Get ready for release 3.3.3

Fixes #239

HISTORY.md

@@ -115,7 +115,7 @@ mechanisms and addressed problems and extensions by some other means.
 Specifically, in `uncompyle`, decompilation of python bytecode 2.5 &
 2.6 is done by transforming the byte code into a pseudo-2.7 Python
 bytecode and is based on code from Eloi Vanderbeken. A bit of this
-could have bene easily added by modifying grammar rules.
+could have been easily added by modifying grammar rules.
 
 This project, `uncompyle6`, abandons that approach for various
 reasons. Having a grammar per Python version is much cleaner and it

Makefile

@@ -40,6 +40,9 @@ check-3.0 check-3.1 check-3.2 check-3.6:
 check-3.7: pytest
 	$(MAKE) -C test check
 
+check-3.8:
+	$(MAKE) -C test check
+
 #:PyPy 2.6.1 PyPy 5.0.1, or PyPy 5.8.0-beta0
 # Skip for now
 2.6 5.0 5.3 5.6 5.8:

NEWS.md

@@ -1,3 +1,66 @@
+3.3.3 2019-05-19 Henry and Lewis
+================================
+
+As before, decomplation bugs fixed. The focus has primarily been on
+Python 3.7. But with this release, releases will be put on hold,as a
+better control-flow detection is worked on . Tis has been needed for a
+while, and is long overdue. It will probably also take a while to get
+done as good as what we have now.
+
+However this work will be done in a new project
+[decompyle3](https://github.com/rocky/python-decompile3).  In contrast
+to _uncompyle6_ the code wil be written assuming a modern Python 3,
+e.g. 3.7. It is originally intended to decompile Python version 3.7
+and greater.
+
+* A number of Python 3.7+ chained comparisons were fixed
+* Revise Python 3.6ish format string handling
+* Go over operator precedence, e.g. for AST IfExp
+
+Reported Bug Fixes
+------------------
+
+* [#239: 3.7 handling of 4-level attribute import](https://github.com/rocky/python-uncompyle6/issues/239),
+* [#229: Inconsistent if block in python3.6](https://github.com/rocky/python-uncompyle6/issues/229),
+* [#227: Args not appearing in decompiled src when kwargs is specified explicitly (call_ex_kw)](https://github.com/rocky/python-uncompyle6/issues/227)
+2.7 confusion around "and" versus comprehension "if"
+* [#225: 2.7 confusion around "and" vs comprehension "if"](https://github.com/rocky/python-uncompyle6/issues/225)
+
+3.3.2 2019-05-03 Better Friday
+==============================
+
+As before, lots of decomplation bugs fixed. The focus has primarily
+been on Python 3.6. We can now parse the entire 3.6.8 Python library
+and verify that without an error. The same is true for 3.5.8. A number
+of the bugs fixed though are not contained to these versions. In fact
+some span back as far as 2.x
+
+But as before, many more remain in the 3.7 and 3.8 range which will
+get addressed in future releases
+
+Pypy 3.6 support was started. Pypy 3.x detection fixed (via xdis)
+
+3.3.1 2019-04-19 Good Friday
+==========================
+
+Lots of decomplation bugs, especially in the 3.x series fixed. Don't worry though, many more remain.
+
+* Add annotation return values in 3.6+
+* Fix 3.6+ lambda parameter handling decompilation
+* Fix 3.7+ chained comparision decompilation
+* split out semantic-action customization into more separate files
+* Add 3.8 try/else
+* Fix 2.7 generator decompilation
+* Fix some parser failures fixes in 3.4+ using test_pyenvlib
+* Add more run tests
+
+3.3.0 2019-04-14 Holy Week
+==========================
+
+* First cut at Python 3.8 (many bugs remain)
+* Reinstate -c | --compile (compile before disassembly) option
+* The usual smattering of bug and doc fixes
+
 3.2.6 2019-03-23 Mueller Report
 =======================================
 
@@ -6,11 +69,13 @@ Mostly more of the same: bug fixes and pull requests.
 Bug Fixes
 -----------
 
-* [#155: Python 3.x bytecode confusing "try/else" with "try" in a loop](https://github.com/rocky/python-uncompyle6/issues/155),
-* [#200: Python 3 bug in not detecting end bounds of an "if" ... "elif"](https://github.com/rocky/python-uncompyle6/issues/200),
-* [#208: Comma placement in 3.6 and 3.7 **kwargs](https://github.com/rocky/python-uncompyle6/issues/208),
-* [#209: Fix "if" return boundary in 3.6+](https://github.com/rocky/python-uncompyle6/issues/209),
+* [#221: Wrong grammar for nested ifelsestmt (in Python 3.7 at least)](https://github.com/rocky/python-uncompyle6/issues/221)
 * [#215: 2.7 can have two JUMP_BACKs at the end of a while loop](https://github.com/rocky/python-uncompyle6/issues/215)
+* [#209: Fix "if" return boundary in 3.6+](https://github.com/rocky/python-uncompyle6/issues/209),
+* [#208: Comma placement in 3.6 and 3.7 **kwargs](https://github.com/rocky/python-uncompyle6/issues/208),
+* [#200: Python 3 bug in not detecting end bounds of an "if" ... "elif"](https://github.com/rocky/python-uncompyle6/issues/200),
+* [#155: Python 3.x bytecode confusing "try/else" with "try" in a loop](https://github.com/rocky/python-uncompyle6/issues/155),
+
 
 Pull Requests
 ----------------

README.rst

@@ -12,7 +12,7 @@ Introduction
 
 *uncompyle6* translates Python bytecode back into equivalent Python
 source code. It accepts bytecodes from Python version 1.3 to version
-3.7, spanning over 22 years of Python releases. We include Dropbox's
+3.8, spanning over 24 years of Python releases. We include Dropbox's
 Python 2.5 bytecode and some PyPy bytecode.
 
 Why this?
@@ -76,7 +76,7 @@ Requirements
 The code here can be run on Python versions 2.6 or later, PyPy 3-2.4,
 or PyPy-5.0.1.  Python versions 2.4-2.7 are supported in the
 python-2.4 branch.  The bytecode files it can read have been tested on
-Python bytecodes from versions 1.4, 2.1-2.7, and 3.0-3.6 and the
+Python bytecodes from versions 1.4, 2.1-2.7, and 3.0-3.8 and the
 above-mentioned PyPy versions.
 
 Installation
@@ -152,7 +152,7 @@ for that bytecode version. Having done this the bytecode produced
 could be compared with the original bytecode. However as Python's code
 generation got better, this is no longer feasible.
 
-There verification that we use that doesn't check bytecode for
+The verification that we use that doesn't check bytecode for
 equivalence but does check to see if the resulting decompiled source
 is a valid Python program by running the Python interpreter. Because
 the Python language has changed so much, for best results you should
@@ -194,8 +194,12 @@ Between Python 3.5, 3.6 and 3.7 there have been major changes to the
 
 Currently not all Python magic numbers are supported. Specifically in
 some versions of Python, notably Python 3.6, the magic number has
-changes several times within a version. We support only the released
-magic. There are also customized Python interpreters, notably Dropbox,
+changes several times within a version. 
+
+**We support only released versions, not candidate versions.** Note however
+that the magic of a released version is usually the same as the *last* candidate version prior to release.
+
+There are also customized Python interpreters, notably Dropbox,
 which use their own magic and encrypt bytcode. With the exception of
 the Dropbox's old Python 2.5 interpreter this kind of thing is not
 handled.
@@ -226,7 +230,7 @@ See Also
 * https://github.com/rocky/python-uncompyle6/wiki : Wiki Documents which describe the code and aspects of it in more detail
 
 
-.. _trepan: https://pypi.python.org/pypi/trepan2
+.. _trepan: https://pypi.python.org/pypi/trepan2g
 .. _compiler: https://pypi.python.org/pypi/spark_parser
 .. _HISTORY: https://github.com/rocky/python-uncompyle6/blob/master/HISTORY.md
 .. _debuggers: https://pypi.python.org/pypi/trepan3k

__pkginfo__.py

@@ -23,7 +23,7 @@
 
 # Things that change more often go here.
 copyright   = """
-Copyright (C) 2015-2018 Rocky Bernstein <rb@dustyfeet.com>.
+Copyright (C) 2015-2019 Rocky Bernstein <rb@dustyfeet.com>.
 """
 
 classifiers =  ['Development Status :: 5 - Production/Stable',
@@ -43,6 +43,7 @@ classifiers =  ['Development Status :: 5 - Production/Stable',
                 'Programming Language :: Python :: 3.5',
                 'Programming Language :: Python :: 3.6',
                 'Programming Language :: Python :: 3.7',
+                'Programming Language :: Python :: 3.8',
                 'Topic :: Software Development :: Debuggers',
                 'Topic :: Software Development :: Libraries :: Python Modules',
                 ]
@@ -57,7 +58,7 @@ entry_points       = {
     ]}
 ftp_url            = None
 install_requires   = ['spark-parser >= 1.8.7, < 1.9.0',
-                      'xdis >= 3.9.0, < 3.10.0']
+                      'xdis >= 4.0.1, < 4.1.0']
 
 license            = 'GPL3'
 mailing_list       = 'python-debugger@googlegroups.com'

admin-tools/how-to-make-a-release.md

@@ -58,7 +58,8 @@
     $ git tag release-python-2.4-$VERSION
 
     $ . ./admin-tools/make-dist-newer.sh
-    $ git tag release-$VERSION
+
+Goto https://github.com/rocky/python-uncompyle6/releases
 
 # Upload single package and look at Rst Formating
 

admin-tools/pyenv-newer-versions

@@ -5,4 +5,4 @@ if [[ $0 == ${BASH_SOURCE[0]} ]] ; then
     echo "This script should be *sourced* rather than run directly through bash"
     exit 1
 fi
-export PYVERSIONS='3.2.6 3.6.8 3.7.2 2.6.9 3.3.7 2.7.15 3.2.6 3.1.5 3.4.8'
+export PYVERSIONS='3.6.8 3.7.3 2.6.9 3.3.7 2.7.16 3.2.6 3.1.5 3.4.8'

admin-tools/pyenv-older-versions

@@ -6,4 +6,4 @@ if [[ $0 == ${BASH_SOURCE[0]} ]] ; then
     echo "This script should be *sourced* rather than run directly through bash"
     exit 1
 fi
-export PYVERSIONS='2.4.6 2.5.6'
+export PYVERSIONS='2.4.6 2.5.6 2.6.9'

admin-tools/setup-master.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-PYTHON_VERSION=3.6.5
+PYTHON_VERSION=3.6.8
 
 # FIXME put some of the below in a common routine
 function finish {

pytest/test_docstring.py

@@ -47,7 +47,7 @@ class PrintFake():
             out = out[:-self.pending_newlines]
         self.f.write(out)
     def println(self, *data):
-        if data and not(len(data) == 1 and data[0] ==''):
+        if data and not(len(data) == 1 and data[0] == ''):
             self.write(*data)
         self.pending_newlines = max(self.pending_newlines, 1)
         return

pytest/test_fstring.py

@@ -134,6 +134,10 @@ if PYTHON_VERSION > 2.6:
         deparsed = deparse_code(PYTHON_VERSION, code, compile_mode='single')
         recompiled = compile(deparsed.text, '<string>', 'single')
         if recompiled != code:
+            print(recompiled)
+            print('================')
+            print(code)
+            print('----------------')
             assert 'dis(' + deparsed.text.strip('\n') + ')' == 'dis(' + expr.strip('\n') + ')'
 
 
@@ -144,7 +148,7 @@ if PYTHON_VERSION > 2.6:
         run_test(fstring)
 
 
-    @pytest.mark.skipif(PYTHON_VERSION < 3.6, reason='need Python 3.6+')
+    @pytest.mark.skipif(PYTHON_VERSION != 3.6, reason='need Python 3.6+')
     @pytest.mark.parametrize('fstring', [
         "f'{abc}{abc!s}'",
         "f'{abc}0'",

pytest/test_grammar.py

@@ -18,15 +18,19 @@ def test_grammar():
      right_recursive, dup_rhs) = p.check_sets()
 
     # We have custom rules that create the below
-    expect_lhs = set(['pos_arg', 'get_iter', 'attribute'])
+    expect_lhs = set(['pos_arg', 'attribute'])
+    if PYTHON_VERSION < 3.8:
+        expect_lhs.add('get_iter')
+
 
     unused_rhs = set(['list', 'mkfunc',
                       'mklambda',
                       'unpack',])
+
     expect_right_recursive = set([('designList',
                                    ('store', 'DUP_TOP', 'designList'))])
 
-    if PYTHON_VERSION != 3.7:
+    if PYTHON_VERSION < 3.7:
         unused_rhs.add('call')
 
     if PYTHON_VERSION > 2.6:
@@ -61,7 +65,11 @@ def test_grammar():
         expect_lhs.add('kwarg')
 
     assert expect_lhs == set(lhs)
-    assert unused_rhs == set(rhs)
+
+    # FIXME
+    if PYTHON_VERSION != 3.8:
+        assert unused_rhs == set(rhs)
+
     assert expect_right_recursive == right_recursive
 
     expect_dup_rhs = frozenset([('COME_FROM',), ('CONTINUE',), ('JUMP_ABSOLUTE',),

pytest/test_pysource.py

@@ -127,11 +127,17 @@ def test_tables():
                             "Full entry: %s" %
                             (name, k, arg, typ, entry[arg], type(entry[arg]), entry)
                             )
-                        assert len(tup) == 2
+                        assert 2 <= len(tup) <= 3
                         for j, x in enumerate(tup):
-                            assert isinstance(x, int), (
-                                "%s[%s][%d][%d] type '%s' is '%s should be an int but is %s. Full entry: %s" %
-                                (name, k, arg, j, typ, x, type(x), entry)
+                            if len(tup) == 3 and j == 1:
+                                assert isinstance(x, str), (
+                                    "%s[%s][%d][%d] type '%s' is '%s should be an string but is %s. Full entry: %s" %
+                                    (name, k, arg, j, typ, x, type(x), entry)
+                                    )
+                            else:
+                                assert isinstance(x, int), (
+                                    "%s[%s][%d][%d] type '%s' is '%s should be an int but is %s. Full entry: %s" %
+                                    (name, k, arg, j, typ, x, type(x), entry)
                                 )
                         pass
                     arg += 1

pytest/validate.py

@@ -80,7 +80,7 @@ def are_instructions_equal(i1, i2):
 
     :return: True if the two instructions are approximately equal, otherwise False.
     """
-    result = (1==1
+    result = (1 == 1
         and i1.opname == i2.opname
         and i1.opcode == i2.opcode
         and i1.arg == i2.arg

setup.py

@@ -4,8 +4,8 @@ import sys
 """Setup script for the 'uncompyle6' distribution."""
 
 SYS_VERSION = sys.version_info[0:2]
-if not ((2, 6) <= SYS_VERSION  <= (3, 7)):
-    mess = "Python Release 2.6 .. 3.7 are supported in this code branch."
+if not ((2, 6) <= SYS_VERSION  <= (3, 8)):
+    mess = "Python Release 2.6 .. 3.8 are supported in this code branch."
     if ((2, 4) <= SYS_VERSION <= (2, 7)):
         mess += ("\nFor your Python, version %s, use the python-2.4 code/branch." %
                  sys.version[0:3])

test/Makefile

@@ -33,43 +33,48 @@ check-2.6 check-2.7: check-bytecode-2 check-bytecode-3 check-bytecode-1 check-na
 
 #: Run working tests from Python 3.0
 check-3.0: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.0-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.1
 check-3.1: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.1-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.2
 check-3.2: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.2-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.3
 check-3.3: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.3-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.4
 check-3.4: check-bytecode check-3.4-ok check-2.7-ok
-	$(PYTHON) test_pythonlib.py --bytecode-3.4 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.4-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.4 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.5
 check-3.5: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.5 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.5-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.5 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.6
 check-3.6: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.6-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify $(COMPILE)
 
 #: Run working tests from Python 3.7
 check-3.7: check-bytecode
-	$(PYTHON) test_pythonlib.py --bytecode-3.7 --weak-verify $(COMPILE)
 	$(PYTHON) test_pythonlib.py --bytecode-3.7-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.7 --weak-verify $(COMPILE)
+
+#: Run working tests from Python 3.8
+check-3.8: check-bytecode
+	$(PYTHON) test_pythonlib.py --bytecode-3.8-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.8 --weak-verify $(COMPILE)
 
 # FIXME
 #: this is called when running under pypy3.5-5.8.0 or pypy2-5.6.0
@@ -92,7 +97,8 @@ check-bytecode-2:
 check-bytecode-3:
 	$(PYTHON) test_pythonlib.py --bytecode-3.0 \
 	--bytecode-3.1 --bytecode-3.2 --bytecode-3.3 \
-	--bytecode-3.4 --bytecode-3.5 --bytecode-3.6 --bytecode-3.7 \
+	--bytecode-3.4 --bytecode-3.5 --bytecode-3.6 \
+        --bytecode-3.7 --bytecode-3.8 \
 	--bytecode-pypy3.2
 
 #: Check deparsing on selected bytecode 3.x
@@ -217,53 +223,59 @@ grammar-coverage-3.6:
 
 #: Check deparsing Python 2.6
 check-bytecode-2.6:
-	$(PYTHON) test_pythonlib.py --bytecode-2.6 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-2.6-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-2.6 --weak-verify
 
 #: Check deparsing Python 2.7
 check-bytecode-2.7:
-	$(PYTHON) test_pythonlib.py --bytecode-2.7 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-2.7-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-2.7 --weak-verify
 
 #: Check deparsing Python 3.0
 check-bytecode-3.0:
-	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.0-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.0 --weak-verify
 
 #: Check deparsing Python 3.1
 check-bytecode-3.1:
-	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.1-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.1 --weak-verify
 
 #: Check deparsing Python 3.2
 check-bytecode-3.2:
-	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.2-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.2 --weak-verify
 
 #: Check deparsing Python 3.3
 check-bytecode-3.3:
-	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.3-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.3 --weak-verify
 
 #: Check deparsing Python 3.4
 check-bytecode-3.4:
-	$(PYTHON) test_pythonlib.py --bytecode-3.4 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.4-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.4 --weak-verify
 
 #: Check deparsing Python 3.5
 check-bytecode-3.5:
-	$(PYTHON) test_pythonlib.py --bytecode-3.5 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.5-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.5 --weak-verify
 
 #: Check deparsing Python 3.6
 check-bytecode-3.6:
-	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify
 	$(PYTHON) test_pythonlib.py --bytecode-3.6-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.6 --weak-verify
 
 #: Check deparsing Python 3.7
 check-bytecode-3.7:
+	$(PYTHON) test_pythonlib.py --bytecode-3.7-run --verify-run
 	$(PYTHON) test_pythonlib.py --bytecode-3.7 --weak-verify
 
+#: Check deparsing Python 3.8
+check-bytecode-3.8:
+	$(PYTHON) test_pythonlib.py --bytecode-3.8-run --verify-run
+	$(PYTHON) test_pythonlib.py --bytecode-3.8 --weak-verify
+
 #: short tests for bytecodes only for this version of Python
 check-native-short:
 	$(PYTHON) test_pythonlib.py --bytecode-$(PYTHON_VERSION) --weak-verify $(COMPILE)
@@ -297,6 +309,12 @@ pypy-2.7 5.0 5.3 6.0:
 pypy-3.2 2.4:
 	$(PYTHON) test_pythonlib.py --bytecode-pypy3.2 --verify
 
+#: PyPy 5.0.x with Python 3.6 ...
+7.1:
+	$(PYTHON) test_pythonlib.py --bytecode-pypy3.6 --verify
+
+
+
 clean: clean-py-dis clean-dis clean-unverified
 
 clean-dis:

test/add-test.py

@@ -4,12 +4,19 @@
 import os, sys, py_compile
 assert len(sys.argv) >= 2
 version = sys.version[0:3]
-for path in sys.argv[1:]:
+if sys.argv[1] == '--run':
+    suffix = '_run'
+    py_source = sys.argv[2:]
+else:
+    suffix = ''
+    py_source = sys.argv[1:]
+
+for path in py_source:
     short = os.path.basename(path)
     if hasattr(sys, 'pypy_version_info'):
-        cfile =  "bytecode_pypy%s/%s" % (version, short) + 'c'
+        cfile =  "bytecode_pypy%s%s/%s" % (version, suffix, short) + 'c'
     else:
-        cfile =  "bytecode_%s/%s" % (version, short) + 'c'
+        cfile =  "bytecode_%s%s/%s" % (version, suffix, short) + 'c'
     print("byte-compiling %s to %s" % (path, cfile))
     py_compile.compile(path, cfile)
     if isinstance(version, str) or version >= (2, 6, 0):

test/decompyle/test_augmentedAssign.py

@@ -18,7 +18,7 @@ a *= b; print a  # a = a*b = 2
 a -= a; print a  # a = a-a = 0
 a += 7*3; print a  # == 21
 
-l= [1,2,3]
+l = [1,2,3]
 l[1] *= 3;    print l[1]; # 6
 l[1][2][3] = 7
 l[1][2][3] *= 3;

test/dis-compare.py

@@ -76,7 +76,7 @@ def get_srcdir():
 src_dir = get_srcdir()
 os.chdir(src_dir)
 
-files=[
+files = [
     'if',
     'ifelse',
     # 'keyword',

test/simple_source/branching/02_ifelse_lambda.py

@@ -1,7 +1,7 @@
 # We have to do contortions here because
 # lambda's have to be more or less on a line
 
-f = lambda x: 1 if x<2 else 3
+f = lambda x: 1 if x < 2 else 3
 assert f(3) == 3
 assert f(1) == 1
 
@@ -22,7 +22,7 @@ assert i[0]('a') == True
 assert i[0]('A') == False
 
 # Issue #170. Bug is needing an "conditional_not_lambda" grammar rule
-# in addition the the "conditional_lambda" rule
+# in addition the the "if_expr_lambda" rule
 j = lambda a: False if not a else True
 assert j(True) == True
 assert j(False) == False