-    print '3'
-
-if a == 1:
-    print '1'
-else:
-    if a == 2:
-        print '2'
-    else:
-        if a == 3:
-            print '3'
-        else:
-            print 'other'
-
-if a == 1:
-    print '1'
-else:
-    if a == 2:
-        print '2'
-    else:
-        print 'more'
-        if a == 3:
-            print '3'
-        else:
-            print 'other'
-
-if a == 1:
-    print '1'
-else:
-    print 'more'
-    if a == 2:
-        print '2'
-    else:
-        if a == 3:
-            print '3'
-        else:
-            print 'other'
-
-if a == 1:
-    print '1'
-else:
-    print 'more'
-    if a == 2:
-        print '2'
-    else:
-        print 'more'
-        if a == 3:
-            print '3'
-        elif a == 4:
-            print '4'
-        elif a == 4:
-            print '4'
-        else:
-            print 'other'

test/base_tests/python2.7/test_nested_scopes.py

@@ -1,87 +0,0 @@
-from __future__ import nested_scopes
-
-blurb = 1
-
-def k0():
-    def l0(m=1):
-        print
-    l0()
-
-def x0():
-    def y0():
-        print
-    y0()
-
-def x1():
-     def y1():
-         print 'y-blurb =', blurb
-     y1()
-
-def x2():
-    def y2():
-        print
-    blurb = 2
-    y2()
-
-def x3a():
-    def y3a(x):
-        print 'y-blurb =', blurb, flurb
-    print
-    blurb = 3
-    flurb = 7
-    y3a(1)
-    print 'x3a-blurb =', blurb
-
-def x3():
-    def y3(x):
-        def z():
-            blurb = 25
-            print 'z-blurb =', blurb,
-        z()
-        print 'y-blurb =', blurb,
-    print
-    blurb = 3
-    y3(1)
-    print 'x3-blurb =', blurb
-
-def x3b():
-    def y3b(x):
-        def z():
-            print 'z-blurb =', blurb,
-        blurb = 25
-        z()
-        print 'y-blurb =', blurb,
-    print
-    blurb = 3
-    y3b(1)
-    print 'x3-blurb =', blurb
-
-def x4():
-    def y4(x):
-        def z():
-            print 'z-blurb =', blurb
-        z()
-    global blurb
-    blurb = 3
-    y4(1)
-
-def x():
-    def y(x):
-        print 'y-blurb =', blurb
-    blurb = 2
-    y(1)
-
-
-def func_with_tuple_args6((a,b), (c,d)=(2,3), *args, **kwargs):
-    def y(x):
-        print 'y-a =', a
-    print c
-
-def find(self, name):
-    # This is taken from 'What's new in Python 2.1' by amk
-    L = filter(lambda x, name: x == name, self.list_attribute)
-
-x0(); x1(); x2();
-x3(); x3a(); x3b();
-x4(); x()
-print 'blurb =', blurb

test/base_tests/python2.7/test_prettyprint.py

@@ -1,128 +0,0 @@
-import pprint
-
-aa = 'aa'
-
-dict0 = {
-    'a': 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-    'b': 1234,
-    'd': aa,
-    aa: aa
-    }
-
-
-dict = {
-    'a': 'aaa',
-    'b': 1234,
-    'c': { 'ca': 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-           'cb': 1234,
-           'cc': None
-           },
-    'd': aa,
-    aa: aa,
-    'eee': { 'ca': 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-           'cb': 1234,
-           'cc': None
-           },
-    'ff': aa,
-    }
-list1 = [ '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-          aa,
-          '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-          '1ccccccccccccccccccccccccccccccccccccccccccc' ]
-list2 = [ '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-          [ '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-            aa,
-            '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-            '22ccccccccccccccccccccccccccccccccccccccccccc' ],
-          'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-          'ccccccccccccccccccccccccccccccccccccccccccc' ]
-tuple1 = ( '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-           aa,
-           '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-           '1ccccccccccccccccccccccccccccccccccccccccccc' )
-tuple2 = ( '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-           ( '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-             aa,
-             '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-             '22ccccccccccccccccccccccccccccccccccccccccccc' ),
-           'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-           'ccccccccccccccccccccccccccccccccccccccccccc' )
-
-def funcA():
-    dict = {
-        'a': 'aaa',
-        'b': 1234,
-        'c': { 'ca': 'aaa',
-               'cb': 1234,
-               'cc': None
-               },
-        'd': aa,
-        aa: aa
-        }
-    list1 = [ '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-              '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-              aa,
-              '1ccccccccccccccccccccccccccccccccccccccccccc' ]
-    list2 = [ '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-              [ '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                aa,
-                '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                '22ccccccccccccccccccccccccccccccccccccccccccc' ],
-              'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-              'ccccccccccccccccccccccccccccccccccccccccccc' ]
-    tuple1 = ( '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-               '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-               aa,
-               '1ccccccccccccccccccccccccccccccccccccccccccc' )
-    tuple2 = ( '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-               ( '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                 aa,
-                 '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                 '22ccccccccccccccccccccccccccccccccccccccccccc' ),
-               'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-               'ccccccccccccccccccccccccccccccccccccccccccc' )
-
-    def funcAB():
-        dict = {
-            'a': 'aaa',
-            'b': 1234,
-            'c': { 'ca': 'aaa',
-                   'cb': 1234,
-                   'cc': None
-                   },
-            'd': aa,
-            aa: aa
-            }
-        list1 = [ '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                  '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                  '1ccccccccccccccccccccccccccccccccccccccccccc' ]
-        list2 = [ '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                  [ '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                    '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                    '22ccccccccccccccccccccccccccccccccccccccccccc' ],
-                  'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                  'ccccccccccccccccccccccccccccccccccccccccccc' ]
-        tuple1 = ( '1aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                   '1bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                   '1ccccccccccccccccccccccccccccccccccccccccccc' )
-        tuple2 = ( '2aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                   ( '22aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa',
-                     '22bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                     '22ccccccccccccccccccccccccccccccccccccccccccc' ),
-                   'bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb',
-                   'ccccccccccccccccccccccccccccccccccccccccccc' )
-
-pprint.pprint(dict0)
-print
-pprint.pprint(dict)
-print
-
-pprint = pprint.PrettyPrinter(indent=2)
-pprint.pprint(dict0)
-print
-pprint.pprint(dict)
-print
-
-pprint.pprint(list1)
-print
-pprint.pprint(list2)

test/base_tests/python2.7/test_print.py

@@ -1,9 +0,0 @@
-
-print 1,2,3,4,5
-a = b + 5
-print 1,2,3,4,5
-print 1,2,3,4,5
-print
-print
-print 1,2,3,4,5
-print

test/base_tests/python2.7/test_print_to.py

@@ -1,13 +0,0 @@
-
-import sys
-
-print >>sys.stdout, 1,2,3,4,5
-
-print >>sys.stdout, 1,2,3,4,5,
-print >>sys.stdout
-
-print >>sys.stdout, 1,2,3,4,5,
-print >>sys.stdout, 1,2,3,4,5,
-print >>sys.stdout
-
-print >>sys.stdout

test/base_tests/python2.7/test_single_stmt.py

@@ -1 +0,0 @@
-print 5

test/base_tests/python2.7/test_slices.py

@@ -1,32 +0,0 @@
-raise "This program can't be run"
-
-testme[1]
-testme[1] = 1
-del testme[1]
-
-testme[:42]
-testme[:42] = "The Answer"
-del testme[:42]
-
-testme[2:1024:]
-testme[:1024:10]
-testme[::]
-testme[2:1024:10]
-testme[2:1024:10] = "A lot"
-del testme[2:1024:10]
-
-testme[:42, ..., :24:, 24, 100]
-testme[:42, ..., :24:, 24, 100] = "Strange"
-del testme[:42, ..., :24:, 24, 100]
-
-testme[:]
-testme[:] = 'Take all'
-del testme[:]
-
-testme[40:42]
-testme[40:42] = 'Three'
-del testme[40:42]
-
-testme[40,41,42]
-testme[40,41,42] = 'Another Three'
-del testme[40,41,42]

test/base_tests/python2.7/test_tuple_params.py-notyet

@@ -1,14 +0,0 @@
-def A(a,b,(x,y,z),c):
-    pass
-
-def B(a,b=42,(x,y,z)=(1,2,3),c=17):
-    pass
-
-def C((x,y,z)):
-    pass
-
-def D((x,)):
-    pass
-
-def E((x)):
-    pass

test/base_tests/python2.7/test_tuples.py-notyet

@@ -1,20 +0,0 @@
-a = (1,)
-b = (2,3)
-a,b = (1,2)
-a,b = ( (1,2), (3,4,5) )
-
-x = {}
-try:
-    x[1,2,3]
-except:
-    pass
-
-x[1,2,3] = 42
-print x[1,2,3]
-print x[(1,2,3)]
-assert x[(1,2,3)] == x[1,2,3]
-del x[1,2,3]
-
-x=[1,2,3]
-b=(1 for i in x if i)
-b=(e for i in range(4) if i == 2)

test/base_tests/python2.7/test_yield.py

@@ -1,22 +0,0 @@
-from __future__ import generators
-
-def inorder(t):
-    if t:
-        for x in inorder(t.left):
-            yield x
-        yield t.label
-        for x in inorder(t.right):
-            yield x
-
-def generate_ints(n):
-    for i in range(n):
-        yield i*2
-
-for i in generate_ints(5):
-    print i,
-print
-gen = generate_ints(3)
-print gen.next(),
-print gen.next(),
-print gen.next(),
-print gen.next()